Reviews
Costa's strongest?
I had no complaints with OEMNormal step, so I replaced only the footpeg with HURRICANE's one.:Pair (for Left and Right) I decided to purchase this product because it was inexpensive with Type, which uses Normal pedal.
The included instruction manual clearly explained the procedure for replacing the Brake Side for ABS vehicles, so I was able to install it smoothly.
Repair Parts was fully supported, the quality was good, and I was satisfied with the better parenthesis.
View detail
Higher than BABY FACE
Except for the footpeg and heel plate (and color), it is the same as BABY FACE. The cost is about 12,300 yen higher than BABY FACE, so the cost performance is not good. I am satisfied with the color and position.
The car Both SidesChange arm uses the original OEM Product, but of the 9 companies I checked, only BABY FACE and YOSHIMURA did not make a dedicated change arm. I was concerned that the shift rod was leaning, so I installed Striker's Change arm and adjusted it by 2mm with a washer, and it became almost parallel to the car body.
Well, I don't think there is anything wrong with it being tilted, but I am concerned about the way it looks.
Footpeg is made by JagerLauftK.M.T. I like it, so I changed it. Also, the Brake Switch Bulb on the Right Side looks like an afterthought.
I wrote what it is, but I like it a lot.
View detail
Fits: YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG Zr, YAMAHA JOG Zr, YAMAHA JOG Zr, YAMAHA JOG Zr, YAMAHA JOG Zr, YAMAHA JOG (2Cycle)
rear impact
I am very satisfied with the high-quality packaging and the work of the shock absorber, my weight is 100 kg, it holds the road well and does not sway on the pits. I recommend View detail
If you are dissatisfied with Cornering in v9bobber, Recommendation
I've ridden more than 25 large small bikes from PAL to HarleyFLH in the past, and I think this v9bobber is the right bike for the end of my life,
I was wondering if there is a weakness in v9 that has been bothering me for a long time:when I open the Axel after breaking hard during cornering, the frame seems to sag. I feel like I'm afraid of it.
I found an update on the Net that it became easier to drive after changing the front suspension spring, so I got a Matris FKE Spring Kit and installed it on my car.
NORMAL is Winding with Tight Corner, thanks to Torque? But when I changed the front suspension, the front fork seemed to bounce and sway. But when I changed the front suspension, I found that the front fork was bouncing and swaying! I had never changed the suspension of a motorcycle before, but I was surprised at the change this time. However, the spring rate and oil level have been raised, which makes the fork harder, so small puddles of water will push the fork up. However, the cornering has become much easier to ride. Especially when you open the Axel on tight corners, the stability is good. You can feel secure when entering a corner, especially on downhill tight corners.
If you are not satisfied with the Cornering on v9bobber, I had a Recommendation Motorcycle shop do it along with Oil replacement, and I think it is a very cost effective part even with labor charge.
I also wanted Rear suspension in the future ^_^.
View detail
Unexpectedly good
The HRCGROMCUP Regulation has given us the OK to start this year.
Purchased
I've been replacing Spring for a while now, so I'm just going to get cracking.
I was able to install it.
If you are doing this for the first time, you will need a Spring replacement tool.
It is good to be able to start from Initial 0. It is good to be able to change Initial by Course, Temperature and Condition.
View detail
Fits: HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1000 SUPER FOUR (SUPER FOUR), HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100 BLACK STYLE, HONDA CB1100 BLACK STYLE (ABS), HONDA CB1100 E Package, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 EX <ABS> (Special Spec.), HONDA CB1100 RS, HONDA CB1100 RS, HONDA CB1100 RS, HONDA CB1100 <ABS>., HONDA CB1100 <Infinite Edition>., HONDA CB1100 <Type I>.
For CB250F
Same as the genuine Rubber Footpeg . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail
Fits: HONDA CBR600RR, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA REBEL500, HONDA REBEL250, HONDA REBEL250, HONDA X-ADV, HONDA X-ADV, HONDA X-ADV, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA VT1300CR, HONDA VTR, HONDA VTR, HONDA VRX Roadster (R100 ROADSTER), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR(800), HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA SHADOW Slasher (Shadow slasher), HONDA SHADOW Slasher (Shadow slasher)
For CB250F
Same as the genuine Front Fork Dust Seal . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
Front Fork Oil Seal Set For CB250F
good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail
KITACO suspension tool for the Honda MSX/Monkey
These KITACO Fork Thrust Adjustment Gauge Set are extremely useful in assisting you on setting the exact same height on both fork legs. They have 8 different height settings and are made of stainless steel which means they wont rust. Only improvement is that they could come with a ring to attach the two together, but you can easily add one. Overall it's a quality little tool from Kitaco! View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4R, KAWASAKI ZX-4RR
It is easier to put in Neutral when stopped.
The one that makes it easier to get into Neutral, which you'll know when you use it. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
I can now drive like I've drawn a clean line both Curve and straight ahead.
While curving Curve, it often went in a direction I didn't expect.
Curve on a rough road surface is a real thrill.
After the installation, this was no longer the case, and the car was able to turn in the desired direction as if a clean line had been drawn.
Straight line driving has also improved.
It also reduces Handlebar being taken out on rough roads.
Installation is a snap if you have the right tools.
It's pricey but well worth it and I'm happy with the Large change.
I am rather upset with Honda for not designing with this rigidity from the beginning.
View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA HRC Grom, HONDA HRC Grom, HONDA NSR50, HONDA NSR80, HONDA NSF100, KAWASAKI Z125 PRO
Can also be used with Hollow Axle Shaft.
The name is "Axle Protector", but I installed it as a stress-up part because I thought there was not enough red around the front tire rather than to reduce the damage of the vehicle at the time of a fall. I already had an experience that I had a hard time to put in the Shaft when I removed the front tire by replacing it with KITACO's Hollow Axle Shaft, so this time I used DAYTONA's Maintenance Stand for Front. I was able to insert and remove the shaft easily because the vehicle weight was not applied. I think it is difficult to install by DIY because the fork hole, collar, and wheel are not aligned unless I lift up the maintenance stand or the handlebar, etc. I am satisfied with the red accents around the front tires, which are mostly black parts. View detail
Very platePad
Heel plate is a place that is easily scratched by shoes, etc., so we recommend that you attach a pad to the heel plate.
Speedra's pad is Carbon Style with good texture.
Installation is as simple as attaching it.
View detail
incomprehensible
Instruction Manual is too complicated and difficult for beginners. I think some knowledge is necessary. View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R
Can be raised or lowered freely
I had previously raised the ride height of my 25R with BEET's SportsLINK, but I couldn't stand the gold or silver-colored parts that stood out, so I looked for a product that was less conspicuous and more functional.
Installation is easy if you have a Rear Stand and Jack. However, it is difficult to adjust the plate under the weight of the car because of the narrow space, and it is difficult to turn the plate with Spanner, so it would be easier to turn the plate with Jacketc. There is an adjustment allowance of 2cm up and down, so considering the time and effort required to replace the plate, I think this is a good product.
View detail
Fits: HONDA dachshund, HONDA Shirley.
OEM Equivalent Product
The front hub bearings were sticking and the shaft axle was worn, so we replaced them with new bearings. The paint was very good and the bearings were already greased up, so it was just a matter of assembly. View detail
Front axle replacement
I had no idea that replacing the Axle Shaft would make such a difference. View detail
Very good
The texture and finish are both good and I am satisfied with the Large change.
Shift feel, which was a concern before the replacement, is just as good as OEM.
I wish the Position could be moved back a little more, but it is within the range of no problem.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Design is good!
Lowdown type was selected for better footing.
MORIWAKI is a good parenthesis because it also has an auxiliary bolt!
I am satisfied with it with no regrets.
Parenthesis was further improved by using Titanium for Bolt.
View detail
It was very good!
The price is low, but the quality is very high and I had no problems at all with the installation.
I am considering purchasing another bottle in Stock!
View detail