Reviews
Fits: KAWASAKI Z, KAWASAKI Z1, KAWASAKI Z2
SSItoCaliper support
The installation was very easy, as the center of Caliper came out without any fine tuning using .Shim because of the good accuracy of Support.
The included Bolt also has a hole drilled for wiring, so wiring comes out as it is, so it is a recommendation.
View detail
Firmly.
I could not tell how light the Clutch was, but the build quality was solid, as if it were an OEM product.
Durability, that is the most decisive factor.
View detail
perfectly clear
I used it with KH's FrontDisk offset.
There was no rattling when I installed it, and the dimensions were perfect! I think this will prevent the wheel from shaking.
If I had to complain, I would say that it would be perfect if a little meat was removed. The lighter the suspension, the better.
Based on that, I think it is a highly accurate product.
View detail
Fits: KAWASAKI Zapper Engine, KAWASAKI Z1000R Series Engine, KAWASAKI ZEPHYR 400
It's the kind of product that scratches an itch!
When attaching the Hose to an OEM Breather cover, there were times when the Hose would come off even though it was tightened with a Hose Band because of the taper shape of the cover. It is nice that there are two types of Hose, 12mm and 14mm. I think anyone can do the work if you pay attention to these two points. View detail
It's an itch that needs to be tended to
The battery case had been changed to Other Brand Product, and the battery case was like a wall near the opening of the funnel of Long Specification. So we shortened the length of the Spigot.
Originally, a fairly long Spigot from JB-POWEROEM was used, so it has shrunk by less than 20mm.
The difference between the Spigot and the Indicator has been eliminated? Or maybe it is because the sudden jerking that occurred during idling has also been resolved. I am not sure if everyone can feel this effect...
I got a mental reassurance that serviceability has improved by a LARGE margin and that the efficiency of intake efficiency has probably improved as well.
PinGel's Cook was used, but the Carburetor has moved forward, and the positional relationship has become slightly inadequate for ON, so the mounting angle has been changed slightly.
Installation is not difficult, but with an older Carburetor, there may be a Case that has difficulty removing and installing the existing Spigot.
View detail
Fits: KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100, KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100
Slightly Bend Meter Cable
The subtle bend was just right. View detail
I don't know...
It was thinner than the original. It looks fine, but I'm a little worried. View detail
Fits: KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100, KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100
It worked for 750turbo.
As per the Title, but maybe the Meter gear is for GPZ900R.
(I think all the front legs and wheels have been converted to GPZ900R.)
With this background, I bought the Ichi or Drumstick, and I am happy to say that it came on properly.
It is a slightly bent Type, but it is just right to dodge the retrofitted Brembo caliper.
View detail
Low FrictionWire for Z 115mm
I had been using Stainless Steel Wire and couldn't tell the difference between it and this product. View detail
Bolt On is not available for some vehicles.
Bolt On cannot be installed on some Z1000J.
Spring hooks must be welded to the body side.
Once you remove the Side Stand, check to see if there is a Hook at the top of the Side Stand mounting hole.
Our Z1000J does not have a spring hook and could not be installed.
If it can be installed, I think it is a good Parts.
View detail
For anti-embrittlement of Course driving
I installed this to ease the emblem when driving Course. We tried KTM's OEM product, but the bore diameter is too small and the resistance is too large, so we decided to install this product to reduce the flow of blowby gas.
Downshift without blip pinging on the side and it became Large sturdy!
View detail
Fits: KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100, KAWASAKI Z1000 R, KAWASAKI Z1000 MK2 last model, KAWASAKI GPz750, KAWASAKI GPZ1100
Looks great! The rest depends on longevity.
Happy with Refreshing installation.
Actually, I think I'd prefer something that's Offset by Meter gear.
Since he could not find it, he let it go on Wire.
The item has a slight clearance (bent) near the meter cable attachment point.
The Brake Caliper was successfully crossed and installed on the SMART.
This is a minor change, but the accumulation of these details will turn into a masscene to be proud of! (^_-) -★
View detail
The snatched and old Key cylinder part becomes Beauty easily.
While looking for other parts, I found this Seal.
The fitment is for GPZ900R and my Motorcycle is not the fitment, but I bought it because it is not so expensive.
The size and position of the letters match Exactly, and the work was easy because I just put it on the top.
I gave it 3 stars because I'm not sure how durable it is yet.
View detail
Satisfied with product workmanship and installation fit
It is for KZ1000MK? but I was able to install it on my KZ900 without any problem after checking with SpeedShopIto. I am satisfied with the quality. But it would be better to have the ball point (Long) of Hexagonal Wrench for installation. View detail
For vehicle inspection
I bought it for the car inspection, and it passed the User car inspection in one shot. View detail
Bolt did not fit and could not be installed the same day.
I checked before installation, but could not install because one Bolt did not fit.
I'm going to go to Home center now.
I'm very disappointed because it was an expensive product.
I want you to inspect it properly.
View detail
Fits: KAWASAKI GPz750, KAWASAKI GPz750turbo, KAWASAKI GPz750, KAWASAKI GPz750turbo
Saviour of out-of-print cars
I'm so impressed with SpeedShopIto's prompt, friendly and courteous service!
We hope to have the opportunity to work with you again.
View detail
Fits: KAWASAKI GPz750, KAWASAKI GPz750turbo, KAWASAKI GPz750, KAWASAKI GPz750turbo
Saviour of out-of-print cars
Thank you, SpeedShopIto, for your quick, kind, and courteous response! View detail
Fits: KAWASAKI GPz750, KAWASAKI GPz750turbo, KAWASAKI GPz750, KAWASAKI GPz750turbo
If you see this, please contact me ASAP!
Quantity of goods:There are parts missing from the Set!
And there's no applicable field for email correspondence either!
I've been trying to call him for over 10 minutes and he won't pick up!
There's no way to contact him!
If you see this, please contact me ASAP!
View detail
Excellent bite and universalism
Frequently Asked Items
What made you decide to buy?
I was using Rear Sets made by Babyface, but I bought them because the Knurl part of the footpeg that came with the standard footpeg was getting worn off and the bite was getting worse.
The standard fine ThornThornThorn footpegs are perfect for the initial bite, but they also wear out quickly, and the surface of the Knurl footpegs for Race bar of each company was MAJOR like this product, so if you want to change anyway, the square Knurl I was looking for a Footpeg.
When I look for it, this kind of Footpeg costs around 5,000 yen for 1 pc (One Side) alone & hellip;In such a situation, this Footpeg made by SpeedShopIto which was taught by a junior colleague, I tried it this time because it was the cheapest in the design which I was seeking!
How was your experience with it?
The first time I used it in the rain, the footpegs were able to take the load without slipping. It is a sensible part, but the Knurl of GizaGiza is good for loads that are applied from above, but when the load is applied from a diagonal direction, such as in the bank, I feel that the Boots is caught between the square and the square and Firmly bites into the back of the Boots.
So far, it's performing as expected, so if there are no problems, I'll continue to use it.
Was the installation difficult?
It has the same bolt size as the Footpeg made by Babyface, so I was able to install it as it was by replacing it.
However, the Bolt that came with it was too long and seemed to interfere with the Swing Arm, so I replaced it with a shorter Bolt.
The Babyface Footpeg comes in a color, but without this color, this Footpeg will be shorter. On the other hand, if you use the collar, the footpeg will be longer. I tried both, but I used the collar as it is because I liked the feel of the longer one with the collar dovetail.
【Please tell me the installation point and hang】
It's easy if you've done your own footpeg replacement.
[Was the Instruction Manual easy to understand?
Not included.
[Included Parts:were they on?
Bolt is also included, but it is quite long.
[Others]
nothing special
View detail