- หน้าแรก
- อะไหล่แต่ง
- ระบบไฟมอเตอร์ไซค์
- ชุดไฟส่องสว่าง
- ไฟเลี้ยวอื่นๆ
- KELLERMANN
- KELLERMANN: ไฟ LED 5V - 9V Specification for Vehicle Boost Unit i.SED V6
ไฟ LED 5V - 9V Specification for Vehicle Boost Unit i.SED V6
- รหัสสินค้า: KM123-966
-
- IN STOCK
- Out stock
- KELLERMANN
- |
- 0.0
- (0 ทบทวน)
Please login to check coupons
จำนวน
สินค้าแท้ 100%
รับประกัน 7 วัน
รับเงินคืนฟรี
ราคาสุทธิ
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
ปริมาณ : 1 ชุด 2 ชิ้น. ■Turn signal voltage 5-9V specification bike2 pcs. per set
รายละเอียดคำถาม
แรงดันไฟสำหรับสัญญาณเลี้ยวถูกตั้งไว้ต่ำกว่า 12V สำหรับรถสมัยใหม่ที่ควรจะมีไฟเลี้ยว LED. ดังนั้นเมื่อแทนที่ด้วยตัวบ่งชี้ที่ใช้งานทั่วไปไฟจะไม่สว่างขึ้นตามปกติเนื่องจากแรงดันไฟฟ้าไม่เพียงพอ. หน่วยนี้จะแก้ปัญหานั้น. รีเลย์ที่ทำงานตอบสนองต่อไฟแสดงสถานะและสามารถจ่ายไฟ 12V ให้กับไฟแสดงสถานะได้. ไฟเลี้ยวที่ใช้งานทั่วไปจะทำงานอย่างถูกต้อง ..
จำนวนหน่วยที่ต้องการขึ้นอยู่กับการเดินสายไฟของรถ. หากไฟกะพริบแต่ละตัวแยกจากกันจำเป็นต้องมีหนึ่งอันสำหรับไฟกระพริบแต่ละดวง (2 ชุดต่อคัน).
หากเชื่อมต่อด้านหน้า / ด้านหลังขวาและด้านหน้าซ้าย / ด้านหลังแบบขนานต้องใช้สองชุดชุดหนึ่งสำหรับด้านขวาและอีกชุดสำหรับด้านซ้าย (ต้องใช้หนึ่งชุดต่อคัน).
กรุณาตรวจสอบสายไฟของรถก่อนซื้อ .. The voltage for turn signals is set lower than 12V on recent bikes since it is expected that they will be equipped with LEDs.Therefore, if you replace the turn signals with universal turn signals, they will not light up properly due to insufficient voltage.This unit solves this problem.This is a relay that operates in accordance with the movement of the turn signal, and enables 12V to be supplied.Universal turn signals will now function properly.
The number of units required varies depending on the wiring of the bike.If each turn signal is independent, one is required for each (two sets are required for one bike).
If the right front/rear and left front/rear are connected in parallel, two are required, one for the right side and one for the left side (one set is required for one bike).
Please check the wiring of your bike before purchasing.
จำนวนหน่วยที่ต้องการขึ้นอยู่กับการเดินสายไฟของรถ. หากไฟกะพริบแต่ละตัวแยกจากกันจำเป็นต้องมีหนึ่งอันสำหรับไฟกระพริบแต่ละดวง (2 ชุดต่อคัน).
หากเชื่อมต่อด้านหน้า / ด้านหลังขวาและด้านหน้าซ้าย / ด้านหลังแบบขนานต้องใช้สองชุดชุดหนึ่งสำหรับด้านขวาและอีกชุดสำหรับด้านซ้าย (ต้องใช้หนึ่งชุดต่อคัน).
กรุณาตรวจสอบสายไฟของรถก่อนซื้อ .. The voltage for turn signals is set lower than 12V on recent bikes since it is expected that they will be equipped with LEDs.Therefore, if you replace the turn signals with universal turn signals, they will not light up properly due to insufficient voltage.This unit solves this problem.This is a relay that operates in accordance with the movement of the turn signal, and enables 12V to be supplied.Universal turn signals will now function properly.
The number of units required varies depending on the wiring of the bike.If each turn signal is independent, one is required for each (two sets are required for one bike).
If the right front/rear and left front/rear are connected in parallel, two are required, one for the right side and one for the left side (one set is required for one bike).
Please check the wiring of your bike before purchasing.
คำอธิบาย
* ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/