Reviews
The color is perfect with Front fork.
It is good to get Normal position. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
easy to grasp
Good texture and satisfactory as far as appearance.
The performance was easier to grab, but the original Lever was farther away, so it was made somewhat easier to grab by moving it closer to the first.
It would be easier to grasp if it could be made closer or if the bend was closer to the hand side.
Installation is easy with tools.
View detail
Easy to install
I had installed DAYTONA's Bar End, but the Bar End was too large and too conspicuous, so I replaced it with these parts including vibration reduction. The outside of the bar end is small and looks good. I feel that the vibration is slightly reduced. My vehicle is Material:I was not sure whether it was better to use a Stainless Steel Handlebar or an Aluminum Handlebar, but I chose the one for the Steel Handlebar for now. View detail
Good to have a sense of individuality in appearance.
Because of my short stature, my shoulders and back ache when I go long distances for long periods of time,
Quantity at stop:Pair (for Left and Right) It was difficult to check, so I bought it to try it out.
I'm happy with the look and feel more comfortable with more room in my elbows.
The company's Bar End and Quantity:Set exchange, handling also changes.
I look forward to seeing if the discomfort in Corner will go away with familiarity and riding style.
View detail
It works, but …??
It is effective, but it seems like the Gel should be a little thicker. View detail
Great bar for the price!
Great replacement for many naked original equipment,excellent upgrade, aluminum tubing much thicker than stock steel, Great bars and a good price.I like the rise and the bend, standard so no need to modify my clamps or add risers. Light and strong aluminum make for a great set of bars.Best handlebar I have found.Put the black high bend on my 13 mt09.Just need to drill the hole for the throttle mount so it doesn't rotate. Easy to do, just mark and drill.Couple inches wider than stock and a little taller.Thanks for the fast shipping and careful packaging. The only downside is that the shipping costs are very high.The economic shipping is no longer available. View detail
EZ-FIT Bar Low Installed on my 2022 SV650
About quality and texture: Feels OEM. The hole for securing the throttle fits perfectly. About the feeling of use: A little lower than the stock. It has a graduation scale to adjust the foward or back angle. Made my riding style a little more aggressive by going more foward. Difficulty of installation: 2/5. Suzuki Sv650 is very easy. Since it doesn't have too much tech, removing and replacing the cables and switches are easy. About shipping and packaging: Securely shipped with packing materials to the Philippines. Any concerns, cautions, or advice when purchasing: None! If you want to change your handle bar to a more lower profile go for this! View detail
It's not bad
[How is it used?
V-string feels higher in adaptive height. Due to posture change.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's not difficult as it's just a matter of replacing it. It is tedious, though.
How was your experience with it?
The same series I bought before had the hole positioned perfectly, but it was gapped by about 1cm, perhaps due to individual differences.
It's not hard to deal with, but if you don't have the tools, you may despair.
[Was there anything that disappointed you?
Since Handlebar is sold with pre-machined mounting holes, I thought it would be meaningless if the holes were gapped.
I think the Handlebar itself has a good texture and shape.
So far I've won one and lost one, so if I try it next time and the hole is Gap, I won't buy it again.
View detail
Too bad it didn't go in.
I wanted to attach it to the EZ-FIT TAPER BAR of the same manufacturerEFFEX, but it could not be attached because the rubber inside was too thick or it did not fit deep enough. I thought that I could attach it to the EZ-FIT TAPER BAR of the same EFFEX manufacturer, but it could not be attached. View detail
This is a good one!
I bought it because the one I had on two years ago was getting ragged.
I used to put it on with a Gas burner to burn it at a distance, but I still prefer Heat gun.
Dryer would have to be very powerful to make it work.
I use it to prevent deterioration of the Grip heater from UV rays and to reduce vibration of the Handlebar.
When I ride my Motorcycle in the middle of winter, I use light gloves because I am a Grich + Cover.
Even in that case, many are more than warm enough to both protect and warm the grich!
View detail
Installed with Lowdown Kit
[How is it used?
When we decided to lower the CBR1000RR-R, the OEM side stand would cause the vehicle to stand up too much when the vehicle comes to a stop. The short side stand was introduced because the side stand needs to be shortened to accommodate the lowered body.
Was the installation difficult?
I asked Motorcycle shop to install it because it was replaced at the same time as a Lowdown Kit made by another company.
How was your experience with it?
It has been about a month since the replacement and no problems at all.
The car body is at just the right angle without standing up too much or lying down too much.
View detail
Handlebar weight installed on both MT07EZ-FIT Bar. It works well!
The OEM Handlebar had vibration, which I thought was normal, but when I installed the Handlebar weight on the EZ-FIT Bar and drove, I realized how little vibration was transmitted to the Handlebar. View detail
Bar Weight
I installed it together with a Handlebar of the same manufacturer. The vibration to the handlebar was also reduced. I also installed the same manufacturer's Lever at the same time. The only regret is the color, I wish there was a normal gold color instead of Champagne gold, View detail
Handlebar
The quality of the product itself is excellent!
It is ideal for shortening and slightly increasing the length of the Bar End from NORMAL. It is also compatible with the same manufacturer's Bar End.
The handlebar is not as stiff as the original one, but it is still very stiff. The handlebar of the BEET is a little tilted forward, so be careful.
View detail
Handlebar
Position is the best.
Brake hose or sticking when installed, needs adjustment.
View detail
Bar End
I think the vibration or reduced.
I think the color of Gold should be darker.
View detail
Can be used with Racer9GT
Not listed in the compatible car models, but can also be used on the Racer9GT.
I have installed Y's Gear's Lowdown Link, but the body of the car is inevitably standing up.
It says that the XSR900 and MT09 are also compatible, but I was able to use it on my Racer9GT without any problems.
The unit can be installed without any modification. The angle and position of the spring can be installed without any problems.
We are very interested in your position as a member of Y's Gear's Lowdown Link.
There is no guarantee of compatibility, so please do so at your own risk.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z1000 (water-cooled), KAWASAKI Z900RS, KAWASAKI NINJA1000 (Z1000SX)
Lever
The grip is exquisite, and I think it is less fatiguing when touring. View detail
Satisfied with comfort of use
I used to get sore slowly after riding for about 2 hours, and I had to take a break and revive myself a little, or ride standing up to get over it, but this has helped a lot.
It does not eliminate the pain at all, but it does make a difference.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3
Looks good and functions well
I thought the MT-03's clutch lever was a bit far, so I decided to replace it with one that has an adjustable function.
I was going to choose Blue or Red, but since I still haven't decided how to change the body color, I decided on Black for now.
Replacement was done Smoothly without any problems, and the machining accuracy seems to be high.
However, I thought the packaging was a bit LARGE overzealous. I'd like to see more simple packaging at a lower price.
View detail