【SP Tadao】POWERBOX pipe Review
It's just Pipe, but it's Pipe.
[How is it used?
Used in Touring Main.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It took some time to remove the OEM exhaust pipe, but the replacement went smoothly.
It is recommended to prepare new gaskets in advance. (Assuming that they are replaced)
How was your experience with it?
Strong assertion of the feeling of being attached. (Pipe shape and length are longer than OEM)
I don't think the sound quality will be the same in combination with YOSHIMURAExhaust System.
Better throttle at low to mid speeds (SHIFT UP connection) More fun to ride.
At high speeds, I don't think it will be any different from OEM.
[Included Parts:were they on?
InstallationInstruction Manual and Tadao Sticker only
[Was there anything that disappointed you?
Not particularly
Point and hang of installation
Be careful not to overtighten the Bolt on the Engine side, or the Flange will become limp.
When tightened at the specified Torque (23Nm), the Flange will flex. This Pipe should be about 13Nm.
Large seems to be sturdy as long as it is tightened enough not to cause exhaust leakage.
By the way, I think the Exhaust SystemConnector side is Large sturdy with 18Nm of the specified Torque.
[Availability and clarity of Instruction Manual/Notes
Please note that the installation Instruction Manual does not indicate the tightening Torque.
If an Under Cowl Engine Guard is installed, the Pipe will interfere with it, so it is necessary to check beforehand.
[ITEMS TO BUY TOGETHER
Exhaust Gasket:14181-22D01-000、Exhaust SystemConnector:14771-32E10-000、Thread compound
[Opinions and requests to Manufacturer
I wanted to include a description of the tightening Torque of this Pipe.
that's all
Responses
Other reviews
I liked it so much I bought it immediately.
I purchased the parts I needed, referring to the reviews and videos. There were cheaper stores than Webig, but I decided to buy from Webig because they answered my inquiries carefully and I had a good impression when I bought YOSHIMURA's Exhaust System last year. I was very happy that the delivery was much quicker than I had expected.
Removal and installation were easy, but an unexpected accident occurred:one of the screw threads on the bolt holder on the engine side was crushed.
The torque has been increased, and the driving has become much more enjoyable.
It was Polished Stainless Steel and it looked good once it was burnished.
View detail
Maybe it works.
[How is it used?
Touring Main.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Leave it to Shop while you repair it!
How was your experience with it?
I feel that the Motorcycle has become much more honest. I don't feel a drastic change, but I feel that the power increases smoothly with less jitteriness at low rpm. (Lol) I'm not sure if the Torque is higher than it was in NORMAL or not. But obviously the Torque is higher than in NORMAL, and the Speed goes out in a similar RPM range, so if you don't weigh yourself, you might get Large weird.
[Included Parts:were they on?
Sticker by SP Tadao, instruction manual,
[Was there anything that disappointed you?
None !!!!
View detail
Parts that can be liked or disliked
Used for 2023MODEL8BL and Exhaust System is SC.
Rucksack is now more like a parallel twin than a VTWIN.
Torque is Fee Ring aligned from Large grains to Small grains.
If you like the sloppy, sticky feeling of OEM, it might be a little hard.
And the exhaust noise is a little quieter.
It also makes a lot of noise on the front bank side.
But it is clearly Torque out from 3500~.
The speed ride is clearly faster.
Driving in the partial range is also quite easy,
Control at very low speeds is also improved.
Tadao indeed! I like it.
View detail
Proven effectiveness
This is IMPRESSION installed on a 2022, after exhaust Gas regulation MODEL.
[How is it used?
Winding driving is Main.
Was the one you received as per Image?
The weld marks in the middle of the Pipe are full of custom feeling, and it is a little longer than NORMAL, but once it is burned to brown, it does not look strange.
Was the installation difficult?
Use Torque wrench and OEM new Gasket for Engine side and Exhaust pipe assembly. Torque wrench should be used, and OEM new Gasket for Engine side and Exhaust pipe assembly should be prepared.
How was your experience with it?
The Torque above 4500 RPM is increased to a Large range, just like a lie. The Image plunges into the high RPM range at once, and it makes me want to open the Axel, because it feels so good.
○○ Embracing is more gradual, so it is easier to drive Winding.
Exhaust noise is a bit... [Color] I think it has changed to a Clear look, but I can no longer tell….
[Included Parts:were they on?
InstallationInstruction Manual and one Sticker.
[Was there anything that disappointed you?
The paint on the surface is thin and the surface has been chipped by stepping stones.
【Review】
I was skeptical that an exhaust pipe would make a difference. I was skeptical, but it did. I don't like to change the appearance of my car, so I am satisfied.
View detail
Installed on both crf250l and sv650x.
I put it on my crf250l and clearly felt the Torque up, so I put it on my sv650x.
First, the sound has changed. I think it is slightly lower and only the exhaust note is audible.
It's a nice sound. By the way, the Exhaust System is Delke Big.
Also, I'm not sure yet, but I think Torque is also going up because of the sound.
And BackTorque seems to have decreased.
I am satisfied that the sv650x was just right for me as it was too embellished for me.
View detail