【CF POSH】Universal Mirror Holder Review

Mirror Holder is no longer available.

[How is it used?
I bought a used WR250R before the price went up as much as it has now, and it had a ZETA Pivot Clutch Perch CP installed at first, but the Mirror was only installed on the Right Side, so I had to replace it with a ZETA Pivot Clutch Perch CP. Is it legal to use a LargeMirror without LeftMirror, or is it scary when changing lanes?" I looked closely around the clutch and found that the ZETA clutch holder does not have a screw hole for mounting Mirror!
The OEM clutch holder of the WR250R has an integrated Mirror Holder, so when it was replaced with a ZETA one, the Left Mirror could no longer be installed.
I ordered this product as soon as possible to avoid danger, as my driving skills and ability to perceive danger are not very good.
Did you receive the item as per the Image?
I ordered the product after thoroughly checking Webike's product description section, and it was exactly as I had imagined it to be.
Was it difficult to install?
BoltQuantity this product to the space in the root river of the Clutch holder attached to the Handlebar.:It is a simple job to attach with 2pcs.
Quantity:Pair (for Left and Right) If the Mirror mounting spacing of the two mirrors can be installed at the same location, there will be less discomfort when the Motorcycle is viewed from the front.
How did you like it?
Once firmly installed, the Mirror Holder is a normal Mirror Holder without any Mirror gaps while driving.
When I purchased it from Webike, it was on sale at Timing, so I was able to purchase it at a lower price than OEM holders for other vehicles.
Was "Included Parts:" attached?
BoltQuantity for HolderBody and mounting:2pcs are included in the package.
Were there any disappointments?
I purchased a Blue alumite product and it faded faster than other Anodized dyed products.
I am thinking of painting it matte black with a cheap can of Spray if the color fades any further.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I think it would be less uncomfortable when viewed from the front in Symmetry if the Holder is mounted at the same spacing as the Mirror position on the Brake Side.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...sorry my memory is a bit hazy as I purchased it quite a while ago.
[Notes]
There is nothing special in terms of functionality, but Blue alumite fades quickly, so I think it would be safer to purchase Black.
[ITEMS TO BUY TOGETHER
This is an opportunity to use your favorite MirrorQuantity:Pair (for Left and Right) I wonder if it would be customary to purchase a "Custom"?
[Opinions and requests to Manufacturer
The color fades quickly, so I would like you to take measures to prevent this, and I would like you to continue selling this product for as long as possible. View detail

Buy with brake lever set change

The finish looks good and I'm satisfied with the design I want Recommended as a mirror hole replacement when changing the genuine front brake set View detail

Thin.

I bought this because I changed the Clutch lever and no longer have the Mirror hole.
It is good because it is thin and one step higher, so it can be placed anywhere. View detail

It purchased, when carrying out inverse attachment of the ball joint mirror (square shape) attached to ZOOMER to the handle bottom. Since appearance also became smart and the inverse attachment was used as a sub mirror, the back check was completed ex

It purchased, when carrying out inverse attachment of the ball joint mirror (square shape) attached to ZOOMER to the handle bottom.
Since appearance also became smart and the inverse attachment was used as a sub mirror, the back check was completed exactly.
I think that they are convenient parts which can do various usage in the circumference of a handle according to a device. View detail

Mount expansion base to fit in the gap

[How is it used?
Less than 5 years old, about 60,000 km.
Using Ram Mount's M10, Short arm, and Smartphone Mount, the Xperia5 and driveman BS-8 were used for touring and circuit.
It has been exposed to ultraviolet rays for quite a while, but I don't think the color has faded yet.

Was the one you received as per Image?
Simple, just like the picture.

Was the installation difficult?
BoltQuantity of M4:It is easy if you look at this product Single Body because it is complete with 2pc.
However, if you want to screw it into the gap, you will need to remove the surrounding Switch box and Holder, shift them, and then install it.

How was your experience with it?
I haven't put Mirror on it, which was the original intended use, but it hasn't cracked or faded yet.
When the bolts are tightened, there is no wobble, and the motorcycle body shakes when shaken.
Because the mounting bolt is M4 and small, the screw lock was made solidly with high strength, so there was no loosening, and the phone can be used comfortably as navigation.

[Included Parts:were they on?
Installation BoltQuantity:2pc is attached.

[Was there anything that disappointed you?
None in particular. Handlebar in general will have Large resistance.
I've been using it with something else that isn't Mirror, but I've never had it fall off.

If you want to use it as a base for a smartphone mount, the only one with a narrower width than this product is Narrow type by SYGN HOUSE, I think. However, considering the price, there is a difference of several times between this product and Ram Mount, and I think Narrow type has a strong protrusion in front and back, so you may need to use it differently depending on the position you want to install it.

Compared to the various bar mounts, I thought the Merit was a strong choice as long as there was only one thing you wanted to install, it would refrain from looking like a bar mount and it wouldn't get in the way of maintenance. View detail