Reviews
Good for those who think it's good.
I did this as the inside of the Meter was getting swollen, but if you like the OEM look (the old look), I would not do the Recommendation. It will look and feel new.
It is better to have the Double-sided Tape on the back from the beginning to avoid any hassle.
View detail
It is not difficult, especially if an attached instruction manual is seen although it is about attachment. The tool used the hexagon head of 4 mm for removal of a wrench (8 mm and 10 mm) and a screen. Although it had become a form which is stuck o
It is not difficult, especially if an attached instruction manual is seen although it is about attachment.
The tool used the hexagon head of 4 mm for removal of a wrench (8 mm and 10 mm) and a screen.
Although it had become a form which is stuck on the meter surface, since it is firmly attached with attached double-stick tape and an indicator interferes, it does not become precocious.
Although a mistake is made in the electrotap attachment for power sources and it has stopped having lit up on the next day, when you made it stuck by pressure firmly, it functioned satisfactorily.
It will become glad when appearance also gets on with a skillful light at night unlike pure orange.
View detail
ODAX ODAX El Meter Panel
The OEM bulbs were very hard to see and I was not happy with the night time driving. After changing to the ODAXELMeter, night driving became much more enjoyable. View detail
ODAXELMeter
It would be better if there was an ELMeter with various patterns.
The installation itself is not so difficult, but you have to be very careful with the Meter needle, otherwise the needle will break.
View detail
If you don't run at night with Tunnel, you don't need it at all.
Well, it's expensive. It's relatively easy to install for some people if they have the tools.
I'm sure you can, but you'll have to be creative.
I don't have a lot of impressions, so I'll add that I didn't notice the dirt and dust unexpectedly.
Small Garbage may be in the Meter after installation.
It's too much trouble to remove it every time, so it's still there.
The stronger one = me. This can be a prime cause of Large failure.
I can't help but get frustrated.
The installation is generally said to be easy, but you can use Leutor to break the shell and specific parts.
I have to cut it down, etc.
If you are really unsure, it is safer to ask Shop.
I will describe the Case I fear.
Drop the Screw = The Screw itself is inexpensive, but finding it is Large strange.
Same diameter, Pitch, same length Actually, there are not too many cases (in HS etc.)
The location of the Inverter looks easy enough to describe, but the Clearance
Not quite Tight
Double-sided tape for Switch installation will peel off if it is not strong enough.
=You can't know how strong it is until you buy more than once and see for yourself.
I have five different types of double-sided tape, each with different strengths, and I use them all in my experience.
The reason is that you can't understand any strength until you use it.
If you want to install it by yourself, you can do it by yourself.
I'm sure you can think of something, but I hope you don't take my word for it!
Finally, some Case failures such as licking when using inexpensive tools
I wouldn't be opposed to using this as an opportunity to get some solid tools and do it yourself.
Using a Large Torque does not mean an expensive tool!
Because you are using a small Torque, you need to use a reliable tool!
I digress. The tool is expensive because it's crappy.
It means that a tool in a 100 yen shop is enough for a skilled person.
The following is an approximate list of labor costs for installing this product
If it takes time for removal such as Full Cowl, the labor charge is more than 1h (8000yen + consumption tax)
If it is a Naked type, it would be about that Gold amount if this is the case.
It depends on the mechanic who installs it, and the shop's policy.
In my experience, if you're going to outsource, it's essential to tighten up, and absolutely any good shop will do.
Be sure to check it out after you ride it later!
Other people are just other people. You have to protect your own life.
I assure you that you are incredibly untrustworthy.
It's any motorcycle shop in the world!
View detail
Meters - easy to read (daytime)
Daylight recognition is better, and Design is good
At night, the panel is good, but the ZrX1200 DAEG Meter - is a transparent type The numbers are hard to read because the needle is still in the
Lately the Inverters have been producing a noise like sound
View detail
It's a nice change of pace
I bought this panel because I wanted a white meter panel The installation accuracy is good and the Instruction Manual has detailed instructions for taking out the power supply It was very polite
This is an area that is usually visible, so the level of self-sufficiency is quite high
The brightest setting is so bright that it's almost dazzling
I had a sale for OEM parts, so the meter cover is a different year I'm also changing from Plating to Black
View detail
Feelings are different dimensions Racer.
XJR1300 / It is equipped with RP 03J.
Because the car body is blue,
Natural color development is also Blue selection.
Even at the time of purchase, expectation was there as it was,
In reality when you see nighttime light emission,
I feel relaxed at once..
The trouble of mounting,
Since it extends completely to the light valve,
I felt a little thought.
But it is a satisfaction recommendation exceeding that.
View detail
After all it was good
My Meter is Black, it was difficult to see it dark in the daytime, but I replaced it with this Meter and it was the correct answer.
It is always what you see, it is bright with White Meter and the night is beautiful.
Although the brightness adjustment is attached, it is hard to see dark except the brightest Large, and once it adjusts it will not touch so much so it can not be helped.
Adjust brightness and switch, but we do not seem to be Waterproof so consider where you do not spend much water on car wash.
For installation, it is difficult and delicate parts, we recommend installing with Shop as much as possible.
I am satisfied, but the brightness adjustment is not enough, ☆ I will make it 4 pieces.
View detail
SEA BASS It is charmed by the character of the GSX1300R HAYABUSA of the center of a GSX1300R-HAYABUSA (2002) Meter, and purchases. taking a Cowl into pieces, and Meter outside carrying out, and wiring, although attachment was performed as
SEA BASS It is charmed by the character of the GSX1300R HAYABUSA of the center of a GSX1300R-HAYABUSA (2002)
Meter, and purchases.
taking a Cowl into pieces, and Meter outside carrying out, and wiring, although
attachment was performed as the description -- etc. -- although it came out very well very much and carried out, especially, there is also no unknown place and it has attached.
So that too much brightness understands bright one also in the daytime for after
attachment.
When it was night, it shone more, and it was visible and very satisfactory.
It is, so that there is no telling whether to be having shone even if the quantity of light's merely decreases from the year forge fire in the second half of attachment, and it makes a Volume into the maximum in case of daytime at the present about one year after ... (OK night)
Since it is the fate of
(it parks in the state of beam with outdoors and Motorcycle-cover picking)
EL, it is unavoidable, but I want you to do my best to a slight degree.
If you sell only EL Meter portion individually, I am glad again.
View detail
Although attachment was completed by itself, it attached by the method of inserting in without removing the needle of a Meter. It is said that a Motor will break if it does not do quite carefully. It is not so difficult at . They are
Although attachment was completed by itself, it attached by the method of inserting in without removing the needle of a Meter.
It is said that a Motor will break if it does not do quite carefully.
It is not so difficult at
.
They are
working hours and about 1 hour and a half.
View detail
Ninja250R (09 models) was equipped. He was surprised although it was so bright that it could use even if it extracted the quantity of light most at night. If it cares for treating adjusting the quantity of light in daytime and night, or avoiding d
Ninja250R (09 models) was equipped.
He was surprised although it was so bright that it could use even if it extracted the quantity of light most at night.
If it cares for treating adjusting the quantity of light in daytime and night, or avoiding direct sunlight etc. for a while, considerable durability should be carried out from a catalogue value.
Although already run 30000 km or more from exchange, the brightness which can still be used is maintained.
Since the attachment itself is quite troublesome, it may be good to ask a store.
View detail
To the meter panel of HAYABUSA, a 300-km/h display thought necessity, and purchased to it (06 [ 280-km/h ] is displayed). A 300-km/h display is different according to the mood of the moment. Visibility is good, and if night comes, a display will l
To the meter panel of HAYABUSA, a 300-km/h display thought necessity, and purchased to it (06 [ 280-km/h ] is displayed).
A 300-km/h display is different according to the mood of the moment.
Visibility is good, and if night comes, a display will loom, and a white panel is very beautiful, and legible.
The volume of lightness adjustment is also attached.
Since the work in which recommend custom-made removes cowls at the time of attachment is troublesome, they are four stars.
View detail
Since the visibility of night was not quite satisfactory, the meter of normal is purchased. The hole of the ABS lamp was made and attached at the time of attachment for ABS riding. After attachment became legible perfectly night also.
Since the visibility of night was not quite satisfactory, the meter of normal is purchased.
The hole of the ABS lamp was made and attached at the time of attachment for ABS riding.
After attachment became legible perfectly night also.
View detail
It is attachment to CB400SF Revo. If how to attach works carefully, anyone can do, but I think that the problem is management and power-source picking of wiring. If it is Ho who removes a meter valve, it is also easy to miss wiring using the hole,
It is attachment to CB400SF Revo.
If how to attach works carefully, anyone can do, but I think that the problem is management and power-source picking of wiring.
If it is Ho who removes a meter valve, it is also easy to miss wiring using the hole, but in that case, if it is, the back light of a liquid crystal display will be lost and it will disappear at night.
Then, flat LED (white) of the emon currently treated in the car accessory store etc. was installed with double-stick tape in the meter, where two pieces and a cover are removed.
A crystalline liquid becomes a white and becomes a cooler impression.
Next, although it is a power source, the wiring color and the wiring color of CB400Revo which are written to the operation manual differ from each other! Although it is written that it wires again using a clip,
wiring will be damaged, and since removal of the inverter for back lights cannot be performed when maintenance of a meter is needed in the future, work with large-scale measure may be needed by the installation method.
Then, that it is a recommend is the method of using the socket power source for LED (for T10 wedge sockets) of an emon, and taking a power source from a meter valve socket.
It is safe, even if wiring is not damaged, either, but separation with an inverter becomes easy using a connector and the double-stick tape which is a meter in the future comes as HETA, if it is this!! It uses with two objects for crystalline-liquid back lights in all.
Although it is a back supplement, since the meter needle is white and a run of daytime becomes hard to see a little when it is CB400, let's consider returning to a pure meter behind and paint.
(I painted with the orange safely by the touch up pen.) EL backlight is still very weaker to ultraviolet rays! Let's protect using wax which can carry out UV cut, such as Plexus.
It may be better to devise so that it may not hit direct sunlight, also when parking.
Although it was finally comment, the circumference of a meter became a sharp... The rest is WAKARIMASEN orz.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
mono-[ optical ] -- without the attachment which is the parts currently aimed at as liking (smile) being also so difficult, although the description had just few photographs, when reading purport of a letter firmly, it was not mistaken. Even so, cool!
mono-[ optical ] -- without the attachment which is the parts currently aimed at as liking (smile) being also so difficult, although the description had just few photographs, when reading purport of a letter firmly, it was not mistaken.
Even so, cool! Although the design of the instrument panel was also pleasing and the hayabusa bought it, it further took to it (smile). As well as night, since daytime is also a white panel, compared with a pure black panel, the circumference of a meter is advertized considerably.
Only one point.
Since he thinks that water proof processing is not carried out although it considered placing a controller near a meter, it is slightly uneasy ...
I think that installation of the circumference of a meter and a handle surely increases since he would like to adjust illuminance by a hand.
They were five stars when it was before the measure against water proof.
View detail
It yearns after a white meter, and if the meter which finished purchase in about 1 hour although decision attachment was a little troublesome can be removed, I will think that attachment is also very easy. Careful cautions are merely required only for
It yearns after a white meter, and if the meter which finished purchase in about 1 hour although decision attachment was a little troublesome can be removed, I will think that attachment is also very easy.
Careful cautions are merely required only for the place of the indicator of a meter.
A meter shines very skillfully and running at night becomes pleasure.
It is very beautiful when shining in that it is a white meter or a tunnel daytime also.
View detail
The comment after attachment change feeling dramatically this time. He has a feeling which is on the motorcycle which is different since it is a portion which always goes into a visual field. I think that attachment is also very easy. Careful
The comment after attachment change feeling dramatically this time.
He has a feeling which is on the motorcycle which is different since it is a portion which always goes into a visual field.
I think that attachment is also very easy.
Careful cautions are merely required only for the place of the indicator of a meter.
Awkward I was also able to do it.
View detail