Reviews
Double-sided tape in Included Parts:is not enough...
It says that only the double-sided tape in the "Included Parts:" column completes the installation, but this is quite unstable. 。 It would be better to apply additional Double-sided Tape (for strong resin, outdoors) or similar on an individual basis. View detail
Dullness Solution
Rubber is just right because it was tacky. It can be installed by anyone right away. 。 If you think Rubber is lame, by all means. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
complex
I think the quality is good.
However, there will be quite a few options because of the need to combine and come to terms with the surrounding Parts, won't there?
View detail
Good vibes
I was really not satisfied with the OEM rubber cap, so after installing it, I am Large satisfied. View detail
The product quality and finish of the cap cover are good
The product quality and finish of the cap cover are good. The anodizing color is also good. Remove the existing rubber cover and remove the pin Insert the Aella nut cover and insert a new pin into the hole of the cover for easy installation. In the case of genuine pins, the shape of the wheel is deformed when reassembling, so it does not look good, but when using pins from Aella products, I think it can be easily reassembled every time. View detail
My Motorcycle!
At first, I thought that some modification would be required for installation, but it is almost the same as OEMParts!
The work took about 10 minutes One Side, was well packaged, and the items themselves seemed to do a good job.
View detail
Smart and clever axle nut cover Z900RS
Replaces the stock cheap axle nut cover with a part that has style and functionality No need anymore to straighten out cotter pin and replace each time chain needs adjusting Ok slightly pricey but does a great job Happy with the purchase ! View detail
Honda NC750X 2021 Manual Foot Deflector
Please ensure you can remove the screws on both sides when applying. Item is useful to prevent water from splashing onto your shoe. View detail
NC750X 2021 21 RH09-1000001 NC750X 2021 21 RH09-1000001
This Product # is for NCS750X Manual. Easy to install. Just that need to be careful when unscrewing after installation. I left it to heal for 72 hours. So it is now very secure. View detail
Good texture, though fine alignment is necessary.
Material:Since carbon products cannot be bolted on, it is necessary to adjust the position of the tail lamp and modify the position of the holes for the fixed pins. The carbon pattern is beautiful when exposed to sunlight, but it is not noticeable because of its small exposed area (laugh). View detail
Interior can be dress-up.
Simply tucking it around the Instrument panel easily changes its appearance.
It is self-satisfying, but it improves the atmosphere.
Custom parts are ideal for dress-up of the car interior.
View detail
The direction of the weave is different from OEMCarbon lol.
The thickness and strength of this product are outclassing! It is completely dress-up parts! View detail
There is nothing wrong with the product, but ….
It looks better than the bare OEM.
However, I was mistaken, but I thought it was Quantity because it cost more than 6,000 yen.:Pair (for Left and Right) I bought it because I thought it was a good idea.
The price for one Cap and one Split Pin was a cosmetic disappointment.
View detail
Because OEMCover is not cool.
I bought this because the OEM Cover is not good looking, and I was worried about the Rear Axle guard, but at the time of purchase, I was considering an external exhaust system, and there was a possibility that it would interfere with some of the exhaust systems, so I decided to go for the easy way out.
The design is much cooler than OEM. Personally, I think it would have been nice to have a product without the word "Manufacturer" or with a simple design.
Also, the cover itself is reasonably stiff, so I think it will protect the Swing Arm if the fall is just a standing fall.
As others have said, the space between the pins is too narrow to fit easily, and since I didn't have a plastic hammer, I couldn't knock it in, so I widened the pins a bit.
Also, due to the trial and error process, the grooves were scratched quite a bit by the pin, and the pin's clamping side (the side that goes out) was sharp, though not sharp, so it scratched quite deeply.
When I wiped it with Plexus, it became less noticeable, but when I left it as it was, it stood out as Large, so I think I need to be careful when installing it.
View detail
HONDA Honda FootDeflector
This is a Honda OEMOption product.
MTfor Vehicle.
Double-sided tape and screw stopper.
The Cowl mounting screw is used, so there is no modification at all. (Co-tighten)
If the Double-sided Tape part is warmed up and the Cowl part is degreased and installed properly, it will attach securely.
It seems to me that Style takes precedence over wind entrainment effects.
(In Cool)
View detail
Also fits the Z900 , not just the RS.
Bought this for my 2017 Z900. It is not advertised as fitting to the non-RS model but installs perfectly. The rubber sock fitted as standard looks cheap and the throwaway cotter pins are awkward and wasteful to deal with. They had to go, but until now there was no solution. Thanks Aella! The Aella cover is well designed, of xcellent quality and just looks so clean! View detail
SUS441Oil tank protector
Material:Carbon and it looks GOOD!
The long screw for installation was also included, so I think that the screw is short enough to increase the thickness of the installation part, so it is not so easy to install.
On my unit, when I have the Handlebar fully locked in Left, the Fork's Outer seems to be interfering slightly.
View detail
Accessory Case
I don't want to put a large back, so I was looking for a small Accessory Case, and I liked this product and bought it.
It's a very stylish oil tank style and I use it to hold my vehicle inspection certificate.
View detail
You don't have to, but it's definitely cooler if you do.
This is a plate to cover the notch for the indicator on Harley's OEM Meter Bracket. The quality of 31State's powder coat is very bad, some shop wrote, but it was applied beautifully. I'm not sure what to do.
A must-have for the detail-oriented man.
View detail
machining
First of all, I shaved the Seat Inner and Fitting, the inside corner and Rivet hole, and installed the Tail Lamp. The position of the Nut of the Tail Lamp is gapped and it is close to One Side. I cut the rubber bush and tightened it with M10mm Washer so that the light can go into the back. It took 7 months from the product order to the product arrival. View detail