Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Balance between appearance and practicality
I prefer the cooler look, but I was looking for a proper Fender, and I use Payton's Stainless Steel Fender, which has a good balance of looks and practicality. 。
■The Purpose and Role of Fender.
The Fender is the outer plate Parts installed to cover the Tire, and the Parts that cover the front wheels around the front wheels. "Front Fender" We call it "the
The Fender is a large part that prevents mud, sand, small stones, etc. from rolling up from the Tire and hitting the BodyBody or surrounding pedestrians when driving, and also prevents contact between the Tire and pedestrians, etc. to prevent entrapment accidents. In the case of water-cooled Radiator, there is a possibility of foreign objects or damage to the Radiator, so please be careful.
■Non-Mudguard Features ■
Protect foreign objects from being caught in the Tire while driving.
? Protect Inner Tube of Front fork.
Stabilizer effect:By fixing to the front fork, front rigidity can be expected to be increased.
good point
■Material:Stainless, so it is resistant to corrosion.
Stabilizer effect can also be expected.
Stylish appearance, suitable for a cafe racer or an English-style custom.
A bad point
● The length of the fender is a little short, so be careful about mud splattering in the rain.
As a term relative to Fender, "Fender Eliminator I am sure many of you have heard the term
As the name suggests, this is a motorcycle without a fender. Naturally, rain and mud spray will cause the motorcycle body and rider to fly backwards, but it is possible to customize the bike to look stylish.
On the other hand, it is not a recommended customization because mud flies and front strength is reduced. →If possible, it is safer to use the Stabilizer (sold separately).
Incidentally, although it is not illegal to remove the Motorcycle Fender itself, it is necessary to submit a notification to the DMV in advance if the overall length of the vehicle body, etc., is changed as a result.
Car inspection and Fender*.
◎It is possible to pass the vehicle inspection without Front Fender. However, if Custom is judged to be dangerous without Fender, it will fail the vehicle inspection.
◎Cracks and dents also fail the inspection if they are dangerous.
→ Cracks and dents may pass inspection if corrected.
* * * Fenders are not particularly prominent parts, but they make a large contribution to the safety and comfort of motorcyclists and riders.
The design varies from motorcycle to motorcycle, so it is interesting to check what kind of Fender is equipped on each motorcycle.
View detail
It is a quality that makes it a Repeat!
The quality was identical to the product photo.
I bought a Manufacturer's first, but returned it because it fell a few steps short of the sample.
Comparing the two, Speedra would win except for its weight.
In terms of quality, it is close to HondaOEMOP's Dry carbon, and I guess the weight is the same etc.
It's more than twice the price, though, and since it's Matte, it's a plain girl.
After all, Material:Carbon Style beautiful here.
View detail
Fits perfect with OEM lamp
I like shorter version of OEM rear lamp. I'm happy. If you live in europe you can use original licence plate holder. ,:))) View detail
A little bit to long
In my opinion a little bit too long to fit beautiful to stock exhaust, but maybe with akrapovic muffler will looks perfect I dunno. View detail
Fits: HONDA shirley, HONDA dachshund
I put it on CHALY.
We have a product BALI, so we have to prep it.
Painted. I think it is good for the price.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Make a Chain.
Simply remove the previously installed item and install it in the same manner.
The product was just the right Size for MONKEY.
View detail
The quality is as expected.
I was a little worried because it was made to order, but the hole position was Exactly and I was able to replace it easily with Hexagonal Wrench1 pc. If you are interested in it, you can buy a Sticker. View detail
Magical Rear Fender CBR600RR
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE
ActiveFender Eliminator Kit for zx10r.
It looks good and is well made.
The License Plate Light conversion coupler is also included, and since all I had to do was change the wiring, even a novice like me was able to replace it.
It would have been better if it had a spec. that could be easily removed and attached in a short time when driving in Circuit.
View detail
Exactly for the 2024 model year.
I didn't know what year it would fit, so I took a chance and bought it, but the ExactlySize fits! View detail
I think it's a must for Fender Eliminator.
Fender Eliminator and installed because I was concerned about water rolling up from the road surface.
I think the dirt on the back side of the License Plate is better after driving on wet road surfaces.
(I can't look at this quantitatively, it's a personal feeling.)
I feel that the sand, etc. that rolls up to the lower LINK of the Rear suspension in front of the Swing Arm has also become much better. (This is also my personal opinion)
When the OEMFender was not removed, it was difficult to clean, degrease, and drill the holes mentioned below, so I removed the OEMFender.
This is an area that is difficult to check, so be careful. (I will buy OEM Parts from webike again)
Also, when installing, it is necessary to drill holes in the OEMFender, so an electric drill is required, even if it is a cheap one.
The included Double-sided Tape was packed and applied, but since it is a Rivet stop from the above hole drilling, perhaps just a few light layers of tape would have been sufficient.
Also, at first, I was reluctant to drill holes in OEM products, but when I checked the price, it was surprisingly cheap at around 2,000 units, so I did the work without worrying about it (laugh).
For your information.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit installed
It is an impression of Refreshing with a small number of parts.
Installation Instruction Manual is not included.
I was in the previous MODEL!
View detail
Refreshing around the Rear
We chose this one because it was Reasonable price than other Fender Eliminator Kit.
First of all, when I first received the product, the holes in the Plate and Bracket did not match, and when I inquired about it, I was told that a different model had been included.
When I actually installed it, I had a hard time removing the OEMFender first.
There is no instruction manual, so I had to loosen the bolt and remove the parts, but there might have been some parts that I didn't have to remove.
The space under the Seat is narrow, so the Coupler for the lights is quite difficult to pull out.
Also, I used a small-sized MONKEY Wrench because the included nut was a size I don't usually use, but I think it would be more efficient to prepare a socket that fits the size.
As for the License Plate Light, I did not want to cut the OEM harness, so I purchased a Coupler that fits there separately and crimped the Bullet Terminal to extend the Cable, but the wiring of the attached License Plate Light is too thin. But the wiring of the attached License Plate Light is too thin, so be careful not to break the cable.
Colgate Tube was used for the wiring path and fixed to the Fender EliminatorBody with inHemp palmac.
The key cylinder of the Seat lock is screwed into the inside of the car body from the side. (I can't help but feel that the Seat lock release has become harder)
Speaking of the seat lock, the OEM dust-proof cover cannot be used, and the keyhole is exposed, so I think countermeasures are necessary.
I process thin rubber sheet and attach it with strong magic tape to make it removable and to prevent mud and dust from entering. (I've only run it a few times, but so far the keyhole is Large strong)
It took a lot of time to install the new product due to various modifications, etc., but it is a recommendation because it looks like a reflection.
(Although this will make the water splashing up behind the Fender a little worse.)
View detail
Mud Splash Countermeasure
(Photo 1) The front fender is fixed to the black parts under the under bracket of the front fork with three bolts, which can be easily removed from the back of the fender with a ratchet wrench.
(Photo 2) Brackets attached to Fender 。 I also stuck a Fender extension on it to prevent mud splatter. 。 (2) Bracket might be better to put on later.
(Photo 3) BracketQuantity in (1):2pc is Quantity:Pair (for Left and Right) Note that the shape is slightly different in
(Photo 4) When a long Bracket was temporarily fixed with Bolt, the Fender was turned at an angle. 。 I thought maybe the parts were not very precise, but in fact it was because the bracket (2) hit the front side of the arrow part (the part where the brake hose guide was fixed) and was not in the correct position. (In fact, the bracket (2) was not in the correct position because it hit the front of the arrow part (the part where the brake hose guide was fixed).
(Photo 5) Finally, insert the Spanner into the gap between the Tire and Fender, tighten the Bolt from the top and bottom, and you are done.
Back paint was solid and did not peel off during the work. 。 Parts are very accurate, and no heavy lifting was required, nor did the Fender ever turn at an angle. 。 It would be nice if it were a little cheaper, but considering that Bracket has a solid thickness, it is not cosmetic.
As a complaint or rather a request, the Quantity of a long Bracket:Pair (for Left and Right) It would be nice if it says R or L so that it is easy to understand the 。 I thought it would be easier if the long bracket and spacer were welded together, since it took a lot of time to get the bolt through the triangular bracket, long bracket, spacer, and fender during the first temporary assembly.
I have converted to a down fender and attached a fender extension to prevent mud splattering, but I guess it depends on personal preference whether you prefer an up fender or a down fender. 。 By the way, I prefer Up Fender for MONKEY125.
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
Solid for the price.
The installation was easy with the Instruction Manual included.
Since there is no reflector, I installed DAYTONA's Slim reflector on top of it.
View detail
GCraft is as good as it gets.
I like it very much
Also, if the price were lower...
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Tie Wrap Fixing is too sad.
The product itself is well Large body Large sturdy.
It is too bad that it is planned from the beginning to just stop at Tie Wrap.
If you use double-sided tape, it will be a hassle later, and the Tie Wrap itself has to be very long. (It is included in the product, but the quantity:2pc only)
In case of OEM Exhaust System, it is better to remove only Silencer. It will be a huge obstacle. It may be possible to put it on without removing it, but you don't want to get scratches all over it. It can be removed with 3 Bolts on one side. After all, it is faster and easier.
I didn't understand what the Instruction Manual was saying for a while because it was just text.
If you know what I mean. Manufacturer doesn't want to take care of anything." I think it says "I'm sorry, but I'm not sure. After all, there is no reference to the installation itself. I wonder what is this Manufacturer….
View detail
For prevention of dirt on rear suspension
Installed to prevent dirt around the rear suspension and link plate.
I was able to install it on our MAJESTYS without any particular modification, so perhaps it is designed for the previous term.
The texture is exactly like plastic, so if you are concerned about it, you may want to paint it black or the same color as the body.
The Screw rusted quickly, as everyone has said. Since it is not something that is frequently seen and is not a concern, we have not replaced it and have only treated it with a rust-converting agent.
This product is recommended not only for Fender Eliminator users but also for normal fenders, as it can significantly reduce mud splashes around the rear suspension area, Air cleanerBox, and Silencer.
View detail
Overall, KO!!!!
In my opinion, I am satisfied.
The product was also well made and easy to install, despite the large number of parts.
As expected, Daytona's products are very reliable.
View detail
I bought it to install it, but I couldn't.
[How is it used?
I bought it for the Rear Mud Splash, but unfortunately it didn't work.
Was the one you received as per Image?
Image was great, but I made a mistake and I just couldn't get it installed.
How was your experience with it?
Installation could not be done
I made the mistake of buying it.
[Points to note]
It is a good product, but could not be installed on the HUNTER due to the shape of the Rear Fender.
Of course, I tried to see if I could install it on the Front, but it was still impossible.
How did it compare to other products?
No comparison.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think the person who purchases it can install it on other models.
(As a precaution.)
I was wondering if the CT110 HUNTER CUB needs to be Rear Fender processed on the day of the product itself.
View detail