Reviews
This is an affordable exterior dress-up.
I saw the Screen bolt replacement on z900rs cafe on YouTube. Until then, I had no interest in replacing the bolt, but suddenly I became curious about it. I searched this site and found Speedra's Screen bolt and the size was perfect, so I bought it. The length of the standard silver bolt was 18mm and the Speedra bolt was 16mm, but I had no problem installing it. The Black Bolt on the Black Body gives a different impression. Silver-colored bolt is also good as MachineMachine, and Titaniumium color is also nice, so you can change it if you get bored. View detail
I put it on my ZX-25R.
It is very light and looks cool.
I think the price is a little high.
Overall, I am satisfied.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
Petit lightweight
I bought this Petit for weight saving and dress-up!
I have purchased this product for Screen before, so it has the quality and reliability.
These Parts don't stop once they start!
It is a world of self-indulgence and I recommend it to those who like it.
I wonder where I'll go next...
View detail
For a little dress-up
The bolt holding the fly screen was plastic in the OEM version and looked a little cheap, so we replaced it with this product.
The design is satisfactory with some meat removal, but I wonder if the price is minus for 4 Bolts.
It is hard to tell from other people that Size is being replaced, but it is good and satisfying for me.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
Additional purchases
It's a slight weight savings, but it's also a weight savings!
I think I've become a little more fashionable.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA CRF1000L Africa Twin, HONDA NC700X, HONDA CRF250 RALLY, HONDA 400X
One point
Black body, so it's a good match, so exchange!
It also reduced weight.
View detail
Texture is not bad.
Chose to change the color of Cowl to match the Body, but it is expensive…… View detail
Screen Poll.
I think it's nice! And it's a bit upscale. View detail
Combined with Screen Replacement
When the original Screen was removed, the resin Washer was missing, and the Rubber packing was also in tatters and had a Crack in the Screen, so it was replaced.
The quality of each item is good and satisfactory, but I wish the price were lower.
View detail
Not bad.
The design and anodized colors are good, and it stands out unexpectedly, so it is not bad for one point around the front.
It's not bad, but the workmanship is more subtle than I expected.
View detail
Dress-up
Purchased for dress-up purposes. Color durability needs to be verified. View detail
When I changed the Screen, I also changed the Bolt.
I guess this is how it is. I think.
I am conscious of the parts that have been replaced, so I want to replace other parts with the same color, even though the color is not that much different from the OEM.
View detail
More noticeable than I expected.
Normal parts were too plain and were replaced.
Before I put it on, I thought it would be self-satisfying, but when I put it on, it was surprisingly noticeable.
I was torn between Gold and Green Light, but decided on Gold to match the Rear Sets.
View detail
Fits: Others
I am satisfied
I thought it might be a little brighter, but it's not bad. View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
It's Red from One point! (^^)
I replaced the Screen bolt in Option in WR.
Originally, this Motorcycle uses a lot of Red for the One point, so it is a replacement of the Screen bolt by PetitCustom.
OEM is Black Plastic Bolt and Bracket is also Black.
It's not noticeable. (^^)
The weight of Bolt is almost the same.
It is well built and I would recommend it.
View detail
Nice
FrontQuantity for ZrX1200 DAEG:I chose Gold color, but Titanium color would be also good. The gold color might be a little too conspicuous. View detail
Fits: Others
It was shorter than OEM, but no problem.
It is 4mm shorter than the OEM, but I was able to install it without any problems.
Anodized colors are also beautiful.
View detail
SSKAluminum Cut Out Screen Bolt 1 Set of 8pcs.
The bolt holes are so small that I couldn't use my tools, but…
Looks good with 6 Screen bolts in Green.
The rest are two BlackUnder Cowl and also One point total 8 bottles.
View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA NC700X, HONDA CRF250 RALLY, HONDA CRF1000L Africa Twin, HONDA 400X
For use with Z400
[How is it used?
ZETA is used for Z400. I could have used another company's product, but I decided to use ZETA because it is a manufacturer that I used to use when I owned MOTARD and Off-road vehicles.
Was the one you received as per Image?
Anodized as per image (Red) coloration.
Was the installation difficult?
Easy to use, even a novice mechanic can do it with a hex wrench of the right size.
Curing tape around the Cowl mounting holes is perfect.
Be careful not to overtighten.
How was your experience with it?
1mm shorter than OEMBolt, but no problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Makeup Bolt diversion hang
If the Parts List is available online, you may be able to find the dimensions of the OEM Bolt first.
The best way to be sure is to remove the Bolt and measure it, then order it.
View detail
It was good
I bought it to change it while I was changing my Screen.
The texture is good, and I bought Black, but I think my face has tightened up and my parenthesis has improved!
View detail