Reviews
It was a great help.
I had never thought of such a product until now.
Good, good~!
View detail
It goes up very lightly.
We are z900RS.
I had wanted a maintenance stand for a long time, but I also thought that a center stand would be fine, but I wanted to install a YOSHIMURAHand Bent, so I gave up on the center stand and decided on the maintenance stand.
Impressively, I was surprised at how lightly it went up.
Probably light enough to be raised by a Small school age girl. I was surprised.
As I have written elsewhere for those who use YOSHIMURA, please use a bracket with the opposite shape of a normal bracket for the old-fashioned YOSHIMURAHand Bent, since a normal bracket will scratch it.
What is the opposite of normal, on the Maintenance Stand side, [Ts] You can install a Bracket like the one shown below, but you can also use the Material:Plastic round shape circular fixtures.
[Ts] Brackets like the one shown below are brackets that can be attached to the body of the vehicle.
I have always wondered if there might be a reason why only YOSHIMURAHand Bent's Exhaust System is parallel to the ground.
It's still different, isn't it? It's originally for re−sing!
View detail
Easy maintenance of front wheels
I used it to clean the front wheel and brake disc. The rotation was more sluggish than I expected, but after lubricating the roller bearings, they turned smoothly. It is very good because I don't have to move my heavy motorcycle around. View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1100
Service manual and quantity when maintaining your car:It is a must-have for Set!
[How is it used?
I purchased it as a must-have item along with the Service Manual for maintenance of my CB1100, which I want to ride for a long time after its production ends.
Was the one you received as per Image?
The color of the cover is different, but the contents are the same. There seems to be a slight difference in minor changesetc. depending on the number of editions.
How was your experience with it?
It is helpful that all Parts are listed in detail.
You can also browse the web version for free, but it doesn't even list prices, so PaperBase is a better reference because it also shows prices.
[Points to note]
In addition to the unbranded CB1100, EX, and RS, there are a surprising number of other models with different model numbers, so make sure you buy the right one.
How did it compare to other products?
I can't compare it because it is the one and only List, but I think it is easier to read than the web number.
▼ The price revisions will change the description, but let's look at that with Large eyes, thinking that we have confirmed the history of our car.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL
"Basic" is packed!
This book contains all the basics of how to handle each part of the Ninja 250SL, including how to set the rear suspension and how to ride the Ninja 250SL. This book is a must-read, as it contains much more information than you can imagine! You will fall in love with Ninja 250SL more and more after reading this book! Please read it! View detail
It's a must if you want to maintain it.
I purchased this product to replace Handlebar.
Since I am still planning to replace the exhaust pipe and do some brake maintenance, I thought it was essential if I want to play around with it, as it provides necessary information such as tightening torque and assembly order.
View detail
Fits: HONDA CR250R, HONDA CR125R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TE125-501, HUSQVARNA TX125
Convenient and lightweight! But low strength
Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft.
View detail
Purchased for 23CRF250L
Purchased for CRF250L.
The minimum ground clearance is low because it is a non-S model, and also because it uses ACERBIS skid plates.
It does not fit under the Engine as it is.
I have to pull the vehicle up to get the STAND in, and when I lower it down, the STAND is stuck.
I would appreciate it if you could lower it a bit more.
I use STAND after putting the front and rear Tire on the Block because it is inconvenient.
If not for this, it would be a perfect score, but I originally had the same impresion for use on a CRF250L
I purchased at my own risk and have no problems.
View detail
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
Should be replaced promptly when old.
The company's Maintenance Stand, which has been used for many years.
The rubber at the tip of the V-receptacle also deteriorates as it is exposed to the wind and rain over the years.
Repeated use of the product in a battered or detached state can lead to damage to the vehicle, so it is best not to be stingy and replace the product when it is cracked or comes off easily.
When you replace the product with a new one, you will still notice the difference in quality from the deteriorated product, and this alone will somehow restore a sense of security.
It's just a tip rubber, but it's a tip rubber.
It is a good idea to replace it promptly without being stingy in order to protect your car.
View detail
Required by Maintenance/Circuit.
If you do your own maintenance, you will need to do it,
I think the longer one can hang STAND with lighter force.
The construction is solid and secure.
I think it will last a long time. It's a little expensive, but...
View detail
Easy to use
I purchased this for Chain Maintenance and recommend it for vehicles without a Center Stand. View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
For stabilizing the vehicle body during operation
When working by suspending the car body with j-trip's Suspended Frame Stand, etc.
Purchased to stabilize the vehicle
Not originally intended for use, but safe to have
View detail
Challenge to recombine Rim
[How is it used?
The front wheel of the GasGas EC250 2023, which I always use for forest road touring, has become distorted and swung large, so I replaced it with a new rim. I used this Gyro Stand to build the Spoke.
How was your experience with it?
I worked with DirtFreak's You Tube as a reference while taking a swing.
It took us about two hours and we were able to correct the flare there.
The ride felt completely comfortable and I was able to replace the Rim without any problems.
The Off-road Wheels are easily distorted when used,
I felt it was important to correct Wheel distortions from time to time.
I am glad I bought the Gyro Stand and tried it myself.
View detail
Fits: HONDA SUPER CUB, HONDA CROSSCUB110, HONDA SUPER CUBPRO
A must-have if you do your own maintenance
I bought the CUB110 for my commuter issue because I replaced it with a JA59 model and thought I would need it if I was going to do my own maintenance.
It is also useful for those who want to do routine maintenance and light servicing, such as replacing oil, grease, and consumables, but not necessarily the same work as the mechanics at a motorcycle shop.
Chart, which estimates the failure point from the situation, and Torque, which specifies various bolt types, are pages that should be properly kept in mind.
It may be very expensive when considered as a single book, but thanks to this, if you do the maintenance yourself, you will get that money right back because you will also float the labor cost.
Also, these service manuals can be sold for a high price later on at auctions such as Yahoo! We've recovered the full amount. What a surprise!
The recent Honda service manuals are not increased when the manufacturer runs out of the printed version, and a copy of the simple-bound version is available. (but the price is the same) It is a good idea to buy it quickly before that happens.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL
Maintenance essentials
I purchased this machine for machine maintenance.
Recently, though, there has been a lot of downloading,
The paper medium is easy to read and use.
You can learn a lot just by reading.
I have each Manufacturer, but each Manufacturer is different.
It's interesting.
It can be used from beginner to PRO.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
just right
The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size.
View detail
This makes it easier
The company's LongRear stand and Quantity:I used a set and was able to lift up with ease. I guess I could substitute a stronger Rubber Band or string, but for 500 yen, I would be willing to buy it. View detail
Helpful Rubber and Quantity:Set
Helpful Rubber and Quantity:I used it in a Set and was able to Lift up in one shot even though it was my first time.
I feel that it is expensive and well made.
I was surprised that the shipping box was quite Large.
View detail
The latest issue of RIDEX, volume 21.
You can still go and read, RIDEX Volume 21.
This time Motorcycle appeared in,
GB350, CROSS CUB, XSR900, DAX125, FZr750, HAWK11, etc,
Following on from volume 20, this volume also features many new Motorcycles,
Genre was also very easy to read as it was evenly drawn.
I personally like the design of HAWK11 on the cover picture,
I am satisfied with Motorcycle's color Illustration collection!
The same is true of REBEL's SEdition,
Short Cowl is Standard Equipment is Cool, isn't it?
View detail