Reviews
Screw goes missing.
It is used with Pillion Bar.
Quality as a Holder is perfect!
It is well made and highly satisfactory.
However, the screws for adjusting the Large size may be prone to falling off.
If you don't squeeze it properly and drive with it loose, it will fall off before you know it.
Once it is lost, it is even more likely to fall off with other nut, etc. Therefore, it may be necessary to first apply Screw lock to the tip of the Bolt to prevent it from falling off.
View detail
Fits: BMW S1000RR, KAWASAKI NINJA H2SX , KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX SE+
Mount bar with a large range of motion
[How is it used?
USB charging, for mobile Holder installation
Was the one you received as per Image?
Exactly the same as the photo shown
Was the installation difficult?
The installation itself is not difficult, assuming that there is a hole in the CenterPost of the Top Bridge.
Also note the hole diameter.
By tightening the screw, the Ring expands in the CenterPost and is fixed in place.
It tries to move somewhat even when it is fully tightened. This is unfortunate. However, it is a playful part like BacCrash.
Screw Lock (medium strength) must be used for the screw part.
How was your experience with it?
Very stable and very easy to use due to the wide range of motion.
No vibration, etc. is produced.
Pipe thickness is also common, making it highly Universal.
It depends on what you are going to install, if you are going to install a portable Holder, USB power supply,
I think 100mm is too short.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
CenterPost holes are not well fixed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Drink holder
I am very satisfied with the way it is made.
It is very good because it can be easily adjusted according to the Drink Size.
View detail
A little expensive, but satisfactory
[How is it used?
Purchased Quadlock Mount to work with Scooter.
Mount, QuadlockMount, and iPhone XS Max on my commute to work.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It is very easy to use, just put it on the Mirror mount.
How was your experience with it?
Mount is thick enough and strong enough.
Satisfied with the freedom to change angles.
The phone doesn't shake at all.
Black Anodized has been in use for 3 months and has not faded (maybe with lighter colors?).
[Included Parts:were they on?
All parts for installation are included.
[Was there anything that disappointed you?
None in particular
View detail
Speedra Drink holder
Installation was easy and I was satisfied with both the design and the quality. View detail
Adjustments.
The mounting height can be changed, allowing for adjustment to a user-friendly position.
The width can be easily adjusted with the screw on the bottom to fit plastic bottles and water bottles, so there is no wobble when running.
Aluminum and luxury.
View detail
Easy installation
It is easy to install and strong enough.
The color is a little lighter than Kawasaki green, but
OK because it's cosy!
View detail
For Navigation installation
I bought this for Navigation installation. I used PartsRemover for Plastic model. View detail
Mounted on PCX160
I installed it on my PCX160.
I bought this because I was missing One Side with the Handlebar Brace installed and the Smartphone Holder.
The texture is pearl and I like the simple design.
You can adjust the width of the bottle with the knob on the bottom side, so you can make it fit your plastic bottle just right.
I recommend it because it is very reasonably priced.
View detail
It's not bad!
No problems and useful.
If I had to make a complaint, it's a matter of personal preference, but the paint job is a bit cheap.
It's a shame that the pictures of the product didn't show it clearly.
I would have given it a 5 if it had a texture like the Aluminum Cut-Out.
View detail
No complaints
I think that it is a complaint-free product. I think that it is functional and well considered product. It is a fine part, but the craftsman's wisdom, the technique was very nice and good product.
View detail
There is no worry of falling
There is no worry of cracking like resin with Aluminum Material.
Although it is not difficult with regard to installation, even if you tighten Bolt considerably with Spacer rubber in it, Firmly is not fixed and I used Double-sided Tape.
Since rotation is done only up to about 45 °, it is impossible to change the length and breadth.
There is no worry that smartphones will fall when using OutCamera can be used Charge Cable can also be used normally.
The price is high ...
It might be a reasonable price though thinking of breaking resinous and replacing it, but it is expensive.
View detail