Reviews
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CBR600F, HONDA X4, HONDA CBR600RR, HONDA X-11, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB400SF, HONDA CBR600F
The color is similar to Champagne gold, and the cosmetics are good!
[How is it used?
Since I changed the color of the Tank, I wanted to unify it with the same Gold color as the Lever.
Was the one you received as per Image?
There are some machining marks from the manufacturing process, but there are no problems with accuracy, and the color is close to Image, which is perfect.
Was the installation difficult?
It is only a matter of replacing the Normal cap, so it will take less than a minute.
It is safer to use Center Stand for safer replacement because it is Flat and reduces Fluid seepage.
How was your experience with it?
It looks like Parts, so the functionality is the same, but I am satisfied because I wanted to unify with Yellow color and Gold type. I think the colors are an excellent combination with Active's Lever.
[Included Parts:were they on?
Material:A Stainless Steel Hexagon Socket Screw is included, which is modest but much appreciated since a NORMALScrew is not enough to keep your mind off of it.
[Was there anything that disappointed you?
Nothing in particular; there are lineups with the letters HONDA or CB, but I personally don't like them, so I'm happy with Plain.
I have been looking for a master cylinder cap similar to Champagne gold since other manufacturers' gold master cylinder caps have a strong orange color. I was at a loss, and then I found this Titaniumium gold.
I was able to get it at half the price of MORIWAKI, and I am very happy with its cost performance.
View detail
Fits: HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA X4, HONDA X-11, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One)
These are essential parts for the sober-minded!
It's like an introduction to the cutting PARTS of ANTLION that I've always wanted to be a part of. "HONDA" The letter Master cylinder cap is installed.
I had high expectations for antlion because it is a well-known brand that sells high quality products with extremely high cutting precision,
As I expected, the actual product was excellent.
The black anodized treated cut-out master cylinder cap has a finish with slight cutting blade marks on both the front and back, a spec. that will make the hearts of us men who love large industrial products throb with excitement (lol).
Die-casting (cast metal) cannot express this quality, so I am glad I bought it.
It takes only 5 minutes to exchange and the price is reasonable,
I think this is the best buy for those who are just starting out with custom.
I hope my Review is helpful.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA X-11, HONDA CBR600RR, HONDA X4, HONDA CBR600F, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F
Every time I get on the train, my eyes are drawn to it!
Master cylinder cap from antlion was installed.
There are four colors available, and I chose Black this time, although I hesitated between Titaniumium blue and Titaniumium blue because I don't like flashy feeling.
Replacement was an easy task that took only 5 minutes with a Phillips Screwdriver 1 pc and the included Hexagonal Wrench. (Material included in the kit):(Stainless Steel countersunk screws are of the hexagonal hole type, not the + type, so an L-Type Hexagonal Wrench is also included in the product, which is a very kind design.)
What I found when I installed it, 'My own eyes go well. (laugh) It's not so much that they stand out from the side, but that I can't help but notice them (laugh).
The texture is also of excellent cutting precision, as is typical of Antlion,
The finish is typical of Japanese industrial products.
"CB" is not printed as is often the case, but cut, so the letters "Shiningly" and "Shiningly" are not printed.
It is assertive and nice,
I hope my Review is helpful.
View detail
Fits: YAMAHA FZ400, YAMAHA XJR400R, YAMAHA SR400, YAMAHA XJR400, YAMAHA FZS1000 Feather, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA XJR1200, YAMAHA XJR1300
Easy dress-up
Easy to dress-up around the Handlebar
I am somewhat OEM with Screw.
Silver sometimes feels dazzling w the reflection of the sun.
When I blew myself up once before, I almost didn't make it out of a self-destructive accident.
They held out until Limit.
View detail
pimping
It doesn't seem so chancy.
You can use any color and any text you like.
Installation
ScrewQuantity:2pc. Remove Set and replace with current one ScrewQuantity:2pc. Set tighten and you're done.
It is a completely self-serving product.
View detail
For a little Fashion.
Simple and Parenthesis is good.
Tension is increased because the handlebar is always in view around the handlebar.
Installation is Quantity:Pair (for Left and Right) The exchange takes about 10 minutes. Level that anyone can do.
View detail
Fits: YAMAHA FZ400, YAMAHA SR400, YAMAHA FZS1000 FAZER, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR400
self-satisfaction
I bought this for the Handlebar area. The color is Titaniumium blue and I chose YAMAHA for the engraving. The color is Titaniumium blue and I chose YAMAHA for the engraving. I think it is a completely self-satisfied product but I like it because I see it every time I ride. View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CBR600F, HONDA X4, HONDA CBR600RR, HONDA X-11, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB400SF, HONDA CBR600F
It's all about the look, isn't it? LOL.
Parts are expensive for some things, but this product was cheap.
Purchased
I wear a wrist band on my rear.
I thought this was better than a weird, elaborate design.
The Handlebar area is all NORMAL, so it's not too flashy.
It was good that it didn't float.
The OEM is a Plus screw, but it's deteriorated and is on the verge of licking the screw.
I pretty much gave up and did MODE, I'm glad you came around.
View detail
With Logo is good.
I had the same Silver on the ZrX1100 I was riding before, although it was a different Logo. I put it on the ZrX1200 DAEG that I am riding now because it looked pretty good. This time I put it on Quantity:Pair (for Left and Right) I made them both KawasakiLogo, but they look like OEM Option Parts. I'm happy with it. View detail
Fits: HONDA X-11, HONDA CBR600F, HONDA X4, HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600RR, HONDA CBR600F
The best
I was looking for something around the Handlebar, which is black, and I found a product that looked good I found it and bought it
It has a CB stamp on it, so it's good for Parenthesis
View detail
Fits: HONDA X-11, HONDA CBR600F, HONDA X4, HONDA CBR600RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1300 SF, HONDA CB1000 SF (Big One), HONDA CB400SF, HONDA CBR600F
Do you care about looks?
I was worried about the color fading and scratches of Cap of Master Cylinder, and when it is Black of the same color I was looking for something that didn't change for some reason, so I found this product in HONDA with Logo I bought it because I thought it was good for cost I am satisfied with the texture and the large change View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA X-11, HONDA CBR600RR, HONDA X4, HONDA CBR600F, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F
I'm impressed
Cut-out, CB's Logo, but it's casual and stylish, sitting in Seat and smiling I'm done
By all means, enjoy a casual and stylish look
View detail
Well, I'm happy with it
After all, because it is a place to be in the eye, the effect of Custom that finishes in two minutes is Large After I put it on, my depressed commute to work went up a little Tension View detail
Fits: HONDA X-11, HONDA CBR600F, HONDA X4, HONDA CBR600RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1300 SF, HONDA CB1000 SF (Big One), HONDA CB400SF, HONDA CBR600F
It became gaudy!
I fell in the earthquake and purchased only One Side.
The texture of Aluminum Billet is luxurious, letters after Anodized hanging are cool.
You have to be careful, the past color and the color you purchased this time are completely different.
Even with the same Titaniumium gold, it is now dark Gold, the past is a light Champagne gold.
Let's be careful when purchasing only One Side.
I will post it for reference..
The picture is thin gold you purchased in the past.
View detail
Fits: HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA X4, HONDA X-11, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR
It is casually a nice feeling.
Casually, CB Logo is a good feeling.
If Bolt is Black, it is the best.
Easy to exchange, it will be over in a short time.
It was good to purchase.
View detail
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA FZ400, YAMAHA XJR400R, YAMAHA SR400, YAMAHA XJR400, KAWASAKI GPZ900R, KAWASAKI Z750 (water-cooled), KAWASAKI Zephyr X, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI ZRX1100II, YAMAHA FZS1000 Feather, KAWASAKI Zephyr 750RS, YAMAHA XJR1200, YAMAHA XJR1300, KAWASAKI ZRX1100, KAWASAKI Zephyr X, KAWASAKI Zephyr 1100RS
Good looking product
These two lids I purchased did fit perfectly. They also came with new allen screws. Beautiful finish on the black ones I got. View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA X-11, HONDA CBR600RR, HONDA X4, HONDA CBR600F, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F
I was able to Dress-up !!
OEM is nothing wrong,
I get a CB so I bought this and installed it
It's nice feeling.
Handlebar also became fashionable around.
Was good.
View detail
Good feeling?
Mounting Quantity : Pair (for Left and Right) Even if you exchange it, it's just replacing the 4 Bolt removed, so it's easy to install in about 5 minutes?
Although Appeal degree is outstanding! Gold was also good as Image.
View detail
Parenthesis is nice.
I bought it because it is possible to replace OEM Product and it looks good Parenthesis.
As written by others, the engraving characters are also good quality at places where it is easy to enter into sight, I think that it is a COSPa high custom part.
OEM was a plate Bolt in the Plus hole so it seems to lick it when it is removed, but it is also nice that a hexagonal hole for replacement is included.
I just removed the OEMCap and replaced it, I slightly hit it with Praghan because Cap was fixed slightly.
Diaphragm inside is bulging, it seems that sometimes disappears when you leave Cap, so it may be better to buy Spare.
View detail
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA FZ400, YAMAHA XJR400R, YAMAHA SR400, YAMAHA XJR400, KAWASAKI GPZ900R, KAWASAKI Z750 (water-cooled), KAWASAKI Zephyr X, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI ZRX1100II, YAMAHA FZS1000 Feather, KAWASAKI Zephyr 750RS, YAMAHA XJR1200, YAMAHA XJR1300, KAWASAKI ZRX1100, KAWASAKI Zephyr X, KAWASAKI Zephyr 1100RS
One point custom
I attached it to ZrX 1100.
Screw stopping Master cylinder was nailing, so I thought it was a good opportunity and purchased with Clutch side.
I "KAWASAKI" When "ZrX" Buy letters entered.
I think that it is good for One point custom !!
View detail