Reviews
Easy to install and good to see.
It is a simple device and looks good. The bonding strength was increased by using double-sided tape to add strength. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
The finish is beautiful, but the fit is a little tight.
I installed the same one on my 6R before and it fits almost perfectly.
This time it was a little too tight.
Mirror shape is the same, so is it an individual product difference?
The tatami finish is very good.
It's too bad it cost about 2000 yen more than it should have.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Can be used for first generation GSX1300R HAYABUSA
I saw a post on Amazon that it could be used on the first generation GSX1300R HAYABUSA, so I bought it as a trial.
Installation can be done without any problems.
However, there will be a small gap in the OEM Mirror rubber cover.
With ARAI's Full face, the ? ring is Limit in the lock area, which may damage the interior, and it is a little difficult to insert the key when removing the lock.
I will also take into consideration the included WireSpec.
However, the OEMHelmet holder cannot be used with the Seat bagetc., so with this attached, I no longer have to worry about where to place the Helmet.
View detail
Fits: KAWASAKI NINJA650, KAWASAKI NINJA400, KAWASAKI ZX-6R, KAWASAKI NINJA250SL, KAWASAKI NINJA250, KAWASAKI NINJA1000
Extra Material:CarbonKey Holder is a delight!
I also bought a Ninja 250SL to hide the scratches on the Mirror part…
It's honestly insanely expensive !!!! … but the texture is good.
I am happy with the bonus Sticker and Key Holder. Other companies should take a lesson from you! LOL!
View detail
ZX-14R standard MirrorSpec.
Used on ZX-14R.
I tried to install it on Class Four EngineerRing's ZX-12R-like Mirror, but gave up because the size did not fit.
Short mirror had poor rearward visibility, so it is attached to the standard Mirror.
The size does not feel like it can cover everything, but the Level can be used without any problem.
Generally satisfied with the product.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
You might not even notice it unless you're told.
The carbon pattern was good and the precision of the parts was excellent.
It's casual, but compared to OEM, of course, it's still very different.
View detail
I hid the scars from the standing moss.
It looks good. I've been thinking it would be nice for a while, so I put it on this time to hide the damage from standing moss.
It's easy because it's fixed with Double-sided Tape, but I added more than just the included Tape because I was worried.
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
That would be handy!
The OEM Helmet holder was damaged, so I installed this one. I bought this because it said it would work with my Jacket if I used the included wire. It's easy to install! I think it's great for when you need to get away from your motorcycle for a short time. (^O^) View detail
Convenient!
I purchased this to plug the OEM Mirror hole to make it a bar end mirror.
I didn't have a reversed screw on hand, so this was very helpful.
The length is Exactly and is in Beautiful condition with no water flooding and no rust.
View detail
Ideal for Fixing Mirror's Bolt
This is not the Mirror of Napole On, but I bought it because the other company's Mirror bolt became rusty. The feature that the Washer made of plastic is attached, and Mirror can be fixed in a good feeling. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600
Perfect for scarring and mirrorDress-up
GSX-R1000 (L5) I'm on CanadaSpec
I bought it because I bought a used car and I was concerned about the scratches on the Mirror I inquired about the fitment, but I was told that I didn't know, so …I looked into it in various ways No, it'll fit! I bought it because I thought it was a good idea
I don't know what in the world this is a conforming inquiry for …
He said to do a little more research
The installation was completely flawless
There is double-sided tape inside, so peel off one by one and stick it on the surface patiently It's like
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It's simple but safe
Helmet, Wear is multiplied by Mirror, but the attached Wire is useful.
As a burglarproof we are upset if Mirror is removed
There is a sense of security for fall prevention when leaving a bit.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Easy to use
Until now I used a Wire type lock, but since it was taking out from Bag when I used it, it was good that I did not have troublesome work with this product View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It is useful for chokei
Africa Twin's OEM has to remove Seat one by one.
Cover Mirror with Helmet and lock Helium D ring and attached Wire through the collar collar together.
View detail
Not particularly dissatisfied
Full cowl purchased to relocate Mirror from car.
It is not a consumable part, so I do not mind it much, but I feel higher compared to Normal Thread Screw.
Quality is the crushed Screw mountain etc etc. There is no defect of.
Since there is the attached BlackCap, Silver's Screw will not be visible after installation.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Fixed Bolt - - - It is
GSX1300R Hayabusa 's Mirror' s Base will be tightened together and the lock body will be tightened with the attached Hexagonal Wrench, but the included hexagonal dish Bolt (Red arrow of photo) Is BlackBolt so it tends to rust.
In fact, since rust occurred in less than a month, we used Material under the same neck at Home center : Exchange with Stainless Steel dish Bolt.
I absolutely wanted to devise a little more because it attaches to the part where rain can not be prevented.
That price is slightly expensive.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Helmet Holder Mirror Clamp
GSX 1300 R HAYABUSA is troublesome if the Helmet holder has to remove the Tandem seat and fix SeatBack to the Tandem seat during Touring. Therefore, even when parking Helmet was unprotected by Mirror. This Helmet holder is attached to the root of Cowl's Mirror, it can change the direction Quantity : Pair (for Left and Right) It corresponds to both.
The installation can be easily installed with the feeling of being sandwiched while removing Mirror. The feeling I used is not bothersome even if I get away from Motorcycle a bit, such as Convenience or high speed SA.
However, depending on the type of Helmet, there are things that Sting's Ring does not reach. In that case Extended Wire Code included (1200mm) We will correspond with. By the way, ARAIRX-7 RR5 is LimitOK, GT-Air is somewhat hard. Even if it suddenly rains, since Helmet becomes Up, I think that it is good to be locked without getting wet inside.
The included Wire cord is passed through Jacket which is not taken off by Helmet, Jacket's theft suppression is also possible so it is convenient for medium to long distances such as Summer Touring.
I can use it without problems for the function. However, it looks awful, I can not deny the discomfort to Cowl. In the case of photography etc., it is removed. I think that it may be necessary to attach or detach it from time to time.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1100 Y (GU76A), SUZUKI GSX1100 R (GU76A)
OEM to PetitCustom
I examined Mirror outside the company, but I decided to change OEM from the point that it can fold and the backward visibility.
Making is fashioned OEM and there is no problem with Fit. Although it is Carbon when it sees well it is Level which is not understood at a distance.
I want to change it outside the company, but OEM is also hard to throw away - - - This is the perfect product for people.
Neck is expensive, is not it.
View detail
It is Exactly
I was thinking of Mirror's Custom from a long time ago but I could not step on the price, but this was cheap and I purchased it.
Car is the procedure to paste IndiaFilm.
It was Just fit more than I thought.
View detail