Reviews
Circuit Running
I want to measure lap time in Circuit.
Purchased
I still need to know where to install the Sensor part and Wiring.
It was Large strange to pull it in.
We will verify if Time can actually be picked up properly.
View detail
Circuit Running
I bought this for a Circuit run.
As others have written, the Sensor portion of the
I am at a loss to install it.
Installation location, installation bracket, etc. are time-consuming.
It will take
You must be able to tinker with Motorcycle in a certain way.
Installation may be tough.
View detail
It works fine!
[How is it used?
I replaced the tank cap with a one-touch type tank cap so that I can refuel the SPIDI when refueling the NSR250etc.
Was the one you received as per Image?
Some other impressions are nowhere near as good, but the one I purchased was not bad in quality and was perfect in terms of accuracy.
Was the installation difficult?
I was able to install it with Bolt On with Bolt.
The diameter will be 115mm Tank cap.
How was your experience with it?
It is easy to attach and detach with the One-touch when refueling, but the refueling port has to be put down once, which has its advantages and disadvantages.
[Included Parts:were they on?
Packing and Material:Stainless Steel Screws are included.
[Was there anything that disappointed you?
None in particular. It seems to be a bit risky as it seems to be hit or miss.
I would like to make it common for all manufacturers. I would like to see this standardized.
View detail
Sensor installation is troublesome
[How is it used?
Circuit
Was the one you received as per Image?
Image Street
Was the installation difficult?
I want to remove the sensor when driving on the street, so I need to devise a way to install it.
How was your experience with it?
Sensor installation is troublesome
View detail
Thick and dependable.
I use it to practice on Mini bike cart course.
We understand that the brand prioritizes cost, but we have been able to use this product without any particular problems.
They are so thick that my knees rub more than usual on the Mini bike.
I think this is a good choice for people who want to scrape their knees with CircuitEvents for Large type cars.
The scraping sound is high and a bit embarrassing, but some people seem to use this sound as a threat.
I like it as it stands, but I am embarrassed by the Brand logo.
View detail
In Lap timer, the Popular
After all, it is difficult to find the Sensor's mounting position.
Use is fine.
Currently, I am using Button batteries, but when inserting the batteries, the lid is incredibly hard, and I was afraid that it would break if I put any more pressure on the claw.
Also, when I bent the BodyBracket, the paint peeled off ParaPara as shown in the photo (lol).
View detail
Recommended for introductory
I used it at Tsukuba 1000 without any problem.
It is a magnetic system, so it was inevitable, but Sensor installation was the biggest problem.
The LCD may be difficult to see from some angles, but the cost performance is excellent.
View detail
Great cosmetics and sliding comfort!
Simple and cost-effective!
And above all, it is comfortable!
I have used it twice at Circuit and I like the smooth sliding feel.
When I used to run on Slider, which has been reduced.
I was rubbing the footpeg with extra Motorcycle laying down.
The new Slider is heaped up so there is no more footpeg rubbing.
I am very satisfied with the product.
The only thing is that the gap between Slider and Base has a slight gap.
I am concerned about its durability in the future.
View detail
Used on NSR250R Racer
It is very good and easy to key less. I think the price is lower than other companies' products.
However, fuel may leak if the vehicle body is tipped over.
Note that in Race, Cap changes may require filling the Tank with explosion-proof material.
View detail
Knee Slider
Other manufacturers are too expensive and I can't afford them, but this manufacturer is inexpensive and helpful. I think that the manufacturing and adhesion are good. It has never peeled off. Also, it is thick and easy to use. View detail
Mounting position
Installed on GSX-R125 at Circuit Running.
I had a hard time finding a place to install the Sensor. I tried to install it around the Rear Suspension Link, but I am not sure if it will respond.
The thickness of the body is not so bad, so the installation space around the meter is also limited.
As others have commented, the included Magic tape is weak and insufficient, so I recommend buying it.
Convenient because it's rechargeable, and I'm satisfied with the price.
View detail
It's easy not to need a key.
When I was looking for a key less tank cap, I found a cheaper one, but I was worried about the quality, so I bought this one. This is a great product. (2NX) I used it on my SRX and was able to install it with the included Hexagon Bolt and Rubber buffer. I was worried because I had seen some information on the net that the length of the bolt was not suitable for other models or that the rubber had to be modified, but the SRX was large and strong. The only thing is that if you don't store it in a garage, it might be stolen by gasoline thieves, so you might want to think about that carefully. Also, I don't know what will happen if it rains or something. View detail
Compatible with most Circuits
When I went to run Circuit a few times, I became curious about how many seconds I was running and bought one.
The installation is easy if you are familiar with the electrical system.
The only thing that bothers me is the location of the Sensor.
Depending on the Motorcycle, it is very difficult to decide where to put the Sensor.
In the Racer's Under Cowl, the Sensor is deformed by the heat of the Exhaust System, so a little ingenuity is required.
It is very useful because it is easy to know the time.
View detail
Pay attention to the magnetic sensor mounting position and direct sunlight
First of all, the installation position of the Magnetic Sensor is troubling.
In the case of the Race car, I think it has a tight Under Cowl, so the installation position is quite restricted.
I have it over the Under Cowl around where the Side Stand was originally attached, but sometimes it misreacts …
It would be nice if the manufacturer could provide some installation examples.
Also, it stops working in direct sunlight in summer, or maybe it malfunctions? Or rather, it malfunctions?
Keep them in the shade when they are stopped.
If it's running, the wind may cool it down, but I've never had it go wrong.
Also, if you take the power supply directly from the battery, the battery will rise even if the power supply is off.
It is necessary to build a Relay or to remove the power Coupler each time (the instruction manual notes the latter).
I just bought a Lithium ion battery and the voltage was like 2V and I was shaking.
It is a mystery why there is so much dark current when it can be turned on and off.
View detail
Easy to refuel
I bought this product because of NSR-MC28, and I thought the key was troublesome when refueling.
I'm satisfied because I don't have to worry about refueling.
However, since the mouth becomes narrow, it is difficult to check the amount when refueling.
Of course, since there is no key, you need to make sure that you are not pranked.
Also, the Bolt that came with it was too short, so I prepared it separately.
View detail
Size and volume are solid, can be used for a long time.
Reasonably priced, it has a solid surface area and volume, and is somewhat firm and easy to use.
The sliding feeling is also moist and pleasant to drive.
View detail
I love the simple design!
I don't know how durable they are yet, but I do know they're reasonably priced, designed, and textured! View detail
LeverLightZiixKnee Slider
It's thick enough dovetailing with the surface of the road, and it's a great way to get a good feel for the full bank's uncertain terrain. The ground feel is a bit stiff fee-ring, but … I think it's wear resistant and has high Cost performance! And it's cheap! View detail
ziixKnee slider
The Knee slider is the lowest price on the market, and the ground contact and comfort is just what you need, and although it has a bit of a stiffness to it, it is thick and durable. I like it, so … turn it over or Quantity:Pair (for Left and Right) Replacing and so on, 3Quantity for all the racing suits that were being used.:Set replaced with new ZiixKnee sliders! Only 6,000 yen for this one - a regular Knee sliderQuantity:Price for one set! (Lol) And it's not even available on Yahoo Shopping! Me? I put in the We-Big app for this! View detail
ziixKnee slider
A great cosmetic product.Repeat3Quantity:This is the second set purchased View detail