Reviews
It's a lot faster to work with.
Purchased for a Caliper replacement.
I used to use a Syringe to bleed air and change fluids, but it was hard to use.
I found this one that a Motorcycle shop near me was using and bought it.
Like others have said in their imprints, the Tube is hard and it has Habit on it.
I bought about 2m of silicon tube at Home center and installed it.
I managed to do Fluid filling by myself, but I regret that I should have bought a check valve too.
I'm very happy with it, it's very convenient and the work is done quickly.
TIPS I always do about Breeder air intake in other imprints.
If you wrap more seal tape around the screw of the Breeder and stop it in the middle, it will not suck air.
When the work is finished and the Breeder is tightened, ignore the Seal tape and tighten it to the end.
After spraying water to clean, tear off the protruding part of the Seal tape at the end.
While the Bleeder Bolt is wrapped with Seal tape, another Bleeder Bolt can be inserted or
Don't worry about it, Fluid needs to be left flowing or something, but no particular problems so far.
View detail
The Attachment part of the Breeder looks like it's going to suck air
The Attachment of the Black Rubber to the Breeder has a Fit feeling to it I doubt it I think it would be more reliable to remove it and use it with a tube + thin Tie Wrap
If you have to replace a whole brake line, you can't have this product through the Fluid It was easy to
View detail
This set alone is not enough
I thought.
Even if applying a negative pressure with a bending angle Pump since it does not fit in the attached Breeder installation Parts
I will take in air from the gap between Breeder and Joint.
Since it can not be helped, purchase a small Silicon tube one size at home center
I used it for Joint between the attached Hose and Breeder.
View detail
There is nothing different from Large.
I will be looking forward to using this troublesome Fluid exchange. The amount of Fluid that I will eventually get out when I exchange it has also drastically decreased. It is the only disadvantage that Hose to use has a curvature hanging when stored and there is no stability feeling. View detail
It is easy to use.
When I was doing Byte at the service station I was exchanging four wheels of Brake fluid so I was able to go to Smooth surprisingly. Product itself is cheesy, but easy to use. Since the Adapter could not be installed on the Front side, I connected the transparent Hose directly and exchanged the Fluid.
Although it is a replacement for the second year, because of deterioration, the color was brown and discolored.
View detail
[Webike Monitor] It purchased in order to exchange by itself. [ ] since the Japanese description is also attached difficultly [ work ] -- -- it is recommended also in the direction which thinks will carry out Brake-fluid exchange for the fir
[Webike Monitor] It purchased in order to exchange by itself. [
]
since the Japanese description is also attached difficultly [
work ] --
-- it is recommended also in the direction which thinks will carry out Brake-fluid exchange for the first time.
Although
we had also left it to Schopp until now, as soon as it did by itself and cooked,
purchase of was done.
The Maintenance of the
Motorcycle is likely to become increasingly pleasant.
Since it is somewhat expensive, I will merely consider it as the * Minus 1.
View detail
Although Air omission was carried out using the injector, the Air of Caliper Master cylinder of brembo does not fall out easily! Although this product was purchased there, Since vacuum state is made with a Vacuum pump, Air omission is e
Although Air omission was carried out using the injector, the Air of
Caliper Master cylinder of brembo does not fall out easily!
Although this product was purchased there,
Since
vacuum state is made with a Vacuum pump, Air omission is extremely early!
working efficiency increases markedly.
View detail
It was used when changing a brake master and a brake line. Until now, although NIGINIGI [ the brake lever ] desperately, this was used, or it became and became easy. Although I worked alone, time reduction was able to be carried out considerably.
It was used when changing a brake master and a brake line.
Until now, although NIGINIGI [ the brake lever ] desperately, this was used, or it became and became easy.
Although I worked alone, time reduction was able to be carried out considerably.
We recommend it to those who do brake maintenance by themselves.
View detail