Reviews
From a distance, the appearance is the original family itself.
Grip is slightly different when approaching the opposite of Title, but Merit seems to be more common.
First of all, the durability is more than that of the original, the slender grip can be adjusted with the grip of the palm, and most importantly, it is surprisingly non-slippery.
I had installed it around the handlebar of my Z125PRO once, but when I got the handlebar with the special High Solo, I installed it on the handlebar.
If the OEM grip is installed on the Z as usual, the OEM grip is installed so that the key part of the throttle, which prevents idling, fits into the groove of the grip.
This TZ Grip has no groove spec. and needs to be smoothed to fit on a normal throttle, so I will use it on a specially made High Solo for practice.
The advantages of this Grip may be utilized at subtle opening angles, and its durability seems to be good, so it may be good for practice use.
Incidentally, the original Grip has really good grips, so the mountains are shaved off in a good way and become partially flat.
I have a slippery outer surface, but this Grip doesn't seem to reduce easily.
The price is too good to pass up and the ease of use is not too bad, and there are many aspects of Merit that are different from the original, so it would be good to try it out.
Compared to the recent seismic isolation Grip, there is certainly more vibration, but on the contrary, there is a very direct feeling and it is transmitted to the palm.
View detail
Once a year.
I've been using TZ Grip since I was doing mini bike races. It works well with my deerskin gloves. It's not sticky and it's not slippery. I've been riding about 5,000 miles a year with Quantity:1 Set consumption. It's cheap, and it's a hassle that can be replaced in 10 minutes, so I'm happy with the Cost. View detail
นุ่มหนึบจับกระชับมือมาก View detail
นุ่มหนึบจับกระชับมือมากทำให้การขับขี่อย่างมั่นใจ View detail
Slender but grips well
I was looking for a new Grip for my TZr50R and finally purchased this product.
The deciding factor in the purchase
I bought it because it was inexpensive, had a good reputation, seemed to be easy to use, and was a product of a famous manufacturer.
I also like the slim Grip, so I like that too.
It is a person who does not pin even if it is called TZ Grip or RossiGrip, but I chose it to the extent that I tried it because the price is also a price.
[Impressions of using it]
I haven't run the bike since I changed it, but it seems to grip a lot better.
It's not intended for long-distance touring, so it's slim and fun to ride around the neighborhood, as Image.
The Grip that came with the car when I bought it was a different size and I had to replace it.
Products compared
I compared it to Pro grip's Grip.
I bought this product because I don't ride long distances and I had never used a Grip before and it was inexpensive.
【Review】
I think it's a solid Grip for the low price. I am very happy with the cost performance as I am not that particular about it.
On a side note, before I changed the size of the handlebar, I temporarily put it through the handlebar and it went in easily, but it gripped too much and I couldn't get it out. (Lol)
I blew on Parts cleaner and struggled to get it off, but that's how much it grips.
View detail
Reverse TZ Grip
If you are looking for a TZ Grip, you want the same shape as the TZ Grip, i.e. a thin, KnurlPatterned Grip.
The detail is perfect.
It's the skinny TZ Grip itself.
But the..
The Material of Rubber is not good...
It's hard and you can't expect an ogre grip like the YamahaOEMTZ Grip.
Furthermore, the square pyramid on the Yamaha OEMTZ Grip is a convex mold, whereas this one has a concave mold.
Sure, it looks like the TZ Grip, but its effectiveness is not far behind the OEMs.
It's a shame.
However, if you want that kind of vibe, or a thin, so-so Grip with good grip (and great durability), it's better than the YamahaOEMTZ Grip.
I can't recommend it as a replacement for the TZ Grip at all, but I can recommend it as long as it's something like that.
View detail
Cheap is justice.
I bought it as a grip for my mini bike.
I opted for the softer Rubber's Grip because it wears out so quickly.
Also, it's the cheapest of the 115?grips available at We-Big, which is why it's the cheapest of the 115?
View detail
It's not a bad product though
We purchased inexpensive and reliable Manufacturer items by Simple.
It is certain that Simple is inexpensive and reliable.
It looked good and the texture was good, so I was satisfied with that point.
But ... It's thin, is not it. I knew it, but it was pretty tough in the hands of Watakushi.
Although it is not hard, it is not a problem in terms of vibration, but because of its thinness it is a bit of a hydrangea at the base of the thumb
The part will come off. Grip strength is also necessary if you use it with bare hands because it is somewhat slippery.
Just as TZ says RacerGrip. Gloves required.
Even if you wear Gloves, long distances are getting tired.
I thought that I could use it for Almighty after a bit longer.
But this TZ Grip is nothing short of this tightness.
View detail
I bought it for SR400, very soft, classic design, low price but high quality, we recommend the classic style. *** I LOVE WEBIKE ***
I bought it for SR400, very soft, classic design, low price but high quality, we recommend the classic style. *** I LOVE WEBIKE *** View detail
Although he bought it with TZ Type Grip, unlike TZ Grip, the unit Pattern of a Grip has somewhat low delicately grip force.
Although he bought it with TZ Type Grip, unlike TZ Grip, the unit Pattern of a Grip has somewhat low delicately grip force. View detail
You may be hard to slide on a TZ type Grip. Also making is solid.
You may be hard to slide on a TZ type Grip.
Also making
is solid.
View detail
It attached to SRX250. This price is inexpensive! It is easy to grasp. The pattern of just right softness and a skid also thinks that it is good for a sports run. Although durability is not known, it is cheap!
It attached to SRX250.
This price is inexpensive! It is easy to grasp.
The pattern of just right softness and a skid also thinks that it is good for a sports run.
Although durability is not known, it is cheap!
View detail
With handle exchange, grips were exchanged. The conditions of a grip can be firmly gripped, where a glove is carried out. It seems that the thinnest possible thing suits me with a small hand although some were tried. Although it just said that
With handle exchange, grips were exchanged.
The conditions of a grip can be firmly gripped, where a glove is carried out.
It seems that the thinnest possible thing suits me with a small hand although some were tried.
Although it just said that it was not too bad in design, since the hand was just always going to carry out, the practical use side was thought as important.
the function as a grip is perfect -- it is .
View detail
The point that the price is held down at a low price can be evaluated. The parting line considered that it can do in the manufacturing process of parts although the simplicity which the design is not made strangely was pleasing (I think that it is a j
The point that the price is held down at a low price can be evaluated.
The parting line considered that it can do in the manufacturing process of parts although the simplicity which the design is not made strangely was pleasing (I think that it is a joint of a die) is conspicuous too much.
Since I think that it is too many conspicuous just because it is simple, I regret.
View detail