Reviews
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting is required, but can be easily done with scissors.
Although the protection is better than nothing, it is not as good as nothing at all.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting to size is required, but can be easily done with scissors.
I think it is better protection than nothing, but when you actually fall down, the degree of bruising etc. will vary quite a bit if you don't have it on.
It's best not to fall, but you never know what can happen….
View detail
Color faded.
The mesh fabric is more airy than the company's previous Inner protector, and the Protector also has a mesh construction, making it ideal for summer landings, and I am satisfied with it.
The downside is that when I sweat, I get black stains on the Air Rhythm shirt I was wearing underneath and the White T I was wearing over the inner protector, and they don't come off even after washing.
I am not sure if it is fabric fading or Protector fading.
I will wear it with black underwear and a black T next time!
View detail
![BIONIC PLUS KNEE PROTECTOR [Bionic Plus Knee Protector]](https://img.webike-cdn.net/catalogue/images/57818/6506219-10_001_TS.jpg)
Parenthesis OK
The material is soft like hard rubber and the fit is not bad.
L/XL is just right, Rubber has stretched somewhat.
If you walk, they will slip down. Especially with synthetic fiber pants.
The spec. of the upper thigh fixing is slightly different from the product image.
Kneeling will shave the Mark of AlpineStar.
I think Komine is more defensive.
But Parenthesis is fine.
View detail
Relief
It seems to be strong but not too large, so I think it will go well with thin summer wear. View detail
![NUCLEON FLEX PRO Ci [New Cleon FLEX PRO Ci] Protector](https://img.webike-cdn.net/catalogue/images/86755/6702121-114-fr_nucleon-flex-pro-ci-protector-right_TS.jpg)
I want to put this in the chest ProtectorPocket of the Mesh jacket.
Even if I wear a mesh jacket in summer, it is hot when I put on Protector. I bought this as a countermeasure.
I bought the L Size and am using it in my Rough & Road Mesh Jacket RR7313. (The chest Protector of Laflo is fixed not to move because of its vertical length.)
Comparison is made with the following three Mesh protectors.
(The common flimsy mesh protector without CE is better than no mesh protector, so it is not included in the comparison.)
◆Comparables
・Komine SK-831 (one body Type CELevel2)
・Icon GUARD D3O LP1 CHEST (one body Type CELevel 1)
・DAYTONA SAS-TEC CP-2 (Split Type CELevel 1)
◆window street
The airflow is unquestionably the best, similar to Icon D30, but the split type has less area to protect than the integrated type, so the airflow is better. In return, the safety is not as good as the integrated type, so it's a matter of which one you take.
The Mesh portion is wider, thinner, and firmer, so it does not follow the skin easily and floats easily. I think this is the reason why it feels so airy.
◆Safety
Its defensive rank in Total is second only to KomineSK-831.
CELevel2, although a split type, is not particularly thick and thinner than DAYTONASAS-TEC CP-2, but CELevel2 is amazing.
The KomineSK-831 has a prominent defense at the expense of weight and thickness, so it's no wonder it loses out to this one.
By the way, it is a little hard resin, but it bends easily if you bend it. But when you tap it, it is quite hard.
I think this is Level2, but it's a standard set by people smarter than me. It must be more correct than my own sensibilities.
Well, DAYTONASAS-TEC and IconD3o are more squishy, so they seem safer. (Both CELevel 1)
Of course, this is a sense of security that cannot be compared to the flimsy, non-standardized mesh protector.
◆ Weight
Quantity:Pair (for Left and Right) and weighs about 300g. In order of lightest to lightest, DAYTONACP2 (155g) 、IconD3o (206g) This. (300g) 、Komine (650g) 。
DAYTONA is light - half the weight. 300g is heavy! I don't feel it's heavy if it's about 300g, but it feels a little heavy when I open the fastener of Jacket.
ChestPocketQuantity:Pair (for Left and Right) It would be easier to understand if I say that it is like putting a smartphone in a
General Comment
Quantity in summer:Pair (for Left and Right) This NUCLEON FLEX PRO Ci is the best choice to put in the Mesh jacket with ProtectorPocket.
CELevel and price, breathability, thickness, softness, all good. The only drawback is that it is a little heavy....
It has a strong and unique scent like a perfume and is used as a substitute for air freshener in Jacket.
By the way, the following is a list of applications.
For cheap price = DAYTONACP-2
Emphasis on defense and coolness = KomineSK-831
I want to wear Slim with a good integrated shape = IconD3o
View detail
![NUCLEON KR-CELLi [New ClioN KR-CELLi]](https://img.webike-cdn.net/catalogue/images/52889/6503919-002-fr_nucleon-kr-celli-protector_TS.jpg)
The most cost-effective summer back protector
Used for Rough & Road's RR7313Mesh jacket.Size is M is Exactly the length of the ProtectorPocket.
Many CE Standard-compliant soft types are heavy, but this L size weighs only 303g, which is not too heavy.
And what I expect the most is the Balance between wind shedding performance and protection.
It is unfortunate that CELevel 1 is only available, but it can't be helped because even Level 1 is not enough for Mesh Type. It is the minimum required.
The surface of the actual product is surprisingly hard. (Hard in the direction of crushing Honeycomb) It is expected to be more than the indication of Level 1.
However, it is soft and quite bendable in the direction of bending, so it does not seem to affect the body's movement.
The coarse Honeycomb surface is hard, but the fine CushionMesh inside is soft and comfortable to wear.
Breathability is naturally good, and the wind there is strong. (strength enough to be recognized as wind) When the wind blows, you can feel the wind on your back. It is a very good ventilation system.
It is an air ventilation system that cannot be compared to Protector, which has ventilation holes pocked with holes.
I think it is very cost-effective to sell for less than 6,500 yen for this performance.
View detail
Plus peace of mind.
Purchased this for a Mesh jacket of the same Brand. It protects not only the upper part of the chest but also the whole chest, so I feel more secure. I was a little worried because the price was so low, but when I saw the product in the mail, I thought it was surprisingly well made and would be sufficient. It fits the jacket perfectly and is easy to put on. View detail
Leatt brace 22MODEL DUAL AXIS Knee Shin guard
The Protector moves with the movement of the knee, and the shin area is also securely guarded, so there is a sense of security. The fit is firm, so it is not so bad in the summer, but it is a little over 10,000 yen, well made and cost effective. Once the size is adjusted with Magic tape to fit the lower leg, it is easy to install and remove because of the Hook type. I am a person who never misses out on protectors for riding around town, touring, etc., so this was a good purchase for me. View detail
Chest Protector should be equipped
Since I use both KUSHITANI and Thailandichi's Wear, I think this Protector is cost-effective for both.
If running, Protector also allows air to pass through without steaming.
After getting off the Motorcycle, it feels somewhat obtrusive, but when riding it does not feel uncomfortable.
In addition, since it is a Button and Surface Fastener, installation is easy.
I think it is worth buying Chest Protector because it is low-priced and easy to equip. It is definitely safer to have it than not to have it.
View detail
I bought it for peace of mind.
I wear it all the time when I ride my motorcycle, and the full zip makes it easy to put on and take off. I recommend this jacket for beginners who don't have a full-fledged motorcycle jacket yet, or even for Veteran riders for a short ride in the neighborhood. View detail
I need a little more R.
It is thin and light, but it is too flat overall, and in my case, I don't feel much Fit.
Maybe if you are a skinny person?
View detail
Hot, thick.
We had a good feeling with SAS-TEC's Chest Protector, so we tried it on the back.
The Protector up to now has been the same LEVEL 2, but it feels much thicker due to the difference in Material.
I also tried putting it in a mesh jacket, but felt some steam just by wearing it.
I think it is safe, but it was not quite what I had in mind for wearing.
View detail
Excellent ventilation
As it looks, it has excellent ventilation, does not retain heat, and is soft, so there is no foreign body sensation.
However, as you can see, the bottom side is pointy, so depending on the Pocket, it may shift to one side or the other.
View detail
Ideal for summer petit touring
I bought this for everyday casual riding. It is a quick-drying T-shirt, and if you put on a regular T-shirt on top of it, you can ride a motorcycle without feeling uncomfortable. It is a good feeling. By the way, my size is 174cm in height, 100cm around the chest, and 74cm Waist, but M Size is just right. View detail
![[Repair/Option Parts ] Ligament Set for K Series](https://img.webike-cdn.net/catalogue/images/76651/kp121_001_ns_TS.jpg)
Purchase PODKnee brace Repair kit
The initial investment is a little high, but I can easily fix it by myself afterwards, and I've heard about sending it to the manufacturer or expensive repairs.
The bad part is that the pads that hold the Magic Tape in place come off easily, and if you don't make the tape tougher, you will have trouble cleaning it.
View detail
Used as inner protector
Purchased for off play.
As a beginner, I want a Chest guard, but which one is Inner and which one is OuterType…! I was wondering which one is Inner and which one is OuterType…!
The Shoulder guard is removable and the GuardBody is slim, so I was able to attach it under the Wear without any problems.
It is recommended because it is very easy to detach and reattach.
View detail
Excellent ventilation
I am wearing a mesh jacket, but it is old and the spinal pad is made of a urethane board. The Spinal Pad is made of a urethane board, which is not breathable, so when I stopped, it was sticky and stuck to my back. I looked for a waffle-shaped Mesh Pad that has good ventilation, which is now the mainstream, and found this product that seemed to fit in terms of size.
My impression when driving is that it is significantly cooler when running because of the wind draft. The shoulders inevitably come in contact with the back, so there is some stickiness, but the entire back is now cooler and less stuffy when the vehicle is stationary. Safety is not so good since it is made of urethane and mesh, but I think it is better than nothing.
Considering the comfort when running, I think the cost performance is excellent. If you are looking for safety, I think you should buy an expensive Mesh jacket or Spinal Protector. If the size fits, I would recommend replacing it.
View detail
Full face, it's a little hard to turn my neck...
Motorcycle：MT-09
Helmet：SHOEI Z-7
Was the one you received as per Image?
The Large size is just like the Image. It is a large size like the thin neck pillows that you can find at a hundred-yen store. The weight is not bothersome even when wearing it or holding it in your hand.
[How did you feel about the Fit?
It looks good. But I am not using it for Off driving......................................
Even when touring long distances on the road, it is unlikely to be heavy, cramped, or tiring.
The Belt is attached to the neck or shoulder and removed, but if you are not used to it, you may have a hard time at first.
How was your experience with it?
I ride MT-09 and I have no problem with the position of this model.
As expected, it was difficult to move my neck up and down.
However, it is not to the extent that it does not move at all, so it is not to the extent that it is difficult to see diagonally behind you at intersections or when changing lanes.
However, the feeling may be slightly different for SS with a tight forward tilt or Large Cruiser with a backward tilt.
[Was there anything that disappointed you?
The large diameter for the neck is in line with the product's aim, but it would be better if the large diameter could be adjusted with a snap button in front of the neck to fit the helmet.
What are the specs of the product, such as protector?
I think it will serve the purpose of reducing the impact on the neck when the helmet is worn and the head hits somewhere.
How did it compare to other products?
Neck brace is basically for off duty, so I don't have anything to compare it with...............................
Other items that would be helpful
What made me buy it:I bought it to soften the impact on my neck when I hit my head somewhere while wearing Helmet. I have not had any bumps or accidents, but I wear it as a precaution.
Included Parts:No
Note:It is washable. The surface is a synthetic fiber cover and belt, which can be hand washed in a basin of warm water.
The inside is made of urethane, like the letter C in the Alpha bet. This can be washed by hand as well.
Opinions and requests to Manufacturer:I think it would be good to Appeal to everyone to wear more. It's cheap.
View detail
Relief
I had to repurchase because of damage caused by a fall.
Protector melted to mush but legs are safe!
It is highly protective, yet easy to wear and does not get in the way.
View detail