Reviews
Fits: YAMAHA MT-09, YAMAHA YZF-R1M, YAMAHA YZF-R6, HONDA CBR1000RR, HONDA CBR600RR, HONDA HORNET600, YAMAHA FZ-6N, YAMAHA FZ6-S FAZER, YAMAHA FZ-8, YAMAHA FZ-8 FAZER8, YAMAHA MT-07, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, HONDA CBR600RR, HONDA CBR1000RR
Clutch lever
Clutch lever, the picture and the Cinnamo's are different. View detail
Quantity:Purchase with Set
Brake lever and Quantity:I bought it as a set
We are satisfied with the adjustability of the system.
In particular, I expect that the Foldable will be effective in avoiding lever damage in the event of a fall.
View detail
Fits: HONDA CRF250L, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
The quintessential ZETA!
We were not satisfied with the OEM's "flimsy" texture, so we chose ZETA's Off-road Lever.
It can obtain a texture that cannot be obtained in NORMAL.
Quantity:Pair (for Left and Right) I had some items, but I was longing for Titaniumium color, so I went for Quantity.:Pair (for Left and Right) Purchased separately.
The construction is also quintessential ZETA, very smooth to the touch with bare hands and comfortable to hold (too bad it's used with Gloves!).
As for the installation, we replaced the OEM hand guard with ZETA's AdventureHand guard at the same time because the OEM hand guard requires modification of the hand guard.
View detail
Puig Short Clutch Lever for Yamaha MT09 Tracer
This is a replacement for the OEM clutch lever that came on the Yamaha MT09 Tracer 2017 model. Nothing really wrong with the OEM but fancied a change of clutch lever. As I have customized a lot on this bike already, this was something I had been meaning to do but could not decide which brand, finally went with Puig as I have never used them before. This lever allows a lot of customization in the way of colouring. I did not go for anything really out there but the good old standard black colour lever and also the black adjuster. Stealthy. I had a few other parts to order so this worked out good for shipping too. The price for this clutch lever was really good but you also have to factor in the adapter you need for it to fit your model of bike. Not particularly expensive even for the 2 parts needed to complete. Webike price was a big plus for me as they always seem to beat other suppiers. Even if you add the cost of the brake lever and the adapter, the price is still better than a lot of the other brands. The package arrived in 5 days as always and everything was very well packed. Although this clutch lever came in it's own box anyway. Nothing was damaged in transit mainly due to Webike packing the spaces with extra bubble wrap Upon opening the box for the clutch lever, I was really impressed with just how good it looked. The finish is a nice smooth glossy black and the adjuster is also the same glossy black. All the anodising was even and no patchy parts at all. Fitted really easily within 30 minutes. I have to say, even though this was a bit of a punt, Puig have knocked this out of the park. The lever is stunning. The feel when fitted is great, not notchy in any position. The adjustment now with this clutch lever is super cool and there is a lot of reach now. Good for small hands and larger hands too. A really nice addition to my bike. Very very pleased, the pictures you see online do not do this lever justice. Thanks Webike. View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Good vibes
It is a little shorter and easier to grip. View detail
Clutch is a little lighter.
Replaced because the adjustment function is not available on the OEMClutch holder.
There are various Manufacturers, but I wanted to change the Lever, so I went with this product.
Clutch is now lighter and more adjustable.
View detail
Fits: Others For SP Mukawa's Clutch Cable, Others Vehicles equipped with SP Mukawa's dry clutch cover, Others Vehicles equipped with SP Takegawa Die Cast Clutch Cover, HONDA XR100 Motard, HONDA XR50 Motard, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA Ape100, HONDA MONKEY R, HONDA Ape100, HONDA Ape50, HONDA Ape50, HONDA MONKEY RT, HONDA Ape50, HONDA MONKEY, HONDA MONKEY BAJA, HONDA 12VGORILLA, HONDA 12VGORILLA, HONDA 12VMONKEY
Is this made by Mukawa?
The hex bolt that fixes to the handlebar could not be tightened by either Socket or Spanner.
lick
Replaced with a hand-held hex Bolt with hole
Very disappointed!
I don't understand why the Holder is Black and the Lever is Silver?
View detail
Fits: HONDA VFR750, HONDA CB1000, HONDA VTR1000SP, HONDA CB1300SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000, HONDA VTR1000F FIRESTORM, HONDA VFR800, HONDA CB1300SB [SUPER BOL D'OR] , HONDA CB1300SB [SUPER BOL D'OR]
ClutchGood for a small change!
Installation complete!
Easy to install!
Operability:The aperture is indeed 20% lighter than the conventional Clutch.
I think the cost aspect is very good for the product performance!
View detail
Fits: HONDA CB1300SF SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB SP
If you are dissatisfied with OEM, RECOMMENDATION!
Even though it is a Small component, BilletAnodized looks much tighter.
I can make fine adjustments and the Lever shape is very good.
Clutch operation is now easier.
Also, the feeling of gripping the device has become lighter, perhaps due to the lever ratio.
For those who feel uncomfortable with OEM, this is a recommendation.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
Improved appearance and feel of operation
Instruction Manual is included, but it is not very detailed, but it is not that difficult.
It looks better and the adjustments can be set more precisely, improving the feel of the operation.
View detail
Fits: KAWASAKI ZXR400, KAWASAKI W800Cafe, KAWASAKI W800, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI KLE250 ANHELO, KAWASAKI EX-4, KAWASAKI ER-6N, KAWASAKI ER-6F, KAWASAKI ESTRELLA(disc car), KAWASAKI ZZR400, KAWASAKI ESTRELLA -RS(disc car), KAWASAKI ESTRELLA -RS(disc car), KAWASAKI ZXR250, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI ZRX-II, KAWASAKI ZRX, KAWASAKI ESTRELLA -RS(disc car), KAWASAKI ESTRELLA -RS LIMITED(disc car)
That's not the picture.
Because it is not a Power lever!
It was just a Chromium Plating product for RepairLever!
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R HiGrade, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14, Others
Nisshin's Radial master.
Installed on a ZrX1200R.
MASTER is Nisshin's Radial.
I am satisfied with the texture and appearance, but there is a little interference with the Passing switch when I hold the Clutch. I am considering modifying the Switch side in the future.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
Lever ratio is 37.5
It was
Purchased to make the clutch on my SV650 run better.
OEM is 34mm.
I bought all kinds of holderetc.
When I contacted NTB, they told me the lever ratio of the relevant car model, but they did not tell me about other car models....
I wonder if there is anywhere that summarizes this.
View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
CB1100rs
It's a very high quality product. It would be the best lever for CB1100rs. I really like it~!!^^ It is fitted just as well as the genuine lever. View detail
Finger Quantity:Recommended for those who pull Clutch with 2pc … but
So far the Clutch operation has been performed with the finger Quantity:I was pulling with 2pc, so when I replaced it with Gail's Wire Clutch Holder, I converted it to Short lever.
Basically, there is no dissatisfaction with the Clutch operation and the finger Quantity:For those who have been pulling in 2pc, this is the best choice with no problems.
However, this time we changed the clutch holder to a variable ratio clutch holder to solve the weight of the clutch by installing an external slipper clutch, and changed the ratio from OEM 34mm to 32mm. The result was that the weight of the clutch was reduced to the original weight.
It is obvious if you think about it calmly, but I wonder if short lever will not break lever even if it falls down... or basic finger Quantity:I thought it would not be a problem since it is a 2pc, but when I ride long distances, such as touring, I feel fatigue accumulating and at the end I was pulling the short lever with three fingers;
Of course, it is ridden on a daily basis and finger Quantity:I have no problem with 2pc people, but I have not been touring for a long time and it was hard for me due to lack of muscle strength from not being able to ride normally, so I have returned to standard lever for now.
I think I will keep it as a Stock until the Standard lever breaks off if it falls over or something.
View detail
I am satisfied
2%er specializing in customizing the SR400
I've been watching it on Instagram, but it's the first time I've ordered parts, and the build quality is great and the delivery is fast.
Willing to order parts again next time. I am very satisfied. They say I have to fill in 100 characters in the review. ------------------------------------- --------------------- 2%custom specializing in SR400 I usually saw it on Instagram, but I ordered the parts, but the build is good and the delivery is fast . I am also willing to order parts next time. Very satisfactory. It is said that the review should be filled with 100 characters .. Powered by Google Translator
View detail
Fits: KAWASAKI ZZR 600, KAWASAKI ZXR 400, KAWASAKI ZX-9R, KAWASAKI ZR 7, KAWASAKI Z750 S, KAWASAKI Z750, KAWASAKI Z 900 RS Cafe, KAWASAKI Z 900 RS, KAWASAKI Z 900 RS, KAWASAKI Z 900, KAWASAKI Z 900, KAWASAKI Z 650, KAWASAKI Z 650, KAWASAKI Z 1000 R, KAWASAKI Z 1000, KAWASAKI W 800, KAWASAKI Vulcan S, KAWASAKI Vulcan S, KAWASAKI Versys 650 ABS, KAWASAKI Versys 650
Mizu clutch 3 finger lever
Lever is not wide enough to get your 4 fingered gloves on it. Pinky slips off all the time. If you only have 3 fingers it would be OK. View detail
Additional purchase for spare parts
I was afraid that I would run out of this product, so I purchased an additional one as a spare.
Comparing with the spare inventory on hand now, I see that the Package has changed and the
The product itself has slightly rounded corners.
I don't think it is a problem as far as strength.
I fell down a couple of times, but I think it was because of the Bush Guard.
It worked for 15 years just because the tip circle was removed.
Operability is usually good.
No problem at all.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-R1000, SUZUKI GSX1300R Hayabusa (Hayabusa), SUZUKI Bandit 1250S
OEM equivalent and cheaper
The feel is almost the same as OEM.
It is good because you can get it at a much lower price.
View detail
Fits: KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZX-12R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI VERSYS1000
I wonder if it's just looks.
I installed it because it looked cool when it was used in the 8 Endurance Machine and so on.
It doesn't have any adjustment mechanism or anything like that, so the feel is the same, and the cutting holes are rather poor to the touch.
Since it is Foldable, it will reduce the Risk of not being able to run on its own.
I am satisfied with the new look.
View detail