Reviews
BrakeMaintenance!
If you want to Front up easily, this is a good choice. View detail
J-TRIP is the name of the Racing Stand.
Having felt the unreliability of cheap racing stands in the past, we purchased a reliable J-TRIP product.
It can be used by one person without difficulty, but those who are unfamiliar with it should not overdo it.
The sense of security is wonderful, with a vehicle weight of around 200 kg not causing any discomfort.
Maintenanceetc. can be done with ease.
View detail
That's j-trip!
I bought a Maintenance Stand for my MONKEY125 and this "V receive" purchased
I have only used it a few times, but will review how it feels at this stage.
First of all, the quality is very high quality, and the material seems to last for 10 years even if used hard.
This V-receiver is protected by Rubbers front and rear, so it is not likely to scratch the body of the car (even if it is used incorrectly).
The drawback would be the high price. I think the price is reasonable for this texture. However, if you get the maintenance stand and the receiver together, it will cost you quite a lot of money. But it guarantees peace of mind.
Beginners should be careful not to install in the wrong direction.
View detail
A definite choice.
I had purchased a j-trip maintenance stand for my GSX-S750 and have been using it for a long time without any complaints, so I purchased this maintenance stand for my MONKEY125.
"Taken." is a MONKEY125 with a Stand Hook attached to it. "V receive" separately.
When I actually used it, it was so Limit that I didn't need to adjust the width (laugh).
So when using it, you need to be careful not to let the Hook hit the body of the vehicle. I guess it is the same with other Motorcycle...
The height can be adjusted, but the MONKEY125 was Large sturdy at the factory height. I think it is OK to raise it one more level.
This maintenance stand is light, easy to handle, and has no stability issues. "Taken." It would be nice if the total price, including the
View detail
Very easy to use
I am using it on a Z900RS and the Clearance with the Brake hose is about 1 to 2mm.
I am concerned and will put in Spacer.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
Used on ducati998.
This is Shaft, a cantilevered Roller stand.
Without it, nothing is possible.
If it is a compatible caliber, it will go in easily.
I used it for about 4 years and it was not damaged, just rusted.
Rust used AZ rust inhibitor.
View detail
I think Large sturdy enough for paved roads.
Roller stand is used in combination with a cheap one and this one.
We have a garden with soil and this item is difficult to use.
The roller stand is originally designed to be inserted under the swing arm as the roller rotates, but because the ground is unstable, the stand cannot be inserted cleanly.
On the other hand, the cheaper model does not have a roller that moves much, and in effect, it moves in the same way as a STAND without a roller, so the car body rides on top of the STAND.
In this situation, a well-made product like this one is more difficult to use.
However, I think this product would be easier to use if the place was properly struck with Concrete.
View detail
I used it on my NSF100.
I used it in NSF100.
It is useful when performing maintenance such as wrapping the Warmer around the Front or removing the Fork.
It has about 3 Piece and can be used for various vehicles.
The quality of the product is as good as JTRIP's.
View detail
Easy to use
Used to adjust the balance of the Wheel.
It is thin and unobtrusive to put on the reverse side of the wheel.
The line that can be cut to the desired weight is included, so it is easy to cut and the adhesive is strong, so there is no worry about it coming off.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Well thought out and well made.
I had been using an OEMMaintenance Stand, but I was fed up with the difficulty of making it stand up, so I used this product at the same time I purchased the WideShort roller stands.
It was lifted so lightly that it was as if it had never been there before.
View detail
Fits: Others , DUCATI SPORT1000, DUCATI PAUL SMART1000LE, YAMAHA V-MAX 1680
OEMMaintenance Stand is heavy
In daeg, I was using the OEM one because I honestly thought it would be better, but the STAND did not stand up even if I put my full weight on it. I was able to get it to stand on the concrete dirt floor, but on the steel floor of the Daytona Garage, it was very difficult to get it to stand, and the STAND that applied the STAND bounced back and scratched the Swing Arm.
The j-trip wide stand was used on a different vehicle, but it still goes up lightly.
I should have made j-trip from the beginning.
View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I am satisfied
I installed this product on my YZF-R46. I am satisfied with the quality of the product and I own J-TRIP's MaintenanceSTAND. View detail
Paint is tough!
The paint is durable and does not peel easily.
Functionally, there is no problem, but when the paint peels off...
I don't think it is beautiful when viewed as a custom.
The z900rs is a little difficult to STAND.
The longer length of this product is perfect for this purpose.
View detail
Fits: その他 , YAMAHA V-MAX 1680, DUCATI SPORT1000, DUCATI PAUL SMART1000LE
Wouldn't that be Outlet…
The painted surface was touched up, although it is not safe for use.
These items should be Outlet, not regular priced.
View detail
J-TRIP is the best!
I thought it was indeed J-TRIP!
I have one from another manufacturer, but it is easy to lift.
The stability after raising is good.
It's not something you replace that often, so there is a slight price difference.
I thought I could close my eyes. If in doubt, I recommend it!!!
View detail
Exactly on REBEL250
I am using it with J-TRIP SUPER Low (JT-1203) for use with REBEL250.
The Rubber is solid and takes the Rebel 250 well.
The fact that the Rubber does not interfere with the Silencer due to its height from the mounting bar was also a deciding factor in my purchase.
View detail
Fits: HONDA MONKEY125, HONDA glom, KAWASAKI Z125, HONDA APE100, HONDA XR50, HONDA XR100, HONDA APE50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA MONKEY, HONDA GORILLA50, HONDA MONKEY, HONDA GROM, HONDA GROM
Used for NSR50. Stable and usable.
Circuit and Garage, but it is lightweight, strong, and easy to use. The use of sturdy rubber at the point that supports the Swing Arm is also good because it prevents the Swing Arm from being scratched. View detail
Used in Transporter
Used for fixing in Transporter.
Other uses include Tire Replacement, ChainMaintenance, and ImageTraining at Seat.
As others have mentioned, the part that touches the ground is easily scratched, so it might be a good idea to apply a thin Rubber Seat or similar at the home center.
View detail
Graduated from Stand for Beginner (laughter)
I used to be careful and put the front wheel on WheelClamp before hanging Stand for Beginner, but if I use Clamp, why not just use V-shape? I now realize that this is not the case.
The V-shape is so deep that there is little risk of dislodging.
View detail
Fits: KAWASAKI Ninja650, KAWASAKI Z1000, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI Ninja400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI ZSeries
DURACON on a Dare
The owner of the store where I purchased the motorcycle advised me that the conventional Gold Stand Hook would cause damage to the swing arm body in the event of a fall, and that DURACON would alleviate the shock by slipping or shaving.
I don't want to fall over and try it (laughs).
View detail