Reviews
Fits: SUZUKI GF250, SUZUKI GSX-R1100, SUZUKI GSX250 SP, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSX400R, SUZUKI GSX400X Impulse, SUZUKI GSX750R, SUZUKI GSX750RR, SUZUKI RG400 γ, SUZUKI RG500γ, SUZUKI VS1400INTRUDER, SUZUKI VS1400INTRUDER, SUZUKI VS750INTRUDER, SUZUKI VS800INTRUDER, SUZUKI INTRUDER400, SUZUKI INTRUDER LC, SUZUKI INTRUDER LC, SUZUKI DESPELADO800
Sintered and Pad as OEM
The OEM pad for RG400/500Γ is out of stock and we are looking for a Sintered pad similar to the OEM one. The Sintered Pad is considered to be valuable because there are almost no Sintered Pad made by other companies. View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Used for MT-25 for Rear
[How is it used?
I replaced the Brake Pads on my MT-25, which I use for commuting and touring, because they were running low on remaining capacity before I knew it.
Although DAYTONA's Red Pad is the iron plate as an external pad, I was curious what brembo's CCCompound was like, so I purchased it.
Was the one you received as per Image?
It was just like the picture.
They are the same shape as the probably OEM Brake Pads that came with the vehicle when it was purchased, and naturally had no problem installing them.
Was the installation difficult?
If you have some maintenance skills, it is easy because all you have to do is remove the rear tire and replace the pad.
The Pad pin of MT-25 is just a pin that prevents it from falling out, so there is no need to worry about Bolt sticking.
Although no particular chamfering was performed, the braking power was sufficient from the start.
How was your experience with it?
The CCCompound is designed for city driving, so it is more mild than the previous pad.
The more the Rear locked up until then, the more it stays rotated without locking up when Brake is stepped on.
Although it is not capable of a heavy brake, it seems to be mild enough for normal driving in town.
I drove on a rainy day, but I did feel that the braking power itself was almost the same even with Large rain.
I have driven about a hundred kilometers since the replacement and there is already a little Brake dust.
This means that it is decreasing, so I think Life is not that long.
Brake Discs seem to be less aggressive, so it may be possible to improve the life of the Disc Side.
[Included Parts:were they on?
Brake Pads only.
Don't forget to Grease as well, as Caliper will also need to be maintained when the pad is removed.
[Was there anything that disappointed you?
It is not a disappointment, but I noticed after installation that the pad is quite conspicuous because of its blue color.
This is even more so with the MT-25, which has almost only Black around the rear.
【Review】
This pad is for street use, even in the rain.
It is not suitable for hard breaking, but it may be sufficient for 250cc for rear.
View detail
Fits: YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper, YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper
Control outstanding!
The initial effect is a little strong and the controllability after gripping is great, but the wear is not so great, View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I have received the product but it is in Stock condition. I will add a review after I use it. brembo will be Large sturdy! I'm hoping it looks the same as the SBS, View detail
Fits: SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI GEMMA
not yet
I haven't used it yet Stock I'll review it when I do. View detail
Fits: ROYAL ENFIELD , ROYAL ENFIELD , KTM 660LC4, KTM 300EXC, KTM 250EXC, TM 4T, YAMAHA XT660Z Tenere, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, GASGAS WILD HP, HONDA SLR650 VIGOR, GASGAS WILD HP, GASGAS WILD HP, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350
Keep a spare supply of consumables so they can be changed at any time.
Purchased for TC125. Brake Pads are available from other Manufacturers such as RK, Vesla, ZETA, etc., but I chose OEM because the price is almost the same at the fixed price Base.
The fee ring is the same as the one currently attached (I think), so the fee ring should remain the same.
Since this is not a vehicle that I ride frequently, it is important for me that this fee ring remains the same.
If the fee ring is changed, the riding will become awkward.
I have a stock of these Brake Pads so that I can use the consumables whenever I need them, just as I do with Levers.
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250X, TM MX250, TM MX300, TM FT450 FI, TM MX125, TM F530, TM F530 ENDURO, TM F250, TM F250 ENDURO
I was curious because there are so few external Pad's.
While there are only a few manufacturers offering Brake Pads for the YZ125 since the 22nd model year,
I bought it to try it out because it was set up to fit brembo.
Compound is the most powerful of the three types. SX] I chose Compound.
NORMAL Brake Pads are Quantity:Compound of 1 pc. one, but brembo made one had a slit in the center.
Also, the Caliper and back plate shades were nearly identical.
Since it is for off-road use, we did not take out the BALI at all and assembled it as it is.
As for the experience of efficacy, it certainly seems to work better from the beginning than NORMAL.
However, it was not as if it suddenly worked at full power, but rather it was as if it worked in Plus to NORMAL throughout the entire area.
I haven't had a chance to ride with Muddy's Condition yet, but I thought it might feel too effective in that case,
If you run Course as a hobby and use it for occasional grass races, I don't think it will be a problem since you basically don't run on rainy days.
View detail
Fits: KAWASAKI Z800, KAWASAKI Z900, SUZUKI GSX-S750
Brake Pads with good Control
[How is it used?
I use it about 80% for commuting and 20% for touring, so it is a little tiring to ride it with a lot of force... So I don't need the braking power of Carbon metal, but I want it to be more effective than Resin.
But the effect is Sporty. I was looking for Brake Pads that are overall Control oriented.
How was your experience with it?
The initial braking is smooth and the braking force increases as the pad temperature rises.
To put it simply, it works not with a gusto, but with a gwoosh. In any case, the way it works is like a linear effect.
It seems to work gradually in accordance with the pad temperature, so I think it is the easiest to handle by far for this type of sports pad.
However, if this were a higher speed environment (such as Circuit) or a heavier vehicle, a pad with this controllable character might not be enough.
If you are looking for absolute braking power, you should choose RacePad, which is already on the top ranking.
We felt that this pad was sufficient for a city rider who rides his Motorcycle in sunny or rainy, hot or cold weather.
View detail
Fits: KAWASAKI VULCAN1500 CLASSICTourerFi, KAWASAKI VULCAN1500VULCAN Mean Streak 1600, KAWASAKI VULCAN1500DRIFTER, KAWASAKI VULCAN1500 CLASSICTourer, KAWASAKI VULCAN1500 CLASSICTourerFi, KAWASAKI ZEPHYR400 χ, KAWASAKI VULCAN1500 CLASSICFi, KAWASAKI BALIUSII, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZRX400II, KAWASAKI ESTRELLA, KAWASAKI ZR-7S, KAWASAKI ZRX400, KAWASAKI ZR-7, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI W800 STREET, KAWASAKI W800, KAWASAKI Z750
It is a Pad with good braking power and Control.
The GSR750's front brake is often said to be poor (double disk with 2 pods pushed on one side), and I myself was hoping for a little more braking power. Therefore, we installed brembo's
Brake Pads (RAD) SA] (Compound).
Feeling of use
First, the thickness of the back plate and friction material is almost the same.
Impression after the installation and break-in run, the touch is a little harder. It is not a type that works hard at the beginning, but the overall braking force is 1.5 times stronger (sensory value)! If you want a strong braking force from the beginning of the grip, it may not be enough.
Also, even in the middle of winter, the braking force is sufficient, so it is safe to start driving. However, since we have not yet driven in the rain, we are concerned about the braking force in the rain, and we do not want it to be too effective, but the gap with the sunny day may be too Large, It doesn't work the moment you grip it, but the moment you keep gripping it and finish draining the Rotor, it suddenly starts working." I am also afraid of Pad like that, so I am curious.
■ Durability
I don't know about durability yet, but the amount of dust generated is comparable to OEM, and since it is a Sintered MetalMaterial, I expect it to last as long as an OEM pad and a large pad.
General Comment
Braking power has definitely increased. First of all, I am satisfied at this point. As for the braking power in the rain, I will update the Impression when I experience driving in the rain again.
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
OEM equivalent in both reliability and price
[How is it used?
*Evaluated after replacement and only one run for Campaign purposes (https://www.webike.net/special/campaign/brembo_serieoro/)
Only rear. use
211 km from December 30, 2023 to January 8, 2024, from urban driving to some mountain passes (National Highway 299 Hanno - Chichibu) and highways.
Brake Disc:SUNSTAR ER-033 (https://www.webike.net/sd/24143238/)
Brake fluid:ACTIVE DOT-04 Green (https://www.webike.net/sd/20443936/)
Brake hose and others:GOODRIDGE (https://www.webike.net/tab/parts/br/268/)
Was the one you received as per Image?
The product is exactly as shown in the image.
Although there is no package image, it was packaged in a Plastic package, which is often seen in Vesrah and other products.
The Red Coating-like substance was more slippery than I had imagined.
The Red part of the product is as shown in the product image, so it is natural that the Red part was claimed as shown in the Image even when it was installed in the vehicle.
Was the installation difficult?
The shape is exactly the same as the OEM, and the shim, bracket, and installation are all easy.
Red coating is applied except for the ground surface of the Brake Disc, and I feel that the silicon grease has been extended well.
Unlike Vesrah, the back surface is not textured by coating, so I thought it was easy to clean with parts cleaner.
How was your experience with it?
*Experience Brake Pads:OEM, Vesrah VD-174JL (https://www.webike.net/sd/20460287/)
We could not perceive any difference compared to OEM or Vesrah, although we believe we also got a bite during the run.
When only Rear was intentionally applied, the speed adjustment was well done, and I did not feel any discomfort.
The product is at least not problematic to use from the above and seems to have enough performance to be used quickly and easily.
I don't think any dragging has occurred.
Circuit is rarely visited, so I think it fits the usage of this product, which claims to be a general road Main.
[Included Parts:were they on?
Translation (please type here) was included with the paper Instruction Manual, which did not include any translation at all.
Even though he could not read the Instruction Manual, he assumed that the chamfering, grease, and installation were the same as OEM because the shape is the same as OEM.
[Was there anything that disappointed you?
Not for products
The product description on Webike incorrectly stated that anti-counterfeiting was included, but this product was not covered.
https://www.brembo.com/jp/company/news/brembo-app-that-checks-if-products-are-original-or-not
[Notes]
As you can see in the product image, the brake pads are bright red and the part that can be seen from Caliper when installed is also red. They may not be recommended for those who care about the color.
Price difference from OEM
The price of this product is a little higher than that of OEM Brake Pads (5,830 yen) at the time of writing (6,380 yen). However, the price will be reversed by discount and Point reduction.
While OEM parts have a different level of reliability, this is a product of a well-known manufacturer whose name is often mentioned when people talk about "brakes," even though it is in the same price range as OEM parts. Although the color may be a little different for some people and vehicles, it has the performance to be used without discomfort after pad replacement, so it is likely to be one of the top choices when replacing consumable parts.
View detail
Fits: KAWASAKI KDX125SR, KAWASAKI KDX200SR, KAWASAKI KDX220R, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KX125, KAWASAKI KX250, SUZUKI DR250R, SUZUKI DR250S, SUZUKI DR250SHE, SUZUKI RM125, SUZUKI RM250, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI TS125R, SUZUKI TS200R, SUZUKI DJEBEL250, SUZUKI DJEBEL250GPS Ver.
Not yet experienced
I think Road works better than OEM, that's all I can tell you right now, but I haven't experienced what happens when it's off. As for the Pad, it didn't squeal without the chamfer. View detail
Fits: DUCATI MONSTER1100S, DUCATI MONSTER1100S, DUCATI MONSTER1100DIESEL, DUCATI HYPERMOTARD, DUCATI HYPERMOTARD1100S, DUCATI HYPERMOTARD796, DUCATI M1200 S, DUCATI HYPERSTRADA, DUCATI 848EVO, DUCATI 848, DUCATI 800SPORT, DUCATI 749S, DUCATI 749R, DUCATI 749, DUCATI 999S AMA, DUCATI 999R, DUCATI 999R XEROX, DUCATI 999, DUCATI 899, DUCATI 899 PANIGALE
BremboOEM Product
Reliable Brembo OEM.
No complaints for Touring use.
CC Type (Blue color) I personally found this one easier to Control.
View detail
Fits: DUCATI 1098 R, DUCATI 1098 S TRICOLORE, DUCATI 1098 S, DUCATI 1098, DUCATI 1198 R, DUCATI 1198 S, DUCATI 1198 SP, DUCATI 1198, DUCATI 848EVO, DUCATI DIAVEL CARBON FL, DUCATI DIAVEL CARBON, DUCATI DIAVEL DARK, DUCATI DIAVEL FL, DUCATI DIAVEL STRADA, DUCATI DIAVEL TITANIUM, DUCATI DIAVEL, DUCATI HYPERMOTARD 1100 EVO SP CORSE EDITION, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100S, DUCATI MONSTER1100S
BremboOEM
BremboOEM Product.
I purchased a Repeat.
No complaints at all for Touring use.
View detail
Fits: Others , Others , YAMAHA XJR400RII, YAMAHA XJR400R, YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, HONDA CB400SF Ver S, DUCATI STREETFIGHTER848, DUCATI ST4S, DUCATI ST4S, DUCATI ST4, DUCATI ST3S, DUCATI ST3, DUCATI ST2, DUCATI SS900S, DUCATI SS900, DUCATI SS800
I'm going to be honest with you.
To be honest, I have not yet installed it.
Since actual use is still about six months away, I will write my impressions first.
So, the evaluation is a prediction.
We began by gathering information from various sources before making the purchase.
After all, brembo is installed as OEM, but there is no information on JapanFOR JAPAN MODEL.
I asked the Shop in Italy and received an immediate response, and then asked the Japan distributor to confirm the answer.
PLOT." The lousy reply is that there is nothing that fits in a store called
for "Koken" I received a very detailed explanation from Mr. Kato, who was so kind that I was bowled over.
According to the report, this SA has better performance than the OEM, so we decided to purchase it.
For OEM Product, the end is a number and OEMOption is AlphaBed.
Italy recommended SR's RACING, but I decided against it because it seemed to wear out too quickly.
I was informed by webike that I could get a fit, so that's how I decided to buy it.
However, my wife reported that it arrived with a sound of rattling, and when she opened the package, she found that it was just as shown in the picture.
The packaging was a little more careful than I would have liked, as the pad was placed in a box with a small shock-absorbing cushion on top.
View detail
Fits: HONDA SL230, KAWASAKI KDX220SR, KAWASAKI KLX250SR, SUZUKI 250SB, SUZUKI DR250R, SUZUKI RM-Z450, SUZUKI DJEBEL250 XC, HONDA XLR250R, KAWASAKI KX450, KAWASAKI KX450XC, KAWASAKI KX450F, KAWASAKI KX250XC, KAWASAKI KX250F, SUZUKI RMX250S, SUZUKI RMX450Z, SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI RM-Z250
Safe brembo
As expected from brembo, price, performance, security, everything is good! View detail
Fits: SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI LETS II-S, SUZUKI STREET MAGIC II, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI AVENIS150, SUZUKI AVENIS125, SUZUKI ADDRESS V50, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 SLIMITED, SUZUKI ADDRESSV125 SBasic, SUZUKI ADDRESSV125 SS, SUZUKI ADDRESSV125 S, SUZUKI ADDRESSV125 G, SUZUKI ADDRESS V100, SUZUKI Address50, SUZUKI ADDRESS110, SUZUKI ADDRESS110
NameValue of brembo
Peace of mind by Brand! The price is also very reasonable! I think it's pretty good. View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CBR125R, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA GROM, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., HONDA CB150R, HONDA CB300R
brembo is safe and secure
[How is it used?
The OEM pad for the CB125R was neither good nor bad, so we decided to go with this product to replace it with a better one.
How was your experience with it?
I feel that Brake's bosom has expanded.
I am satisfied because I can Control as much as I want it to work.
(Braking force changes with Tire, for referenceα-14Z)
[Was there anything that disappointed you?
The included Instruction Manual does not have a translation (please type here), so those who need it should be careful.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1100RS, HONDA CBR600RR, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100, HONDA Rebel1100, HONDA VFR800F, HONDA VFR800X
brembo of trust
I bought it from Circuit Running.
We also considered Endless.
Due to the high price, brembo is the first choice.
I did
I don't know how durable it is, but I've seen Brake's
The grip Touch feeling is not bad.
The interval is for reference only, as it varies from person to person.
View detail
Fits: SUZUKI RMX250 S, SUZUKI DR250SHE, SUZUKI RM125, SUZUKI RM250, SUZUKI RMX250, YAMAHA XT250X, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, KAWASAKI KDX125SR, KAWASAKI KDX200SR, KAWASAKI KDX220R, YAMAHA SEROW225 W, YAMAHA SEROW225 WE, YAMAHA DT230 LANZA, SUZUKI DR250S, KAWASAKI KDX220SR
Performance is ◎. Expect more durability in the future.
I bought a Pad for STD Caliper for SEROW250 from brembo.
Z-WHEEL's Zi-gram Rotor Rear (W51-20336) The product was installed at the same time as the
Compared to the SX, this product seems to be more focused on Control than Performance, but I am very satisfied with it because it has good Touch and also stops well in SD.
The other thing is durability, and we expect the product to be even more durable than the aforementioned Control. (It is your own responsibility if the disc is installed at the same time as a non-OEM disc, so it is incompatible with the OEM disc and decreases faster...)
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1100RS, HONDA CBR600RR, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100, HONDA Rebel1100, HONDA VFR800F, HONDA VFR800X
Attracted by bremboBrand
I bought this for a Circuit run.
I was not sure about Endless, but it was too expensive,
This time I decided to go with brembo.
Braking performance is more solid than OEM.
I would like to verify how durable it is.
I think
View detail