Reviews
Fits: HONDA VFR800F, HONDA VFR800X, HONDA CBR600RR, HONDA CBR1000RR
Satisfied with cost-effectiveness as For RacingPad
I installed it on Circuit Running's CBR600RR (PC40 2011).
Speaking of brembo's racing pads, Z04, Z03 for endurance, and Z10 recently released are the standard, but they are expensive...
I chose the far cheaper RacingCompound (RC) since it is not used for Solidly's Race.
Before the replacement, it was a replacement from HRC (Honda's RaceParts) N615.
This was not a complaint, but the Quantity:30,000 yen for 1 Set for 1 Vehicle...
The bremboZ03 is a Quantity:40,000 yen for 1 Set for 1 Vehicle....
I was a bit worried about the price of the racing pad, which is less than half of the price of the racing pad, but brembo claims it is "for Race", so I was a bit nervous and had mixed expectations.
bremboRC is a CarbonCeramic system, which means it is not sintered.
Some people think that it has to be Sintered, but in conclusion, there was no problem.
Since the pad brand was changed, the disc surface was peeled with steel wool (Bonnstar) at the time of replacement.
Of course, when we replaced the pad, we also cleaned the Piston and replaced the DOT 5.1 Fluid. We finished it perfectly.
Here are my personal impressions after using it at Sports LandSUGO.
Control is good from the beginning to the back.
The μ at low temperatures is not extremely low, and there is no need to be conscious of heating to raise the temperature.
Even when the temperature rises, there is little change to BrakeTouch, which is a good impression (although it is also a new pad).
Low thermal strain, good strength of back plate
The surface of the disc becomes black due to the effect of heat and the carbon film.
The braking force of △ Full Brake is milder (less potent) than HRC/N615, and it would be easier if it bites a little more.
The amount of Dust powder on the Wheel is small, so it is expected to be more Life than HRC N615.
So I feel a slight difference in efficacy compared to the high price FOR RacePad, but it is a much higher dimension than OEM, and from the Balance of price and Brand reliability, I am glad I bought it.
Since the BrakeCost per pc driven drops to about half the cost, I can add that floating budget to the Tire cost.
View detail
Fits: SUZUKI GF250, SUZUKI GSX-R1100, SUZUKI GSX250 SP, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSX400R, SUZUKI GSX400X Impulse, SUZUKI GSX750R, SUZUKI GSX750RR, SUZUKI RG400 γ, SUZUKI RG500γ, SUZUKI VS1400INTRUDER, SUZUKI VS1400INTRUDER, SUZUKI VS750INTRUDER, SUZUKI VS800INTRUDER, SUZUKI INTRUDER400, SUZUKI INTRUDER LC, SUZUKI INTRUDER LC, SUZUKI DESPELADO800
Sintered and Pad as OEM
The OEM pad for RG400/500Γ is out of stock and we are looking for a Sintered pad similar to the OEM one. The Sintered Pad is considered to be valuable because there are almost no Sintered Pad made by other companies. View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Used for MT-25 for Rear
[How is it used?
I replaced the Brake Pads on my MT-25, which I use for commuting and touring, because they were running low on remaining capacity before I knew it.
Although DAYTONA's Red Pad is the iron plate as an external pad, I was curious what brembo's CCCompound was like, so I purchased it.
Was the one you received as per Image?
It was just like the picture.
They are the same shape as the probably OEM Brake Pads that came with the vehicle when it was purchased, and naturally had no problem installing them.
Was the installation difficult?
If you have some maintenance skills, it is easy because all you have to do is remove the rear tire and replace the pad.
The Pad pin of MT-25 is just a pin that prevents it from falling out, so there is no need to worry about Bolt sticking.
Although no particular chamfering was performed, the braking power was sufficient from the start.
How was your experience with it?
The CCCompound is designed for city driving, so it is more mild than the previous pad.
The more the Rear locked up until then, the more it stays rotated without locking up when Brake is stepped on.
Although it is not capable of a heavy brake, it seems to be mild enough for normal driving in town.
I drove on a rainy day, but I did feel that the braking power itself was almost the same even with Large rain.
I have driven about a hundred kilometers since the replacement and there is already a little Brake dust.
This means that it is decreasing, so I think Life is not that long.
Brake Discs seem to be less aggressive, so it may be possible to improve the life of the Disc Side.
[Included Parts:were they on?
Brake Pads only.
Don't forget to Grease as well, as Caliper will also need to be maintained when the pad is removed.
[Was there anything that disappointed you?
It is not a disappointment, but I noticed after installation that the pad is quite conspicuous because of its blue color.
This is even more so with the MT-25, which has almost only Black around the rear.
【Review】
This pad is for street use, even in the rain.
It is not suitable for hard breaking, but it may be sufficient for 250cc for rear.
View detail
Fits: HONDA CBR1100XXBlack Bird, HONDA CBR1100XXBlack Bird, HONDA ST1100A Pan-European, HONDA ST1100A Pan-European, HONDA ST1300 Pan-European, HONDA VFR800, HONDA VFR800, HONDA VFR800ABS, HONDA VFR800ABS, HONDA VFR, HONDA VFR, HONDA VTX1800, HONDA VTX1800, HONDA VTX1800C, HONDA VTX1800C, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800S, HONDA VTX1800S, HONDA X11
Great Control
There were few options for Pad for Pin slide caliper for my Motorcycle, only Resin pad.
Since brembo has lineuped Sintered pad, I bought it without hesitation.
After the replacement, the new wheel is acclimated quickly, and both control and braking power are dramatically improved.
I was surprised to see how much difference just a pad can make.
I don't know about the durability yet, but I am satisfied with Large when I experience such high performance.
View detail
Fits: SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSX-R1100, SUZUKI GSX-R400R SP-II, SUZUKI GSX-R400R-SP, SUZUKI GSX-R750, SUZUKI GSX-R750R, SUZUKI GSX-R750W, SUZUKI GSXR400R, SUZUKI RF900R, SUZUKI RF900R, YAMAHA FZR750R, Others , Others
Genuine Brembo Sintered Front Brake Pads for Suzuki RF900R 1997
This old girl was in need of a new front and rear pad change and the customer decided they wanted to give the Brembo Sintered SA a go to see if they suited. Finding the right pad set for this bike was not as hard as I thought it would be with it being so old. Brembo did have a couple of different compounds available for this but I though the racing ones were a bit overboard. Anyway, after checking Brembo website for fitments I then found these on Webike at a great overall price for the front and rear. I used EMS fast service and the order was delivered to my door within a week. All items in the order were packaged really well and any spaces in the outer box was filled out with extra padding. The pads came in their own packet which was sealed. The pads are just awesome. These will make you stop far better than some other brands in the same price range. The pads are well made and the sintered part shows no sign of degredation like some brands even when new. Just buy them and don't worry, you will stop. Thank for the great service Webike. Fantastic View detail
Fits: YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper, YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper
Control outstanding!
The initial effect is a little strong and the controllability after gripping is great, but the wear is not so great, View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I have received the product but it is in Stock condition. I will add a review after I use it. brembo will be Large sturdy! I'm hoping it looks the same as the SBS, View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I haven't used it yet Stock I'll review it when I do. View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I have not used it yet. I bought it for Stock. I bought brembo's Sintered, but it looks the same as SBS's Sintered. If it runs out after 3000 km, it will be the same. View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
Not used yet Purchased for Stock View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
I understand it can handle up to sports driving...
Due to late delivery of my regular Pad.
The selection caught my eye because of how brembo's SACompound.
The product had a Level look and feel, which frankly is not good.
I thought at the time that it was okay because Red looks great when mounted on Caliper.
After the Circuit run, I looked at Caliper and saw that the Red, which had been so prominent, was missing.
I disassembled it and checked it and found that the painted parts were burnt and blackened after an hour's run.
The place used is Motegi, but this is with the body acclimated and not used harshly.
As for the appearance, a little Hard driving is a disappointment.
The performance of the Brake is in line with the price, the durability is not that great, and the cost performance is not so good.
I don't think there will be any problem if you are touring normally, but I don't think I will choose brembo pads in the future.
View detail
Fits: KAWASAKI Z800, SUZUKI SV650 S, SUZUKI SV650, SUZUKI GLADIUS650400ABS, SUZUKI SV650, SUZUKI SV650X, SUZUKI SV650 S, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSR250S, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI DL250 V-STROM250, SUZUKI DL250 V-STROM250, KAWASAKI Z900, KAWASAKI Z900, HONDA X-ADV
Genuine Brembo Front Pads for Kawasaki Z900
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I would try the sintered ones first. Finding the correct part was pretty easy as I visited Brembo website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own Brembo branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are heavily sintered and also have a fairly high heat resistance. Haviong used brembo pads many times before, the fiting is really straight forward and it takes little time to get these bedding in correctly. Very pleased and the bike will be stopping on a penny from now on. View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
Genuine Brembo Front Brake Pads for Kawasaki Z1000
These were a direct replacement for the OEM front brake pads on the Z1000. The customer wanted to try a different brand as opposed to the OEM ones for a change. They said their initial bite on the stock ones was not great. Not matter, Brembo do great replacements for stock bike calipers and this was also an excellent alternative. Fid=nding the right set of pads was straight forward and referenced from Brembo's own website. The price was foar better than could be sourced from the local Brembo stockist. Nice one. With some other parts I needed I had them all shipped using EMS and the order arrived in 5 days from being shipped out. ALl very well packaged and even though these do come in the standard Brembo brake pad pack, they were still wrapped in bubble wrap by Webike. The pads are a really good quality compound, really meaty sinter in them which is what most sportsbikes need. I have personally had good experience from the SA compound of the Brembo's and rate them very highly. The customer seemed happy and that in turn makes me happy. Thank you Webike. View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000 F, SUZUKI GSX-S1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, KAWASAKI ZX-14R, KAWASAKI ZX-10RR, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S1000, DUCATI 848EVO, DUCATI 1198, DUCATI 1198 SP, DUCATI 1198 S, DUCATI 1198 R, DUCATI 1098, DUCATI 1098 S, DUCATI 1098 S TRICOLORE
price-performance
The effectiveness is only slightly better than For Street, and the durability is not good.
5Quantity in 1Season:Set consumed.
I was attracted by the price and tried it, but as a result, it was not cosmetic considering the frequency of replacement and maintenance.
View detail
Fits: ROYAL ENFIELD , ROYAL ENFIELD , KTM 660LC4, KTM 300EXC, KTM 250EXC, TM 4T, YAMAHA XT660Z Tenere, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, GASGAS WILD HP, HONDA SLR650 VIGOR, GASGAS WILD HP, GASGAS WILD HP, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350
Keep a spare supply of consumables so they can be changed at any time.
Purchased for TC125. Brake Pads are available from other Manufacturers such as RK, Vesla, ZETA, etc., but I chose OEM because the price is almost the same at the fixed price Base.
The fee ring is the same as the one currently attached (I think), so the fee ring should remain the same.
Since this is not a vehicle that I ride frequently, it is important for me that this fee ring remains the same.
If the fee ring is changed, the riding will become awkward.
I have a stock of these Brake Pads so that I can use the consumables whenever I need them, just as I do with Levers.
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250X, TM MX250, TM MX300, TM FT450 FI, TM MX125, TM F530, TM F530 ENDURO, TM F250, TM F250 ENDURO
I was curious because there are so few external Pad's.
While there are only a few manufacturers offering Brake Pads for the YZ125 since the 22nd model year,
I bought it to try it out because it was set up to fit brembo.
Compound is the most powerful of the three types. SX] I chose Compound.
NORMAL Brake Pads are Quantity:Compound of 1 pc. one, but brembo made one had a slit in the center.
Also, the Caliper and back plate shades were nearly identical.
Since it is for off-road use, we did not take out the BALI at all and assembled it as it is.
As for the experience of efficacy, it certainly seems to work better from the beginning than NORMAL.
However, it was not as if it suddenly worked at full power, but rather it was as if it worked in Plus to NORMAL throughout the entire area.
I haven't had a chance to ride with Muddy's Condition yet, but I thought it might feel too effective in that case,
If you run Course as a hobby and use it for occasional grass races, I don't think it will be a problem since you basically don't run on rainy days.
View detail
Fits: KAWASAKI Z800, KAWASAKI Z900, SUZUKI GSX-S750
Brake Pads with good Control
[How is it used?
I use it about 80% for commuting and 20% for touring, so it is a little tiring to ride it with a lot of force... So I don't need the braking power of Carbon metal, but I want it to be more effective than Resin.
But the effect is Sporty. I was looking for Brake Pads that are overall Control oriented.
How was your experience with it?
The initial braking is smooth and the braking force increases as the pad temperature rises.
To put it simply, it works not with a gusto, but with a gwoosh. In any case, the way it works is like a linear effect.
It seems to work gradually in accordance with the pad temperature, so I think it is the easiest to handle by far for this type of sports pad.
However, if this were a higher speed environment (such as Circuit) or a heavier vehicle, a pad with this controllable character might not be enough.
If you are looking for absolute braking power, you should choose RacePad, which is already on the top ranking.
We felt that this pad was sufficient for a city rider who rides his Motorcycle in sunny or rainy, hot or cold weather.
View detail
Fits: BMW F 650 GS, YAMAHA XT660Z Tenere, KTM 660LC4, BMW S1000R, HUSABERG FC550, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, HONDA SLR650 VIGOR, HONDA NX650DOMINATOR, HONDA FX650VIGOR, HONDA CB S, HONDA CB, GASGAS MC, GASGAS EC300, GASGAS EC250, GASGAS EC200
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
Fits: KAWASAKI VULCAN1500 CLASSICTourerFi, KAWASAKI VULCAN1500VULCAN Mean Streak 1600, KAWASAKI VULCAN1500DRIFTER, KAWASAKI VULCAN1500 CLASSICTourer, KAWASAKI VULCAN1500 CLASSICTourerFi, KAWASAKI ZEPHYR400 χ, KAWASAKI VULCAN1500 CLASSICFi, KAWASAKI BALIUSII, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZRX400II, KAWASAKI ESTRELLA, KAWASAKI ZR-7S, KAWASAKI ZRX400, KAWASAKI ZR-7, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI W800 STREET, KAWASAKI W800, KAWASAKI Z750
It is a Pad with good braking power and Control.
The GSR750's front brake is often said to be poor (double disk with 2 pods pushed on one side), and I myself was hoping for a little more braking power. Therefore, we installed brembo's
Brake Pads (RAD) SA] (Compound).
Feeling of use
First, the thickness of the back plate and friction material is almost the same.
Impression after the installation and break-in run, the touch is a little harder. It is not a type that works hard at the beginning, but the overall braking force is 1.5 times stronger (sensory value)! If you want a strong braking force from the beginning of the grip, it may not be enough.
Also, even in the middle of winter, the braking force is sufficient, so it is safe to start driving. However, since we have not yet driven in the rain, we are concerned about the braking force in the rain, and we do not want it to be too effective, but the gap with the sunny day may be too Large, It doesn't work the moment you grip it, but the moment you keep gripping it and finish draining the Rotor, it suddenly starts working." I am also afraid of Pad like that, so I am curious.
■ Durability
I don't know about durability yet, but the amount of dust generated is comparable to OEM, and since it is a Sintered MetalMaterial, I expect it to last as long as an OEM pad and a large pad.
General Comment
Braking power has definitely increased. First of all, I am satisfied at this point. As for the braking power in the rain, I will update the Impression when I experience driving in the rain again.
View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZZR600, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI Z750S, KAWASAKI ZRX400, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI Z1000
Initial braking is gentle
Pad of Compound for Rear.
The initial braking is gentle and only works as much as you step on it, and it seems to take a little longer to get a bite compared to other manufacturers (Vesra, RK).
Brake dust is heavy, and there is a fair amount of coppery powder.
The paint is thick, so there was some snagging during assembly (I think this may be an individual difference).
To be honest, FOR JAPAN MODELMANUFACTURER is more beautiful in the details of BALI drop, surface finishing, etc.
The car has been used for about 4000 km, but the red paint has been burnt and is turning brown,
The paint was peeling at the contact points with the caliper and piston, and the back plate was worn.
Is the Plate softer than other manufacturers?
Compound wear is normal for Sintered.
I wish the coating had more heat resistance.
View detail