Reviews
Fits: HONDA CB750F(RC04), HONDA CB750F(RC04)
Anyone can install it securely.
KATANASwing ArmConversion is easy. View detail
Fits: HONDA CB750F(RC04), HONDA CB750F(RC04)
pimping
KATANA's Swing Arm has been converted. Easy to install! The chain line is also large and looks strong. View detail
Fits: HONDA CB750 FA (RC04), HONDA CB900 FZ (SC01), HONDA CB750 FZ (RC04)
For brembo installation
Brembo caliper, SUNSTAR 320mm, radipon to strengthen the Brake! View detail
Fits: HONDA CB900 F (SC09), HONDA CB900 F (SC01), HONDA CB750 F (RC04)
Used for CB750FB
It was very helpful because I didn't have to take out the measurements and make it myself.
The price is good and affordable.
View detail
Fits: HONDA CB750 FA (RC04), HONDA CB900 FZ (SC01), HONDA CB750 FZ (RC04)
Caliper support by METALGEARWorks
I am very satisfied with the high quality. View detail
This is my third purchase!
This is the third time I have purchased this product, and I buy it every time I change my motorbike.
This one completes the Tank (Hose) within easy reach...combined with Active's KaEraserd, it's pretty darn smart…!
Naturally, the Fluid capacity will decrease due to the loss of Tank, and since the air passage is gone, the Fluid movement may not follow the Pad's decrease. When I notice this, I remove the lid and adjust the air pressure. (It is slightly pressurized when the lid is pushed in, so maybe it is a matter of feeling?)
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC08), HONDA CB900 F ALL MODEL (SC09), HONDA CB1100 R (SC05), HONDA CB750 F (RC04), HONDA CB900 F ALL MODEL (SC01)
A high quality product by MGW
I bought and installed this part for my CB900F and it has worked flawlessly for a couple of years now. Along with this product I bought and installed an Yoshimura throttle body and they fit together nicely. View detail
Fits: HONDA CB1100 F (SC11), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F (RC04), HONDA CB1100 R (SC08), HONDA CB1100 R (SC05), HONDA CB900 F ALL MODEL (SC09)
A very nice product by MGW
I swapped the original switches to MGW switches on both sides and I've been very happy with the way they've performed. The hazard function is a nice addition also. An easy part to install as well. View detail
Fits: HONDA CB750 FB (RC04), HONDA CB750 FA (RC04), HONDA CB750 FZ (RC04)
Just use chic.
Easy to install
It looks good ^^^.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
For Wiring
I bought this for the terminals of Wiring.
The cover, the color, is thin, but it is attached, and it is easy to distinguish and can be used in a good way. Package is also decent for the price. It would be nice if there were other Cover colors, too.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
For Wiring
I bought this for the terminals of Wiring.
The cover, the color, is thin, but it is attached, and it is easy to distinguish and can be used in a good way. Package is also decent for the price. It would be nice if there were other Cover colors, too.
View detail
Fits: HONDA CB1100 RB (SC08), HONDA CB1100 RB (SC05), HONDA CB1100 RC (SC08), HONDA CB1100 RC (SC05), HONDA CB900 F ALL MODEL (SC09), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F (RC04)
CB900F SC01 Hydraulic Clutch?
brembo Radipon Clutch master and Quantity:I replaced it with Set. The total cost is about 120,000 yen.
It is slightly lighter than the Wire type.
The working pressure is linear and the pressure is constant.
Clutch hoseetc. is also required separately.
It looks cool like a Spenser replica of AMASUPER BIKE?
View detail
Fits: HONDA CB900 F ALL MODEL (SC09), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F ALL MODEL (RC04), HONDA CB1100 R ALL MODEL (SC08), HONDA CB1100 R ALL MODEL (SC05), HONDA CB1100 F ALL MODEL (SC11)
It's a good look
The build quality is good and clean. It does not improve the performance, but it contributes to the appearance and tune. The installation itself is easy to install. View detail
Fits: HONDA CB1100 RB ALL MODEL (SC05), HONDA CB900 F ALL MODEL (SC01), HONDA CB1100 RB ALL MODEL (SC08), HONDA CB1100 RC ALL MODEL (SC05), HONDA CB750 F ALL MODEL (RC04), HONDA CB1100 RC ALL MODEL (SC08), HONDA CB900 F ALL MODEL (SC09)
Good!
I replaced the Clutch with this one because the sharpness of the Clutch was getting worse. The product itself is well made and beautiful. I have no problem with the installation. The clutches were very sharp and the problem has been solved. The price is high, but I recommend it. View detail
Fits: HONDA CB900 F ALL MODEL (SC09), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F (RC04), HONDA CB1100 R (SC08), HONDA CB1100 R (SC05), HONDA CB1100 F (SC11)
No problem
It is a total cutting and ponting with good accuracy. View detail
Fits: HONDA CB1100 R ALL MODEL (SC08), HONDA CB1100 R ALL MODEL (SC05), HONDA CB900 F ALL MODEL (SC09), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F ALL MODEL (RC04), HONDA CB1100 F ALL MODEL (SC11)
Satisfactory quality and dress-up effect as a complementary OEM component
Crack has entered the brazing part of the NORMAL Oil pipe, and the Main I bought it for repair purposes
The replacement can be done in cold weather after the Engine is stopped, and if enough time is allowed, the NORMAL Oil will not leak when removing the pipe
For installation, the Hose and Banjo sections are shipped pre-assembled at the correct angle So it's not particularly difficult to do
However, when you loosen the Oil Bolt, it is better not to tighten it with the prescribed torque suddenly Good
The NORMAL is built with a wider seat surface for the Washer and PipeBody, but this product If you tighten the seat with the prescribed torque, the seat on the engine side will be The surface will cave in and may cause oil to leak If you tighten it slowly and carefully, you can get a large amount of oil without worrying about the prescribed torque It was strong
After installation, I used the Chassis dynamo and other devices to run at full throttle and applied high oil pressure, but it was not a good idea No oil leaks, etc., and the quality is satisfactory as a complementary OEM part
The good thing is that Plus alpha has a dress-up effect, and it's casual around the Engine It gave me a custom feel
There is nothing bad about it, but the handling instruction manual is a bit concise, so I'm not sure what to expect It's for people who have some experience in tinkering with machines
It has satisfactory quality and performance as a complementary part for Dress-upUp and OEM, and can be used for other companies' products as well It is a good product as there is nothing similar
It's not so good in terms of cost performance, but it's not so good in terms of OEM I don't think it's particularly expensive when compared to Parts
We recommend it for a wide range of CB-F series restorers and customs
View detail
Fits: HONDA CB1100 R (SC05), HONDA CB1100 F (SC11), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F (RC04), HONDA CB1100 R (SC08), HONDA CB900 F ALL MODEL (SC09)
It is an indispensable Items for Push cancellation
【What made you decide the purchase?】
In exchange of Switch box for Pink cancellation and Hazardization of Blinker, it was necessary to relocate Chalk and we bought the same type Parts for 7F because there was no other Parts.
【How was it actually used?】
It is easy to use because you can hold it at an arbitrary position
【Was it difficult to install? (Hard parts case)】
Because we need to remove Seat and Tank, we need a proper tool and maintenance Kill.
[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that it is inevitable because the number of production is small, I think that it will be a little cheaper.
【Have you compared items?】
Other similar products were not found.
View detail
Fits: HONDA CB1100 R (SC08), HONDA CB1100 R (SC05), HONDA CB1100 F (SC11), HONDA CB750 F (RC04), HONDA CB900 F ALL MODEL (SC01), HONDA CB900 F ALL MODEL (SC09)
very respectable aloy processes. a very nice one share with good function.You can use with or without Tacho connection
very respectable aloy processes. a very nice one share with good function.You can use with or without Tacho connection View detail
Fits: HONDA CB900 F (SC09), HONDA CB900 F (SC01), HONDA CB750 F (RC04)
CB 750 F FC with KATANA
82 years FC
I bought it to install the Swingarm of GSX 750 KATANA.
I was able to install without problems because the accuracy is Well.
I think that there is no problem for strength because of Plating processing on Steel.
ColorQuantity : Pair (for Left and Right) Just put the Chain to 108 LINK and cut the suspension a little bit and complete the diversion of KATANA's Aluminum Swingarm.
View detail
Fits: HONDA CB1100 RB (SC08), HONDA CB1100 RB (SC05), HONDA CB1100 RC (SC08), HONDA CB1100 RC (SC05), HONDA CB900 F ALL MODEL (SC09), HONDA CB900 F ALL MODEL (SC01), HONDA CB750 F (RC04)
I was really impressed with the finish of the Hydraulic Clutch Kit from Metal Gear Works. I bought the Silver alloy version as I am building a Honda CB1100RB replica and wanted the Silver finish for my Engine. The cover fits perfectly and the supplied g
I was really impressed with the finish of the Hydraulic Clutch Kit from Metal Gear Works. I bought the Silver alloy version as I am building a Honda CB1100RB replica and wanted the Silver finish for my Engine. The cover fits perfectly and the supplied gasket was more than adequate for the restoration. The styling of the new clutch cover adds a new modern feel to the engine and of course not having to worry about a clutch cable snapping is now a thing of the past. View detail