Reviews
![[NISSIN Repair Parts For Master Cylinder] Mirror Holder](https://img.webike-cdn.net/catalogue/daypic140709/36206_1_l_TS.jpg)
Since the Bar handle was used, it purchased. Since the Brake of the Nisshin which shines just from the first can be used, COSPAR is good.
Since the Bar handle was used, it purchased. Since the Brake of the Nisshin which shines just from the first can be used, COSPAR is good. View detail
![[NISSIN Repair Parts For Master Cylinder] Mirror Holder](https://img.webike-cdn.net/catalogue/daypic140709/23255_1_l_TS.jpg)
A combination with Nisshin different body master. As it is a genuine Nisshin, it is a just fit and a color sutis. If the screw location of a mirror is on a front side and high lposition, the balance on both sides is difficult. If there is a room at the le
A combination with Nisshin different body master. As it is a genuine Nisshin, it is a just fit and a color sutis. If the screw location of a mirror is on a front side and high lposition, the balance on both sides is difficult. If there is a room at the lengh of a handle bar, it may be ok to use the mirror holder. View detail
I purchased for Radipon introduction. I would like to change a mirror into a a light one.
I purchased for Radipon introduction. I would like to change a mirror into a a light one. View detail
"I purchased in order to change a mirror position when the whole round head is exchanged for Kawasaki clutch lever assy. Since it is as planned that a screw location is different slightly as a rumor, a screw hole is deleted and extended with the stick fil
"I purchased in order to change a mirror position when the whole round head is exchanged for Kawasaki clutch lever assy. Since it is as planned that a screw location is different slightly as a rumor, a screw hole is deleted and extended with the stick file which I bought at 100yen shop. It is the completion of adjustment at about 10 minutes. It has been attached comfortably. The reason of minus 1star is that it is too expensive. It should be 980 yen. It is attached in Nisshin RAJIPON." View detail
[Webike Monitor] It was used in order to attach the Meter stay of a photograph this time [ ]. Although the brand name serves as a Mirror holder, there are likely to be more nearly various uses according to an Ideas.
[Webike Monitor] It was used in order to attach the Meter stay of a photograph this time [
].
Although the
brand name serves as a Mirror holder, there are likely to be more nearly various uses according to an Ideas.
View detail
I think just for a moment that it is items which can never be removed if a price is appearance serious consideration although it is stretched. It is somewhat cheaper than a craftsman.
I think just for a moment that it is items which can never be removed if a price is appearance serious consideration although it is stretched.
It is somewhat cheaper than a craftsman.
View detail
This product was found when the cheap thing was looked for, since the fitting hole of the mirror had been lost with master exchange. Although he thought that texture also often has the result comparatively [ cheap ] and a size is also comparatively co
This product was found when the cheap thing was looked for, since the fitting hole of the mirror had been lost with master exchange.
Although he thought that texture also often has the result comparatively [ cheap ] and a size is also comparatively compact and that he had no something to say, black has become a color like charcoal now when to some extent passed after attachment.
Only the point is * one-piece minus.
View detail
It was used when masters were exchanged. Although a price is quite handy, there is no bali and it is high-precision. Since admiration also comes out custom, it is very much satisfied. Although it is before a hit, before attaching, whether ther
It was used when masters were exchanged.
Although a price is quite handy, there is no bali and it is high-precision.
Since admiration also comes out custom, it is very much satisfied.
Although it is before a hit, before attaching, whether there is only any space which can take and kick this needs to be checked.
View detail
It purchased for clutch holder exchange. Since the handle holder portion is very thin, it is very good. It is recommended in that which also says texture.
It purchased for clutch holder exchange.
Since the handle holder portion is very thin, it is very good.
It is recommended in that which also says texture.
View detail
I got attachment of an external tachometer and the pedestal of the digital water thermometer to let it use. A general thing can be attached if it is the thing which the standard practice of the screw suits. Since it was slimer than other clamps an
I got attachment of an external tachometer and the pedestal of the digital water thermometer to let it use.
A general thing can be attached if it is the thing which the standard practice of the screw suits.
Since it was slimer than other clamps and stay folders, it was able to use also for the severe location.
Since the price was also cheap, light and satisfied also with form or a size target, it was good shopping.
View detail
It purchased, in order that right-hand side might project only the lower one, if the lute mirror of TANAX was attached to the bride's TR and the height of a brake was united according to the bride. it comes out, it is price handiness and aluminum shav
It purchased, in order that right-hand side might project only the lower one, if the lute mirror of TANAX was attached to the bride's TR and the height of a brake was united according to the bride.
it comes out, it is price handiness and aluminum shaving, accuracy is good, and since the color was also made into black, it is not conspicuous.
How to be visible became very good and the bride is also satisfied only with the angle having changed a little.
I consider that it is better to buy it with no problem with the combination of a handle and a mirror also for safe reservation when the adjusted angle of a mirror stops being sufficient.
View detail
When it compares with other goods, it is light anyhow. Although it is slightly high, I think that they are good goods.
When it compares with other goods, it is light anyhow.
Although it is slightly high, I think that they are good goods.
View detail
If a brake master is replaced to a brembo, by motorcycle of a naked model, a mirror holder is needed, so that you may certainly say. although the brembo type thing is put on the market from several companies besides an antlion -- us -- -- works -- th
If a brake master is replaced to a brembo, by motorcycle of a naked model, a mirror holder is needed, so that you may certainly say.
although the brembo type thing is put on the market from several companies besides an antlion -- us -- -- works -- the quality was chosen.
A reason is that the color of the simple form which is not decorated and an anodized was liking.
(Smile) If it is except a yamaha vehicle since it corresponds to the mirror common 10 mm of right screw type, the point that it can equip with a pure mirror cannot be overlooked, either.
Moreover, 笙ｪ which is a limitation also with the membrane of an anodized, and a delightful thing which fades thickly and is hard to carry out
View detail
Although the mirror holder and the name stick, not only a mirror but various things can be attached to a handlebar. I connected a handle brace and stay, and I used in order to attach navigation (PSP). They are items which can assume various usage
Although the mirror holder and the name stick, not only a mirror but various things can be attached to a handlebar.
I connected a handle brace and stay, and I used in order to attach navigation (PSP).
They are items which can assume various usage and are truly useful in universal.
However, taking care is one.
Since the pitch is 1.25, this tapped hole is narrowed, it serves as a screw, many of screw threads currently sold at the home center etc. are coarse threads, and since a pitch is different even if it narrows and the size of a screw and a coarse thread suits, it does not enter.
Be careful of this point.
View detail
Since an authentic positive one was damaged, kawasaki D-tracker of 03 models was equipped. It can equip easily [ the space of the handle limited by the slim body ]. Although uneasiness is in pure thinner part reinforcement, the lineup also of the
Since an authentic positive one was damaged, kawasaki D-tracker of 03 models was equipped.
It can equip easily [ the space of the handle limited by the slim body ].
Although uneasiness is in pure thinner part reinforcement, the lineup also of the some colors color is carried out, and it is also possible to push forward admiration custom.
If reinforcement is also proved now, it will be *x5 rightly.
View detail
The place which also exchanged mirrors in passing when it changed into the radial brake master of NISSIN, and a clutch master -- Back has disappeared due to the degree of setting angle of a mirror. Then, the place which searched mirror stay, and t
The place which also exchanged mirrors in passing when it changed into the radial brake master of NISSIN, and a clutch master --
Back has disappeared due to the degree of setting angle of a mirror.
Then, the place which searched mirror stay, and this product were found.
Structure is solid considering the price and it has been dramatically satisfied with it of structure.
In fact, before purchasing this product, it was taken in to the price and the mirror stay made from aluminum was purchased at a certain auction, but the portion of a screw has become useless immediately.
Although it does not change so in price this time also, either, structure is completely different.
* which is recommended
View detail
Since the push cancellation type set switch of the daytona was attached to the ape, the mirror holder was needed and it purchased this product. Structure is dramatically quality with the anodized of silver. And since the fixing position of a mirro
Since the push cancellation type set switch of the daytona was attached to the ape, the mirror holder was needed and it purchased this product.
Structure is dramatically quality with the anodized of silver.
And since the fixing position of a mirror is also comparatively high, back visibility is good.
On a configuration, probably because [ thin ] it is lightweight, a mirror surely blurs very well in vibration.
Incidentally I have attached the pure mirror.
However, I think that good shopping was carried out since it did not necessarily blur, so that back disappeared, and the degree of satisfaction was also raised custom.
View detail
Texture is the highest. It is a range which can also allow a price for itself.. In the direction which converts the circumference of a handle, gets bored with a pure holder, and is insufficient, it is recommendation. It is due to attach also to tw
Texture is the highest.
It is a range which can also allow a price for itself.. In the direction which converts the circumference of a handle, gets bored with a pure holder, and is insufficient, it is recommendation.
It is due to attach also to two-set Sakka's motorcycle.
View detail
Since he wanted to mount an external meter to a handlebar, this holder was used. Since it adjusted to its the favorite angle and place, it was able to attach to the place where a meter is the most legible. I think that there are various uses accor
Since he wanted to mount an external meter to a handlebar, this holder was used.
Since it adjusted to its the favorite angle and place, it was able to attach to the place where a meter is the most legible.
I think that there are various uses according to a device besides a mirror.
View detail
Since the space which it attached when a separate handle was used, but is needed was small, it was somehow settled between the brembo master and the grip. Although he would like to use a brembo master, the logo of a clamp is a recommend in a direction
Since the space which it attached when a separate handle was used, but is needed was small, it was somehow settled between the brembo master and the grip.
Although he would like to use a brembo master, the logo of a clamp is a recommend in a direction not to change.
View detail