Reviews
Air duct cover installation
SSK 's Air duct cover is lower in price and better in shape than other products. The installation requires ingenuity so as not to be scratched, and if it does not get used it takes about 2 hours. If you are not confident in assembling it would be better to ask DeLar to do it. After installation the appearance of luxury is considerably UP.
There is considerable degree of satisfaction as it gets to notice when driving.
View detail
Fits: DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Oil cooler guard
I installed it because the bouncing stones of the front wheel Tire etc. hit the Oil cooler.
Just remove the Cover around the Oil cooler and paste it with the attached Double-sided Tape inside the Cover.
Even if Double - sided Tape is peeled off, it is not worrying about dropping because it is Large bigger than Cover.
I am also solid, so I think I can firmly Guard.
View detail
It purchased by appearance serious consideration.It is better to carry out paint application as it has written on the description, although form is good.The surface is fairly coarse if it remains as it is. It is although attached without pain
It purchased by appearance serious consideration.It is better to carry out paint application as it has written on the description, although
form is good.The surface is fairly coarse if it remains as it is.
It is although attached without paint application for the time being.. Although it fixed with double-stick tape, the Tapping screw also attaches
attachment.Since appearance is spoiled as attaching a Tapping screw also by
, it is fixing only with double-stick tape.
View detail
It purchased by appearance thoroughly. attachment is really troublesome. (A SIDE & Front cowl is removed) weight became half. Considering the field of Cost & attachment, a degree of satisfaction is common.
It purchased by appearance thoroughly.
attachment is really troublesome.
(A SIDE & Front cowl is removed)
weight became half.
Considering the field of
Cost & attachment, a degree of satisfaction is common.
View detail
They were a feeling of a Fit, appearance, and a both very satisfactory thing however, breathing came to be seen [ whether the suction amount decreased and ] in a high rotation area. It has in a Circuit or high speed operation, and is deep.
They were a feeling of a Fit, appearance, and a both very satisfactory thing however, breathing came to be seen [ whether the suction amount decreased and ] in a high rotation area. It has in a Circuit or high speed operation, and is deep. View detail
Fits: DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S
[Webike Monitor] In order [ which protects the Oil cooler which says and which has a dent in coming out ] to & Hide, the Mesh of purchase honeycomb shape brewed the high grade feeling, and the dent of the Oil cooler was hidden in as expected.
[Webike Monitor] In order [ which protects the Oil cooler which
says and which has a dent in coming out ] to & Hide, the Mesh of purchase
honeycomb shape brewed the high grade feeling, and the dent of the Oil cooler was hidden in
as expected.
when boiling
and this part at the time of new car delivery of cars and having equipped with them, it was thought a few whether regret dented the
Core.
View detail
Since carbon parts were introduced little by little, the front duct was also changed into the thing of the a-tech. An opening spreads and I think that the charging efficiency of a ramair is increasing. If it also became a weight saving since it wa
Since carbon parts were introduced little by little, the front duct was also changed into the thing of the a-tech.
An opening spreads and I think that the charging efficiency of a ramair is increasing.
If it also became a weight saving since it was light compared with normal, the problem was the work which is not when ? attachment was delayed for a while although an upper or Ur is removed, but spending many hours.
If it attaches, a carbon design looks nonchalant and it is quite actually cool! The same front face as everybody is recommended in the direction that I am disagreeable.
View detail
Fits: DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It is a firm impression rather than it was effective to the damage prevention up and dress-up up by the stepping stone to an oil cooler and having also considered ! stainless raw material. Since it was attachment by double-stick tape, before knowing,
It is a firm impression rather than it was effective to the damage prevention up and dress-up up by the stepping stone to an oil cooler and having also considered ! stainless raw material.
Since it was attachment by double-stick tape, before knowing, it did not separate or slight uneasiness was, but it became touch good.
View detail
Since the tank side cover and the frame cover were attached, it attached in order to unify the circumference of an engine. Since the location of an attaching bolt and direction differed from pure parts considerably although it is equivalent-shaped mos
Since the tank side cover and the frame cover were attached, it attached in order to unify the circumference of an engine.
Since the location of an attaching bolt and direction differed from pure parts considerably although it is equivalent-shaped mostly, full fixity of the bolt did not have to be carried out, but it had to stop on the way, and fixing by a screw lock (although it is my case ..) etc. had to consider the fixed method using the head very well.
Moreover, since these parts are attached to just beside [ engine ], pure parts become quite thick, but the heat from an engine can be intercepted now by the heat insulating material being attached to this, and stretching on the flesh side, and heat is suppressed considerably.
Above all, since appearance is dramatically good, it changes, and it thinks that it was good.
View detail
Fits: DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198S
They are a joke and a thought at carbon parts. It purchased. In the midst of having attached, the attached carbon and the parts which adjust the height of a car body have been lost. Since it is an inner side, the hand was put in, and the parts
They are a joke and a thought at carbon parts.
It purchased.
In the midst of having attached, the attached carbon and the parts which adjust the height of a car body have been lost.
Since it is an inner side, the hand was put in, and the parts were not made in fixation but it has separated from them as it is.
However, although parts did not fall to a ground surface and the car body was checked, it is not found after all but is lost.
The parts which were in the house somehow were able to be substituted and attached.
or a manufacturer to double-stick tape follows from the beginning -- some -- an adhesive bond -- like -- I want you to come out, and to carry out that correspondence somehow so that it can fix
Regrettable this time, because other products were good.
View detail