Reviews
Cospar good
I bought this for the cold season.
Parts Structure was Simple and easy to install.
I didn't expect it to be so effective since it is smaller than other companies' products, but when I ran, I found it did a good job of protecting my hands from the wind.
Also, the price is quite reasonable.
The only drawback is that the quality of the parts is a bit poor, but for the price, it is acceptable.
View detail
PeLePera and cheesy.
The shape is not bad, but the texture and construction is very Chinese cheap plastic, and the PelePera moves with the vibration of driving and wind. View detail
Cospa good
Cosmo
It's cheaper than ZETAetc.Off-roadManufacturer.
Material:It is plastic, so it is light and has almost no impact on the operation.
View detail
Cospa is good
Cosmo
AllPolypropylene, so it is light.
I'm not sure about this for a full-blown Off-road use, but it's just right for installation in a CROSS CUB.
The tool is also fitted with 1 pc of hexagon, non-adjustable.
View detail
I installed it on the CROSS CUB (JA10)
I bought it for winter protection of CROSS CUB (JA10), but I end up wearing it all year round CROSS CUB doesn't have the Clutch lever, so there is no problem to install the Left Side The Right Side has a lot of interference, such as the Brake LockLever The Bracket is mounted in such a way that it is dodged from the top instead of the bottom (although there is no problem with the mounting as well) (I also have the Left Side in place).Sporty Design is cool, but I personally don't I would like to see a more plain shape However, this time I chose Black, and the body is also Color:Because it was gray, it was not assertive, and it was fine In addition, it shakes by Idling at a traffic light, but it stops when you hold the Brake lever (larr; it doesn't matter) Oh, wind protection is good, and in the CROSS CUB speed range, wind pressure effects and wind cutting noise I don't feel any effects such as View detail
Installation is easy
Installation is easy, unexpected. If the Cover part got a little bigger, the cold might have been a little relaxing. If it rains a little, there is an effect. View detail
Exactly as a support for attaching Han Cover
Because it is a Compact, it is not intended for use as the original Knuckle guard, but rather Handlebar Cover is pushed by wind pressure or purchased to correct sagging downwards.
The target effect is perfect.
View detail
so so
I loosened the Clutch lever holder, Brake Caliper Holder and installed it between the Grip. It is a kind of well-fitted condition. It was better fitting condition than what was previously installed, but Nut (Inlet) It is in a state where Screw is idling in the making condition of.
That point was MinusPoint. Even though it is not resin molding, there is a feeling that Band and Nut were also good in this part. In addition, the attached Bolt seems to have a thin Plating, it has received rain and rust has occurred (I do not care too much though). Color variations are rich, so there may be additional purchases depending on the mood.
View detail
If the Master cylinder of a Clutch or a Brake is large, it cannot attach without the die length of an Arm being insufficient. It may be satisfactory if it is the Mini bike and an off-road system. -- I am black -- after carrying out Arm partial
If the Master cylinder of a Clutch or a Brake is large, it cannot attach without the die length of an Arm being insufficient.
It may be satisfactory if it is the
Mini bike and an off-road system.
-- I am black -- after carrying out Arm partial cutting, it extended by about 20 mm by general-purpose metal fittings.
A resin part does not have the sign of breaking even if it is supple and hooks some on somewhere, becoming brave, in
intensity, either.
I think that the
Design is sporty and smart.
View detail
It is not useful for protection against the cold. As it is, the cold of a more than is felt for the top where the area of the Knuckle guard itself is small because of the wind which escapes from a Slit. It is useful to merely prevent raindrops. Do
It is not useful for protection against the cold.
As it is, the cold of a more than is felt for the top where the area of the Knuckle guard itself is small because of the wind which escapes from a Slit.
It is useful to merely prevent raindrops.
Do raindrops strike? It can be prevented that a hand hurts although it cannot say that it does not get wet at all.
We can recommend it to those businesslike for the
Dress-up up.
View detail
XR100M was equipped in order to participate in the endurance race of midwinter. although interference with an axel wire, a switch box, etc. needed to be avoided, at the time of attachment, since the screw hole of the main part chose out of two places,
XR100M was equipped in order to participate in the endurance race of midwinter.
although interference with an axel wire, a switch box, etc. needed to be avoided, at the time of attachment, since the screw hole of the main part chose out of two places, fine adjustment was able to hear, and it was able to attach it well.
A design is also smart and the operativity of a lever is also satisfactory.
Without a hand being numb with cold, thanks to a knuckle cover, even if it carried out the continuous run of the inside of a race for 1 hour, it did not feel fatigue about the hand.
Since it becomes air resistance, a recommend is not carried out to the direction which aims at a high order, but if enjoying itself is a target, they are the necessaries of the endurance race of midwinter.
Since he is smart and it is not cold, of course, it is a recommend also at touring.
View detail