【RPM】RPM-67 Racing Full Exhaust System Review
Astringent
I installed it on my CBR400FF.
Stainless Steel Silencer is better than Aluminum Silencer.
It's a Mischief high-pitched Sound player.
Select Stainless Steel.
I've tried many exhaust systems.
After all, the standard combination RPM is the iron plate.
And you don't need a walleye when you install it.
PointIt was high.
I was able to install it without any stress.
Responses
Other reviews
RPM Suga
Installed on XJR400R (mid-term).
The installation itself is very easy, even a Custom beginner can do it. RPM has a great sound. It is the best sound for air-cooled 4-shot.
It is a high-pitched sound. The only thing that concerns me is that there is some exhaust leakage from the assembly, and the Instruction Manual says that leakage from the assembly is Spec. I heard that there is no problem with the quality, but if you are concerned about it, you should apply Liquid Gasket.
Also, is carburetor setting required? I think it is necessary. My XJR400R has a tendency to hit the head at high rpm, and the acceleration and top speed become slower.
I changed the main jet from OEM No. 90 to Key Star No. 87, and it improves the blow up, acceleration from the latter half of 5000 rpm, and the maximum speed is increased. I think it will be the replacement of jets.
I am going to take the time to do it because I don't have the Settings out there yet. If you don't want to do it yourself, I think it would be more perfect and faster if you send it to a Shop.
View detail
Satisfied
There's an exhaust leak at the assembly
It was difficult to install!
It's quieter than you might think, so you can ride in peace?
Can I wear the End Baffle?
View detail
Is it too loud without End Baffle?
I managed to do the installation myself There is an exhaust leak in the assembly, so Repair with a liquid gasket is necessary
It's a good way to get out of the car, so you'll get a low-mid speed cover Now I'm applying exhaust pressure with End Baffle, so it doesn't bother me so much, but without If you ride with Baffle, you need to adjust the carburetor
After 8,000 RPMs, the engine blows up to Smooth, and the OEM Exhaust System will give you the best results It's comfortable and runs with a race ish sound
The exhaust noise is a blast; the Initial ModelBANDIT is a low 250cc Torque Since it's a four-cylinder, it has to be blown to some extent at Start, and when it is, the explosion is too loud So I can't ride without End Baffle So, I can't ride without End Baffle
Style is a lighthearted Image! The weight can be reduced from the OEM
View detail
It stuck to BALIUS 1.a Manufacturer -- it changed from the unknown external Muffler.Sound of the sound is carried out that it is easy to be splendid.the external Muffler had reached -- a sake -- a Tandem step -- a Stay did not suit, but it struck and bent
It stuck to BALIUS 1.a Manufacturer -- it changed from the unknown external Muffler.Sound of the sound is carried out that it is easy to be splendid.the external Muffler had reached -- a sake -- a Tandem step -- a Stay did not suit, but it struck and bent and stuck -- ww cannot be the influence of ww Stay which coped with it at the Pate peak although exhaust leakage was carried out from the set part when sticking -- ? -- it is quite satisfactory although it was slightly regrettable only there! View detail
no, ~ -- although a certain amount of anticipation was carried out, it is explosive sound roaring splendidly (a smile -- it is a word and is like [ which is regarded as a straight pipe or ?? ].) Although I think whether whether it deals with an automo
no, ~ -- although a certain amount of anticipation was carried out, it is explosive sound roaring splendidly (a smile -- it is a word and is like [ which is regarded as a straight pipe or ?? ].)
Although I think whether whether it deals with an automobile inspection is that it is doubtful (impossible probably), I think that it is good for the bottom enjoying a fresh sound briskly.
Existence of Ho of a car body is conspicuous rather than showing the presence of a muffler, since appearance is [ the muffler itself ] thin.
It seems that the model before regulation is generally more popular although the model after regulation has come out now.
-
View detail