- Home
- Product reviews
- Motorcycle Parts
- Brakes
- Master Cylinder Tank Bracket
- To relocate Rear Master Coupling... (GALE SPEED: Tank Bracket for Rear Master Cylinder)
【GALE SPEED】Tank Bracket for Rear Master Cylinder Review
To relocate Rear Master Coupling
[How is it used?
Used to relocate the Rear master on MainMotorcycle's XJR1300C.
MASTER is changed to NORMAL and footpeg is changed to Over's Rear Sets.
Was the one you received as per Image?
It was made just like the Image. I checked the size, etc. on the Active catalog before I bought it.
Since both ends are M6, it was not expected that the one to be co-tightened with the footpeg would need to expand the hole to M8.
Was the installation difficult?
The combination of XJR1300 and Over footpeg can be easily installed if only the holes can be extended.
For the master cup, we recommend brembo's small tank with a 15-degree angled outlet.
How was your experience with it?
The OEM has the Rear Master Coupling in the Side cover, which is very poorly maintained.
I am satisfied with the new relocation, which has considerably improved the serviceability and looks very good.
Also, the side where the Master cup is installed has an M6 tap cut off so that it can be attached to the SMART without using a nut.
[Included Parts:were they on?
I think it came with an M6 Smallest Bolt, and a simple Instruction Manual.
[Was there anything that disappointed you?
If I may say so, it would be better if the Size of the Mount part is not only M6 but also M8 with normal RANup.
Many manufacturers use M8 for Rear Sets, so I think this will make it more universal.
เพื่อย้ายตำแหน่งข้อต่อหลักด้านหลัง
[มันใช้ยังไง?
ใช้เพื่อย้ายตำแหน่งต้นแบบด้านหลังบน XJR1300C ของ MainMotorcycle
MASTER เปลี่ยนเป็น NORMAL และพักเท้าเปลี่ยนเป็น Over's Rear Set
เป็นสิ่งที่คุณได้รับตามภาพหรือไม่?
มันถูกสร้างขึ้นเช่นเดียวกับภาพ ฉันตรวจสอบขนาด ฯลฯ ในแค็ตตาล็อก Active ก่อนซื้อ
เนื่องจากปลายทั้งสองข้างเป็น M6 จึงไม่คาดว่าด้านที่ขันให้แน่นร่วมกับหมุดวางเท้าจะต้องขยายรูเป็น M8
การติดตั้งยากไหม?
การรวมกันของ XJR1300 และที่วางเท้าแบบ Over สามารถติดตั้งได้อย่างง่ายดายหากสามารถขยายได้เพียงรูเท่านั้น
สำหรับมาสเตอร์คัพ เราขอแนะนำแท็งก์ขนาดเล็กของ Brembo ที่มีช่องจ่ายน้ำทำมุม 15 องศา
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
OEM มีข้อต่อหลักด้านหลังอยู่ที่ฝาครอบด้านข้าง ซึ่งได้รับการดูแลรักษาไม่ดีนัก
ฉันพอใจกับการย้ายที่ตั้งใหม่ซึ่งปรับปรุงความสามารถในการให้บริการและดูดีมาก
นอกจากนี้ ด้านข้างที่ติดตั้ง Master cup ก็มีการตัดก๊อก M6 เพื่อให้สามารถติดเข้ากับ SMART ได้โดยไม่ต้องใช้น็อต
[รวมอะไหล่:พวกมันอยู่หรือเปล่า?
ฉันคิดว่ามันมาพร้อมกับ M6 Smallest Bolt และคู่มือการใช้งานง่ายๆ
[มีอะไรทำให้คุณผิดหวังหรือเปล่า?
ถ้าฉันพูดแบบนั้น มันจะดีกว่าถ้าขนาดของส่วน Mount ไม่ใช่แค่ M6 แต่ยังรวมถึง M8 ที่มี RANup ปกติด้วย
ผู้ผลิตหลายรายใช้ M8 สำหรับชุดหลัง ดังนั้นผมคิดว่านี่จะทำให้เป็นสากลมากขึ้น
Responses
Other reviews
GALE SPEED Tank Bracket for Rear Master Cylinder
[How is it used?
Replaced at the same time when replacing with GALE SPEED's Rear brake master.
Brake fluidTank is also GALE SPEED, so there is a sense of unity.
Was the one you received as per Image?
As shown in the Image.
Was the installation difficult?
You will need an M6 450mm All Screw to install the bracket. Note that the 450mm screws sold at hardware stores do not have a screw cut at the neck.
How was your experience with it?
It looks good!
[Included Parts:were they on?
indicates negation, inexperience, unnecessariness or impossibility
View detail
Even with other company's Brake master
I used it for Tank installation of OEM's NISSINBrake master.
Since OEMTank was badly positioned and difficult to maintain, it is perfectly relocated and moved in Kore..
Processing to expand the hole was necessary but it looked better as well
View detail