Reviews
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CBR600F, HONDA X4, HONDA CBR600RR, HONDA X-11, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB400SF, HONDA CBR600F
It's all about the look, isn't it? LOL.
Parts are expensive for some things, but this product was cheap.
Purchased
I wear a wrist band on my rear.
I thought this was better than a weird, elaborate design.
The Handlebar area is all NORMAL, so it's not too flashy.
It was good that it didn't float.
The OEM is a Plus screw, but it's deteriorated and is on the verge of licking the screw.
I pretty much gave up and did MODE, I'm glad you came around.
View detail
Fits: SUZUKI RF900, SUZUKI RF400, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R400, SUZUKI SV1000, SUZUKI SV650, SUZUKI SV400, SUZUKI GSF1200, SUZUKI GSF750, SUZUKI GS1200SS, SUZUKI GSX1400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI INAZUMA400
Buy Repeat!
The Filler cap is an easy way to enjoy Custom, but the important thing is the cost.
If it is a high one, there is also the 3000 yen range, but this is the early 2000 yen range that it is quicker to count from the bottom.
Moreover, it is a good antlion to say that it also has Brand power.
Antlion's Anodized is not too dark and is elegant without being obnoxious.
The shape is also hexagonal and supports tool tightening and wiring, and the O-ring is easy to maintain with OEM diversion.
This time, Titaniumium gold was installed on GSX1300R HAYABUSA with the main color of Gold which is the color of the body.
The Gold of the body is Orange color is strong, and the Gold of the antlion is thin, so the system is a little different feeling of wearing. Gold feels thinner than the real thing than the photo!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI INAZUMA1200(GSX1200FS), SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GRASS TRACKER, SUZUKI GSX-R250/R, SUZUKI INAZUMA400, SUZUKI RV200 VANVAN, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI GSX1400, SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSF1200, SUZUKI SV400, SUZUKI SV650, SUZUKI SV1000, SUZUKI GSX-R400, SUZUKI GSX-R600
That's great antlion!
The Filler cap is an easy way to enjoy Custom, but the important thing is the cost.
If it is a high one, there is also the 3000 yen range, but this is the early 2000 yen range that it is quicker to count from the bottom.
Moreover, it is a good antlion to say that it also has Brand power.
Antlion's Anodized is not too dark and is elegant without being obnoxious.
The shape is also hexagonal and supports tool tightening and wiring, and the O-ring is easy to maintain with OEM diversion.
This time I installed Titaniumium blue on GSR750 with Gun meta system as main.
It is slightly more Blue than Gun meta, but I can wear it without feeling so uncomfortable.
View detail
Fits: HONDA CB1300 SF, HONDA CB1000 SF (Big One), HONDA CB1300SUPER BOLDOR, HONDA CB400FOUR (air-cooled), HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA CRM250AR, HONDA MAGNA750, HONDA STEED400, HONDA STEED600, HONDA MAGNA(V-TWIN MAGNA), HONDA VTR1000FVTR1000F FIRESTORM, HONDA XR250MOTARD, HONDA CB400SS, HONDA CBR600RR
Maybe the color was too tannish.
I replaced it together with the Top Bridge because I wanted to remove it anyway.
Antlion's Titaniumium blue is a very austere color, so it may be good for those who like a calm atmosphere.
However, since I replaced the Top Bridge with an Aluminum Cut-out, I feel that it is a little too austere. (^_^;)
If it's a Cut-out Top Bridge, I think Silver would be a better fit.
View detail
There's a presence.
You can use it as a loading hook, so it's very practical. View detail
Fits: HONDA FORZA(MF06), HONDA FORZA(MF08), HONDA FORZA(MF10), HONDA APE 100, HONDA APE 50, HONDA CB1300 SF, HONDA CB400SF, HONDA CBR1000RR, HONDA DAX70, HONDA GORILLA, HONDA HORNET250, HONDA HORNET900, HONDA MONKEY BAJA, HONDA MONKEY R, HONDA Silver wing400, HONDA VTR1000FVTR1000F FIRESTORM, HONDA Silver wing600, HONDA X4, HONDA CBR600, HONDA VFR400
For a casual dress-up
OEM Material:I wanted to do something about the PlasticOil Filler Cap and chose this product from several candidates.
As you can see in the image, the Gold color is lighter and more elegant than the product image.
There is also a hole for Wiring.
View detail
Rear slider
Easy to install and looks great! View detail
Fits: HONDA FORZA(MF06), HONDA FORZA(MF08), HONDA FORZA(MF10), HONDA APE 100, HONDA APE 50, HONDA CB1300 SF, HONDA CB400SF, HONDA CBR1000RR, HONDA DAX70, HONDA GORILLA, HONDA HORNET250, HONDA HORNET900, HONDA MONKEY BAJA, HONDA MONKEY R, HONDA Silver wing400, HONDA VTR1000FVTR1000F FIRESTORM, HONDA Silver wing600, HONDA X4, HONDA CBR600, HONDA VFR400
Good textures for conspicuous places.
The NORMALFiller cap of MONKEY125 was replaced with this one because it was cheap plastic.
Antlion selects materials according to their use, and this affects the color of Anodized quite a bit.
We chose Titaniumium blue as the best match because it is a calm color and not too flashy.
However, the aluminum filler cap gets quite hot right after the engine stops, so you need a tool to open it.
View detail
Fits: YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200
Position
I installed it on my xjr1300.
The xjr1300 has a Handlebar that is far away from the waist, but it's not a problem.
Since I put this on, the strain on my lower back has been significantly reduced.
Recommendation
View detail
drastic change
I put it on my Model 5 SR and it works great, just a little twist of the Axel and it accelerates like I want it to. I haven't tried it yet, but it seems to increase the top speed, so I feel good.
I chose the hard anodized aluminum one and the texture is very good. I'm very happy with it.
The installation was a little difficult because I am clumsy, and I had to push the Pulley in while hooking it to the Spring which comes out after taking the Pulley. It was better not to read Instruction Manual because it was confusing. Just remove and install as you see.
View detail
I'm playing a role.
It supported me when I was standing on a slope.
I think the SliderBody shaves off about 2 minutes.
The Material may be softer than you think, so if you've got the speed, it's going to be aggressively cut down.
View detail
as insurance
I think you should buy one if it will save you some money on repairs. The installation was Bolt On as well. View detail
as insurance
No problems with quality and installation.
The Slider became the support against the ground firmly, and Cowl etc. of the upper part of the body were unharmed though I accidentally did a standing fall on a slope.
I'm sure the results would be different if the speed was higher, but I think it does its job well.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
It can be used for NSR50.
The NSR50 OEM Stem Nut and Other Brand Product is a Cap Nut, but I was looking for a Penetrating Nut that I could use to install the RAMMount ForkStemBase. The shape of Nut is Fashion. The shape of Nut is not normal hexagon, but Fashion. View detail
Expensive, but high class anyway. Stand out
[Usage.]
Conspicuous Custom.
High quality.
The fact that it's Foldable also relieves some of the worry about it folding.
You only need to change the tip and not break the MASTER.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
I agree
[Included Parts:were they on?
minimum
[Was there anything that disappointed you?
No
After all, antlion has a good texture.
It's only a shaving, but it makes sense.
View detail
Cool
The texture is good
Cool
I'm very happy with the price.
There's no particular change in performance.
Cool.
I'm fully satisfied.
View detail
antlion antlion Rear slider
I was worried about it, but I bought another ManufacturerSlider because it was inexpensive and had many colors, but I had to process it by myself, and I failed to cut it! So I bought it at WeBike, and this is the loss of money of buying cheap things (reflection) (-_-;) However, there is too little color variation for the high price, and it is somewhat unsatisfactory for the emphasis on DesignParenthesis. View detail
antlion antlion Front slider
I was worried about it, but I bought another ManufacturerSlider because it was inexpensive and had many colors, but I had to process it by myself, and I failed to cut it! So I bought it at WeBike, and this is the loss of money of buying cheap things (reflection) (-_-;) However, there is too little color variation for the high price, and it is somewhat unsatisfactory for the emphasis on DesignParenthesis. View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250AR
Cannot search Bar code.
I had it installed last time and loved it.
A friend of mine was deprived of it because he was going to do a long distance Off-road trip in a hurry, so I bought it again and installed it for myself. (I got the money)
Unfortunately, since I'm repurchasing, I should be able to do a Bar code search, but for some reason, when I do a Bar code search, HarleyParts comes up.
That was the only thing I was very disappointed about.
I changed only Nut to HEX Cap Nut, and applied Screw lock.
When there is a thing that the mouth of the Axle Shaft cannot pass the screw, please shave it. It was written.
Unfortunately, it didn't go through, so I put Drill through.
View detail
Ideal for people with short fingers
If you have small hands or short fingers, you may find it difficult to grip the brembo Radial master OEM lever.
I can barely stay at the very front, but I sometimes get cramps in my arms and fingers during touring.
This Lever is ideal for such people.
This is Lever for Japan people in JAPAN.
Because it is easier to grip, BrakeControl is better, which reduces fatigue to the entire body and increases safety and security.
View detail