Reviews
Good for those who think it's good.
I did this as the inside of the Meter was getting swollen, but if you like the OEM look (the old look), I would not do the Recommendation. It will look and feel new.
It is better to have the Double-sided Tape on the back from the beginning to avoid any hassle.
View detail
Odax meter
Nice to have more kmh..unlocked the speed cut..but the instructions on japan..it could be easy in english..a very good product..thanksAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together: Difficulty of installation: use of youtubers search for odax el meter for kawadaeg Cost performance and comparison with other products: only this found on the web About shipping and packaging: nice packaging very secure.. Any concerns, cautions, or advice when purchasing: trusted seller View detail
It makes a different impression.
The instruction manual is very thorough. I am a little worried about the wiring. I'm worried about the durability of the UV light. View detail
It is not difficult, especially if an attached instruction manual is seen although it is about attachment. The tool used the hexagon head of 4 mm for removal of a wrench (8 mm and 10 mm) and a screen. Although it had become a form which is stuck o
It is not difficult, especially if an attached instruction manual is seen although it is about attachment.
The tool used the hexagon head of 4 mm for removal of a wrench (8 mm and 10 mm) and a screen.
Although it had become a form which is stuck on the meter surface, since it is firmly attached with attached double-stick tape and an indicator interferes, it does not become precocious.
Although a mistake is made in the electrotap attachment for power sources and it has stopped having lit up on the next day, when you made it stuck by pressure firmly, it functioned satisfactorily.
It will become glad when appearance also gets on with a skillful light at night unlike pure orange.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Time-tested items of the circumference of a meter known only to insiders: EL meter. There must also be many people fascinated with that beauty that shines dubiously .. EL is a wonderful thing which will emit light if it says simply that some are r
Time-tested items of the circumference of a meter known only to insiders: EL meter.
There must also be many people fascinated with that beauty that shines dubiously ..
EL is a wonderful thing which will emit light if it says simply that some are really called ? and voltage will be applied.
They are high technology parts which shine skillfully with little electric power and are used also for the mobile phone or the liquid crystal display.
EL meter of this odax is based on an electroluminescence sheet, and is a type stuck on a normal meter.
It may be better to ask the motorcycle store for the more awkward one, since a hang needs [ remove / the needle of a meter ] attachment a little first as it is stuck on a meter.
thought measure with sufficient taking a power source from wiring of a position lamp.
Since there is a luminescent pattern, blue and green, of 2 colors and illuminance can be adjusted as a big feature of this product, a color can be adjusted to oneself liking.
It shines skillfully and preeminent for an attention degree night! A meter can be read clearly.
A 300-km/h display will be made to dance the heart in the direction of peregrine falcon riding above all.
The variation of a meter panel is abundant and it also tickles an owner at the heart that there are goods in which the logo of the vehicle type is contained depending on the meter.
Although it was formerly only a lineup of super sports, a naked type also appears these days.
The variation of a vehicle type is also abundant.
Keep in mind that durability and a life are also satisfactory, and it will lead to decline of the quantity of light, and the fall of a life if it exposes to direct sunlight directly although the brightness can be enjoyed long.
View detail
Inferiority as a product
Purchase→installation→check→light→water temperature gauge not lighted at 2nd run
Because it is disconnected when it removes it, when it applied for it by the guarantee object, the wiring handling here is bad, and when it runs
The warranty does not cover the answer that it may have been cut by vibration. The answer is dumb, but the product is also inferior. Chinese products are still better.
In addition, I was told that they do not sell Single Item, so I was asked to buy 4 for Repair for 9,50 Yen.
View detail
ODAX ODAX El Meter Panel
The OEM bulbs were very hard to see and I was not happy with the night time driving. After changing to the ODAXELMeter, night driving became much more enjoyable. View detail
visually satisfied with the appearance of
Installation is not that difficult.
When painting the meter cover.
I installed them together.
It's very beautiful and easy to see when I'm running at night.
View detail
The meter area will be gorgeous.
OEMMeter is tasteless, so I replaced it with ELMeter.
It works better at night than during the day, but I don't ride at night.
When you go through Tunnel is when you're most happy.
View detail
Cockpitization of Yaruki
If you don't know how to use it, go to the shop and do it.
Visibility at night has been especially improved?
I can change from Blue to Green Light with one Switch, but Blue is easier to see.
View detail
ODAXELMeter
It would be better if there was an ELMeter with various patterns.
The installation itself is not so difficult, but you have to be very careful with the Meter needle, otherwise the needle will break.
View detail
If you don't run at night with Tunnel, you don't need it at all.
Well, it's expensive. It's relatively easy to install for some people if they have the tools.
I'm sure you can, but you'll have to be creative.
I don't have a lot of impressions, so I'll add that I didn't notice the dirt and dust unexpectedly.
Small Garbage may be in the Meter after installation.
It's too much trouble to remove it every time, so it's still there.
The stronger one = me. This can be a prime cause of Large failure.
I can't help but get frustrated.
The installation is generally said to be easy, but you can use Leutor to break the shell and specific parts.
I have to cut it down, etc.
If you are really unsure, it is safer to ask Shop.
I will describe the Case I fear.
Drop the Screw = The Screw itself is inexpensive, but finding it is Large strange.
Same diameter, Pitch, same length Actually, there are not too many cases (in HS etc.)
The location of the Inverter looks easy enough to describe, but the Clearance
Not quite Tight
Double-sided tape for Switch installation will peel off if it is not strong enough.
=You can't know how strong it is until you buy more than once and see for yourself.
I have five different types of double-sided tape, each with different strengths, and I use them all in my experience.
The reason is that you can't understand any strength until you use it.
If you want to install it by yourself, you can do it by yourself.
I'm sure you can think of something, but I hope you don't take my word for it!
Finally, some Case failures such as licking when using inexpensive tools
I wouldn't be opposed to using this as an opportunity to get some solid tools and do it yourself.
Using a Large Torque does not mean an expensive tool!
Because you are using a small Torque, you need to use a reliable tool!
I digress. The tool is expensive because it's crappy.
It means that a tool in a 100 yen shop is enough for a skilled person.
The following is an approximate list of labor costs for installing this product
If it takes time for removal such as Full Cowl, the labor charge is more than 1h (8000yen + consumption tax)
If it is a Naked type, it would be about that Gold amount if this is the case.
It depends on the mechanic who installs it, and the shop's policy.
In my experience, if you're going to outsource, it's essential to tighten up, and absolutely any good shop will do.
Be sure to check it out after you ride it later!
Other people are just other people. You have to protect your own life.
I assure you that you are incredibly untrustworthy.
It's any motorcycle shop in the world!
View detail
Highly satisfactory.
It is quite satisfactory to change it because it is the place where it enters eyes. The brightness can be changed, and the color of Back light can be changed, too. Because it is OLED, ultraviolet rays are prohibited. View detail
awful
I bought it and had it installed at my favorite motorcycle shop, but after about two months. Meter no longer glows.
I had a motorcycle shop look at the cause of the problem and it seems to be energized. There seems to be a problem with the Body.
Can't you do something about it?
View detail
Meters - easy to read (daytime)
Daylight recognition is better, and Design is good
At night, the panel is good, but the ZrX1200 DAEG Meter - is a transparent type The numbers are hard to read because the needle is still in the
Lately the Inverters have been producing a noise like sound
View detail
It's a nice change of pace
I bought this panel because I wanted a white meter panel The installation accuracy is good and the Instruction Manual has detailed instructions for taking out the power supply It was very polite
This is an area that is usually visible, so the level of self-sufficiency is quite high
The brightest setting is so bright that it's almost dazzling
I had a sale for OEM parts, so the meter cover is a different year I'm also changing from Plating to Black
View detail
Garbage ? ? ? Wonder?
Proceed work according to the Instruction Manual, installation completed without problems.
Confirm lit.
After 2 days, Gasoline meter not lit ? ? ?
Inverter No abnormality.
If you open the Meter again and check it, it is confirmed that the flow line of the EL and the contact portion of the electrode are defective.
After that, a water temperature gauge, Speedometer and then unlit.
What is it supposed to do?.
View detail
good
I wanted to customize around Handlebar, so if I was looking for Meter's Custom that was the most visible first, I found ODAX's El Meter Panel ??
Purchased this item because it was a product that just pasted and was OK.
Paste the double-sided tape between OEMMeter and just connect Wiring.
(important point)
Double-sided Tape is sure to use a thin Type ??
In the case of me, the thickness of the first thick double-sided tape was pasted, and it interfered with the Meter needle. "Meter broke (? д ?) ??" I thought it well and well researched, it was the cause.
Everyone please note.
Since Base is White, it is a product that tickles the Biker heart with beautiful daytime visibility UP, and beautiful Blue of ELLight at night.
View detail
Large I am satisfied with satisfaction !?
A new design has appeared, but I tried installing it because I liked this design. Panel itself was softer than I thought it was easy to put through the needle.
Where to take a moment, I struggled with the final positioning when pasting Double-sided Tape on the back, so I thought it was okay to open the gap and shorten the Tape. Sure enough, the position of the round hole in the center has gaped a little to Right. I am going to fix it in a strange place and I will scoop up again after a week (Lol) I got dark and saw Meter, I got a little bit busy. Controller of dimming think that Space under Kawasaki Emblem fit perfectly and it is perfectly refreshing. The Instruction Manual was kind and Wiring was easy.
View detail
Feelings are different dimensions Racer.
XJR1300 / It is equipped with RP 03J.
Because the car body is blue,
Natural color development is also Blue selection.
Even at the time of purchase, expectation was there as it was,
In reality when you see nighttime light emission,
I feel relaxed at once..
The trouble of mounting,
Since it extends completely to the light valve,
I felt a little thought.
But it is a satisfaction recommendation exceeding that.
View detail