Reviews
As what is called a Spoon Type of a Tire lever, it is a time-tested product.It is more convenient for there to be two in Tire clearing work.Although there is also a cheap imitation these days [ ], this product is clearly a little superior well [
As what is called a Spoon Type of a Tire lever, it is a time-tested product.It is more convenient for there to be two in Tire clearing work.Although there is also a cheap imitation these days [
], this product is clearly a little superior well [ of tip form (condition of thinness and an R), and Plating finishing ].Although it cannot say truly that he has no Rim protector, it is easy to insert and difficult to give a crack.The Rubber grip of a Lever end is also kind to a hand.Since
die length is 260 mm, it may not go to the reason for calling it omnipotent, but the turn of the 500 mm of last Class may surely come, but general work is managed satisfactorily.
View detail
The Lever of the ordinary Bar type was used until he bought this. a tip being thick, and being hard to insert between rims, or involving in a Tube because of the thickness in case of a usual Type, -- when the worst, it is a crack to a Tube -- there w
The Lever of the ordinary Bar type was used until he bought this.
a tip being thick, and being hard to insert between rims, or involving in a Tube because of the thickness in case of a
usual Type, -- when the worst, it is a crack to a Tube -- there were also things very.
Work became really easy after using
, however this.
Since the tip is thin, it is easy to make it slide in first.
It is easy to grasp
and a Grip, and die length is also right just and it is easy to put in power.
Since it is not necessary to cut a Tube with this price and considering
workability working hours can also be shortened substantially, he buys it and is Satoru Taisho.
When this is used, it is like [ which he would like to use the usual Bar type and is lost ].
It is one of the tools to certainly put on the Garage.
I think again that this price is also more enough as the sense of security of KTC than anything.
View detail
[Webike Monitor] It was used for the tire replacement of the SEROW225 WE. The Tire lever of DRC was also purchased simultaneously and was compared. KTC of the point is thinner and it is easy to put a Lever into a crevice. It felt
[Webike Monitor] It was used for the tire replacement of the
SEROW225 WE.
The Tire lever of
DRC was also purchased simultaneously and was compared.
KTC of the point is thinner and it is easy to put a Lever into a crevice.
It felt so that in a user friendly manner [ the Curve of
point ].
It does not understand, unless it however uses simultaneously and compares.
Since it is use of only after [
] once, it does not understand about durability.
It is better for there to be three Levers as you are written.
View detail
Although Spoon portion is thick although the Tire lever with a Wrench of DRC was used until now, and it was hard to insert, KTC was thin and charge became good large shortening of working hours. It is satisfactory although it is a little expensive.
Although
Spoon portion is thick although the Tire lever with a Wrench of DRC was used until now, and it was hard to insert, KTC was thin and charge became good large shortening of working hours.
It is satisfactory although it is a little expensive.
View detail
It is very easy-to-use. both thinness intensity and die length -- although -- I think that it is the optimal. Although it used having heard reputation with the good-quality item, to be sure, it is the highest. Although desorption of the Tire was do
It is very easy-to-use.
both thinness intensity and die length -- although -- I think that it is the optimal.
Although it used having heard reputation with the
good-quality item, to be sure, it is the highest.
Although desorption of the Tire was done with this 1 and two cylindrical Levers, it was not so efficient and carried out at the
beginning.
When this article was increased to three the other day [
], the Bead could be taken very much in and out of a Smooth, and it became the completion of work immediately.
It is the highest.
Although the amount of money increases just for a moment, we recommend you to arrange these three Levers in the case of Tire desorption, and to face them work.
View detail
It purchased for the tire replacement of a WOLF250. Although it was the first tire replacement, it was able to do well unexpectedly. Although it was the used comment, power was applied easily, and did not bend but was easy-to-use.
It purchased for the tire replacement of a WOLF250.
Although it was the first tire replacement, it was able to do well unexpectedly.
Although it was the used comment, power was applied easily, and did not bend but was easy-to-use.
View detail
It combined with the tire lever of the daytona and purchased. It was thought that a usage feeling did not not much have strange straw honestly. Although this one is somewhat more expensive, brand name cost was thought and it is convinced. Sinc
It combined with the tire lever of the daytona and purchased.
It was thought that a usage feeling did not not much have strange straw honestly.
Although this one is somewhat more expensive, brand name cost was thought and it is convinced.
Since a difference appears in workability very much in 1 and 2, we recommend you to purchase it two, although combination is free.
View detail
It was used, having used together with the lever of the daytona. It can do, if there is even a lever easily although it was the first tire change. Since he did not want to damage to a rim, the rubber board was pulled downward. there are not an
It was used, having used together with the lever of the daytona.
It can do, if there is even a lever easily although it was the first tire change.
Since he did not want to damage to a rim, the rubber board was pulled downward.
there are not any worries about bending etc. -- 笙ェ
View detail
Three kinds of tire levers were prepared by this tire change. One of them is this KTC tire lever 260. Friction with the wheel at the time of exchange did not peel off surface plating treatment, either. Moreover, since the surface is carrying o
Three kinds of tire levers were prepared by this tire change.
One of them is this KTC tire lever 260.
Friction with the wheel at the time of exchange did not peel off surface plating treatment, either.
Moreover, since the surface is carrying out the vine vine, there is an effect of beat wax, and it was easy to do work, and felt.
Although the tip is processed thinly, even the sign of bending is not felt in this work.
A good tool is user-friendly! He admired.
I think that it is a tool I want just the person unfamiliar to a tire change to use.
Although it is a little expensive, tool helps work. He has such a feeling.
View detail
Although tube tires were exchanged using a certain type of tire lever from ancient times, this tire lever was purchased in order to also exchange radials on its own account. As appearance, user-friendliness is completely different and goes into the cr
Although tube tires were exchanged using a certain type of tire lever from ancient times, this tire lever was purchased in order to also exchange radials on its own account.
As appearance, user-friendliness is completely different and goes into the crevice between beads easily.
I think that the probability which damages a rim also becomes suddenly smaller.
It will be because it is KTC Brando that can put power in comfort although a tip is thin.
View detail
Great tyre, Lower sidewall than others giving it more face curve which looks really good. Coming in 2 different sizes I chose the wider ones for both front and back.
Great tyre, Lower sidewall than others giving it more face curve which looks really good. Coming in 2 different sizes I chose the wider ones for both front and back. View detail
Although the cheap article lever was used before, if it is unsatisfactorily hard to separate from a tire and power is applied thoroughly, the lever itself will have bent. Although it is slightly expensive, the thing of KTC requires power easily and ca
Although the cheap article lever was used before, if it is unsatisfactorily hard to separate from a tire and power is applied thoroughly, the lever itself will have bent.
Although it is slightly expensive, the thing of KTC requires power easily and can remove a tire to a smooth.
There are also no what and thing at which it turns, of course.
View detail
Since it suffered troubles although the last tire change was working by the tire lever and slotted screwdriver of the daytona, it purchased this tire lever. Although the form of die length or the point is almost the same as the product made from a day
Since it suffered troubles although the last tire change was working by the tire lever and slotted screwdriver of the daytona, it purchased this tire lever.
Although the form of die length or the point is almost the same as the product made from a daytona, surface plating treatment has that smooth in the direction of this lever.
Since it does not feel rough, it seems to be gentle to a tire.
It will be easy to work if there are two.
View detail
Since the angle of an exhaust air filler hole did not suit, it purchased. It checks each time, before running, since air pressure can also be measured simultaneously, and it is very convenient. Merit that's right although it corrected and was OK n
Since the angle of an exhaust air filler hole did not suit, it purchased.
It checks each time, before running, since air pressure can also be measured simultaneously, and it is very convenient.
Merit that's right although it corrected and was OK now usually, when severe adjustment was carried out, way it used the more precise pneumatic pressure indicator.
View detail
Fits: Others Universal
It is us and 8-inch Zuma and equipped with this tire. Although it was at 3.5J wheel of eco-shop Wang products, it fitted in satisfactorily. Of course, it is a tube reply. a good point or before -- 90/65-8, and a one size -- although small one
It is us and 8-inch Zuma and equipped with this tire.
Although it was at 3.5J wheel of eco-shop Wang products, it fitted in satisfactorily.
Of course, it is a tube reply.
a good point or before -- 90/65-8, and a one size -- although small one was pulled and being worn in feeling, since it was 110/80-8 this time, sense of stability came out.
There is also section width of tire and thick touch is good.
Merit that's right [ grip ]! Is consumption early although there is nothing for the moment [ bad / point ]?
View detail
Fits: Others Universal
It put into alloy wheels be 3.5J. Of course, a tube is also at one clue. although still equipped only, this is likely to be gripped considerably -- I come out and think that you may expect. however, merit [ a grip ] -- I feel that it seems to
It put into alloy wheels be 3.5J.
Of course, a tube is also at one clue.
although still equipped only, this is likely to be gripped considerably -- I come out and think that you may expect.
however, merit [ a grip ] -- I feel that it seems to be early also for a part with that right, and wear.
I would like to run early anyhow.
However, since an outside diameter becomes small, cautions are required.
Depending on the case, setting of a sprocket may be needed.
View detail