Reviews
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
DL1000 V-STROM250 for initial Oil replacement and Oil Filterfor replacement.
I purchased this for the first Oil replacement and Oil Filterfor replacement of DL1000 V-STROM250.
I was able to replace the Oil Filter without any problems.
The Bolt hole in the middle makes it easy to remove the Oil Filter.
View detail
I will never buy from them again.
I used it to disassemble the front fork of a scooter, but the tip broke off immediately. In the end, I used a thousand pieces of the same piece in a quantity of 1,000.:I bought 2pcs and managed to remove the C-ring. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
I finally bought it.
[How is it used?
I bought this to replace Chain.
I've been wanting to get one for a while,
This is a moderately high-end product, isn't it?
It's been 10 years since I put it off, thinking about how many times I'll have to replace the Chain before I die,
I decided to buy it because I mainly play Race and I thought that the frequency of Chain exchange would be there as well.
How was your experience with it?
The Instruction Manual was properly included so I could use it with peace of mind.
I used to use tools like Chain Tool only or Crimp only and I would ruin them quickly. (I would like to believe that my usage was not good)
It can be used simply because it has few configuration parts.
Also, the cans DID look stylish. Cool.
When I opened the lid, it was skunky, so I put the Sponge that came with Brake Pads underneath to make a Cushion.
[Points to note]
I think it will not be a problem if you read the basic Instruction Manual, but you might want to buy a spare pin for cutting.
If it breaks, the motorcycle will not be able to run!
View detail
Can also be used for Mirror shield
The Mirror shield of the MotorcycleHelmet can crack or deteriorate when cleaned with aggressive cleaners, but there is no such concern with this product. The Merit of the Largeest Merit is its portability, which allows it to be brought along on day-trips. Even in the summer, water will not fly out of the bag. "Dried out." I am glad that I can use it normally without any problems. View detail
KITACO KITACO Spring hook
This is a must-have product for spring installation and replacement. I have personally purchased and used KITACO products for a long time, so I purchased this product this time. View detail
Engine overhaul essentials
[How is it used?
I purchased this for Gasket removal and chamfering of mating surfaces during Engine O/H on a TZr50R.
Oil is the same DAYTONA's exclusive oil.
How was your experience with it?
Scraper alone could not remove all of the gasket that had been stuck for many years, so I used oil stone to clean the gasket thoroughly. I soaked it in 4st Oil at first to soak it up because it absorbs Oil quickly at the beginning of use.
After that, special Oil is applied and polished at the time of use as shown in the video.
How did it compare to other products?
I don't know about otherManufacturers, but I was worried about purchasing the number 600.
However, since Gasket removal was going to be the main focus, I bought the 400.
There was no problem here.
[Points to note]
If you continue polishing, you will run out of Oil and the sound will change, so you will need to add Oil immediately.
Be careful not to damage the object when polishing with a piece of Oil.
View detail
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Required for 4EUEngine Overhaul
[How is it used?
I purchased this product to use for Engine overhaul of TZr50R.
The 4EUEngine Flywheel of TZr50R uses a special screw diameter and requires a special tool for this type of vehicle.
Was the one you received as per Image?
The product was exactly as shown in the Image and comes with the Instruction Manual, so it is ready to use as soon as it arrives.
How was your experience with it?
The quintessential product is a dedicated product and is quite easy to use.
Conversely, this is the only use for this Engine, so in a sense it is too much to handle.
To use the Fly Wheel Puller, attach the Fly Wheel Puller to the screw thread on the Crankshaft on the Flywheel side as shown in the video.
While holding it in place with the MONKEY, turn it. If it becomes very hard in the middle, you can easily loosen it by tapping it lightly with a rubber hammeretc. to give it a vibration. In my case, I pushed it through by force.
[Points to note]
Nothing special, but try not to damage Mt. Screw.
How did it compare to other products?
The competing product is the YAMAHAOEM SST, but the price is not much different, and this one is more economical since it comes with a point.
View detail
Double nut or Shift rod.
I bought it to use for double nut and shift rod.
It is 3mm, or about half the thickness of KTC's 6.5mm on hand.
The angle is 75°, which is not so common, so it is easy to hang even if Arm and Shift rod overlap.
Although there is a problem of strength, it would have been better if the jaws had been made a little smaller, as I don't think that high Torque will be applied to thin-lipped products.
View detail
Used for Wiring processing
After all, using a decent tool will ensure a clean and fast completion.
This is one product I wish I had bought earlier.
View detail
Purchased due to the appeal of the cosmetics.
First-class products are always better, but I thought that a measuring instrument of this price would be sufficient. It is more reliable than no management. There are many comparison videos on Youtube, and I found them to be very helpful. If you want to be absolutely particular about tools and equipment, I recommend you to buy a first-class product from the beginning because you will lose money by buying a cheap one. View detail
safe (secure) in one's possession
8mm Hexagon Bolt is Quantity:It was hard to find a tool set that came in a set, but when I saw it, I bought it immediately.
Combined with the included Ratchet, tightening and untightening was very easy.
View detail
Just the right size for a Small Type car
I think the size is just right for replacing oil in Small Type cars. I think the price is also normal. View detail
For terminals of 4.0sq cord for charge current
I bought a battered 900SS (900SL) and am Restore.
The harnesses are also in bad shape, so we cut and re-created the damaged parts of each section.
The very thick wire for the Starter motor and the carburetorTire wire connecting the Engine and Chassis are also deteriorating over time and are crumbling and falling apart.
The internal core wire was also corroded by moisture that had entered the wire and was spewing GreenBlue, so it was re-created.
After the terminals are crimped with Electric Works Pliers, solder is applied to the terminals for secure wiring, and these terminals are protected with Shrinkable Tubes to prevent shorts.
The tube is coated with an adhesive that melts when heated and shrinks to make it Completely Waterproof, preventing moisture from entering the cord through the terminals.
It also serves as a Cover for the terminals, so using different colors of this Shrinkable Tube (Red and Black) helps to prevent accidental wiring.
It is especially effective when used in the terminal section that conects directly to the Battery terminal.
Φ9.5 is quite thick for Motorcycle wiring, so there are not many uses for it, but it is ideal for terminal protection for Starter and Earth.
Although it is possible to purchase a similar product at a wiring store at a much lower price, considering the time and effort required to go there and the use of multiple mail order sites, I think it is most cost-effective for ordinary people to buy a DAYTONA product at Webike, even if it is a little more expensive.
View detail
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
Very useful
This is a very convenient product to have when replacing Brake fluid. I think it is worth the price. View detail
Fits: HARLEY-DAVIDSON Universal
Voltmeters for Motorcycle
Although not particularly necessary, a voltmeter was installed since it is also attached to the car.
White light is also provided, making it easy to see at night.
KITACO for mounting on Mount bar (KITACO) Meter clamp set Motorcycleetc. 672-1126900, etc. required.
Other items in the photo are KIJIMAHandlebar Mount Bracket, Eye PRO ShiftIndicatorAPH8 Red, SP Mukawa Φ48Small DN Tachometer 12500rpm (with Rev indicator)
View detail
Now you can rest assured.
The original packing ran out after the fifth oil change, so I replaced it with a spare packing.
Even if there is something wrong with the packing the next time the oil is replaced due to poor installation on my part, I can replace the oil without worrying because I have another spare.
View detail
Used for Brembo caliper
I purchased the Beta pin for Caliper's Pad pin because it had run out at some point.
It was cheap and saved me a lot of money. I will be Wiring it just in case.
View detail