【KIJIMA】Clutch Lever Review

KIJIMA

27 Nov 2012

Clutch Lever

Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R

Japan User(translated)

5/5

A Lever is damaged at the time of a fall, and since a run does not become impossible, it purchases for the purpose of carrying.
It is if attachment rehearsal was carried out and operation condition has been tried, since it is emergency. Somehow, the direction of the Lever here feels it easy-to-use, and is promotion at the leading role.
Although the difference carried out clearly is not understood, I think that texture suited itself. It is a problem pear although it seems to become somewhat thin. It thinks, after a ground comes out. Since it is
, it is very much satisfied now.

คานรับความเสียหายในขณะที่ล้ม และเนื่องจากการวิ่งนั้นเป็นไปไม่ได้ มันจึงซื้อเพื่อวัตถุประสงค์ในการบรรทุก
หากมีการฝึกซ้อมสิ่งที่แนบมาและได้ลองใช้เงื่อนไขการทำงานแล้ว เนื่องจากเป็นกรณีฉุกเฉิน ยังไงก็ตาม ทิศทางของ Lever ที่นี่ทำให้รู้สึกใช้งานง่าย และเลื่อนตำแหน่งเป็นผู้นำ
แม้ว่าจะไม่เข้าใจความแตกต่างที่แสดงออกอย่างชัดเจน แต่ฉันคิดว่าพื้นผิวนั้นเหมาะกับตัวเอง เป็นลูกแพร์ปัญหาถึงแม้จะดูผอมไปบ้าง มันคิดว่าหลังจากพื้นดินออกมา เนื่องจากเป็น
,ตอนนี้พอใจมาก.

Responses

Other reviews

KIJIMA

12 Feb 2022

Clutch Lever

Japanese Webike user

5/5

Used on Ninja 250R (As OEM compatible products)

[How is it used?
It is used on the Ninja250R
I tried to switch from ZETA's Pivot lever to the OEM Product, but the OEM Product was not at hand, so I decided to introduce this product, which is similar in shape to the OEM Product.
Currently in use by the current owner of a Ninja 250R.

Was the one you received as per Image?
As shown in the image. The shape was almost like an OEM product.
The texture of the paint was not that bad, and the quality was above the price.

Was the installation difficult?
It is not difficult to install, but if you want to make sure the work is done correctly, it is essential to allow plenty of time.
Adjust the wire until you are sure that there is enough play in the clutch lever, and remove the lever properly to avoid failure.

How was your experience with it?
Since I have small hands, I need to install a lever with an external adjustment mechanism to ensure safe operation. (If the Lever's Large size is not correct, you will be forced to use extra grip strength. This leads to hand fatigue.) All motorcycles of the past generation have been changed to short lever.
If you are a large handed person, unless you like the texture, etc., you may want to go with the OEM product for the operability.
From the above point of view, when I drove with this product installed, I felt that the clutch lever was far away and difficult to operate, but the current owner, who has large hands, is enjoying riding without any particular problems.
As far as I drove it, I felt that the feel was comparable to the OEM product.
Rather than buying a cheap lever that is compatible with an OEM Product from an unknown source on Amazon.com, etc., I recommend that you purchase this product, etc., FOR JAPAN MODELManufacturer's solid product.

I believe this product can also be used for the New Model Ninja 250 and 400Series.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
None

Point and hang of installation
Make sure to adjust the play after installation.
Grease should be applied to the part of the lever where the holder and lever rub against each other. (Lithium, Urea, Siliconetc.) Lubrication with the following will improve the operating feel.
If you don't want to use Grease because it attracts dust, use Dry Rub. (The kind that dries after application) It is recommended to use View detail