Reviews
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Mounted on REBEL 1100
I couldn't find any for the Rebel 1100, but this product was said to be compatible with it, so I bought it and installed it as an ACC power source for the Fog Lamp Unit. It was a simple installation, just peel off the tape and install it between the couplers. View detail
Z900RS (2024) For power supply extraction
Used to take out USB power supply from Z900RS (2024 Yellow BallEdition).
Just stick it in the Connector under the Seat. (Coupler is wrapped around with Black Tape as you wrote.)
No problem as it stays under Seat even after sticking.
It is very easy and anyone can work with it.
View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
To DAYTONA's D-UNIT.
Used to install DAYTONA's D-UNIT. I did a lot of research, but I was able to install it without any particular difficulty. View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
Very handy and convenient.
I use this product on my Kawasaki Z400 (2024 model). It is very convenient. View detail
No need to provide a phone and connection Cable
It allows you to connect directly to your phone when supplying power to your phone. I find it very convenient not to have to have a separate short USB Cable, and I think it looks much nicer than having a USB Socket attached to the Handlebar. I feel the price is a bit high, but I use it very conveniently. View detail
It is usually convenient.
I think it is a standard product, but it is very useful. If I had a wish, I think it would be more convenient if the cable could be directly inserted without using the Bullet Type Terminal, since the cable is never separated at the Bullet Terminal anyway. Also, I think it would be easier to install if it were 1mm thinner and smaller. View detail
I was able to do it by watching a YOUTUBE video.
I have a long history of motorcycling, but I am an amateur at tinkering. I am even more inept at tinkering with engine and electrical systems. But this time, I wanted to install a grip heater on my PS250, so I decided to take on this challenge. The problem is where to get the main power supply and ACC power supply, but I managed to connect them by using Instruction Manual and Youtube.
Wiring under the Seat is also very nice as it fits nicely. The YOUTUBE video is also very helpful. However, if you buy a Ponghang Motorcycle from the Showa era, you will be in a state of confusion because the wiring is not of the dimension of the power supply unit. I am sure that a modern Motorcycle will be easy to install.
View detail
Failure after using Grip-Heater
Grip heater
Smartphone Charging
drive recorder
The above three points were connected.
In the summer, it worked fine.
Grip heater was connected at 7.5A.
It was getting cold and when I turned on the Grip heater, I smelled a burning smell and then the other two points stopped energizing as well.
View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
ideal power harness
It is essential harness because there is no additioanl power outlet prepared in SV650. Quite easy to connect but need to re-route original cable for tail lamp due to the lengh of the harness. I am going to supply 12v power to the relay with this for operate the acc. electrical parts. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
The easiest way to start tuning
If you're not familiar with electrical tuning, you can turn into a professional with this product. You can easily draw electricity by removing the headlights and attaching them. The downside is volume. Reattaching the headlights may require some skill. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
Used for DAX125
I used this product to connect USB to my DAX125. The Bullet Terminal is female for both Plus and Minus. I was thinking of taking the Chassis Earth out of the Minus, but I couldn't get the Chassis Earth around the Handlebar, so I used the terminal of this product. It is convenient to be able to get power supply without using Electro Tap. View detail
If you want to install electrical components, this is a safe choice.
It is helpful because three power sources can be taken out with a Batch Direct, Key On.
Attachment power was taken from ServiceCoupler with DAYTONA's Easy Power Extraction Harness.
I have been using the Fog Lamp and Grip heater from this power supply and so far have not experienced any problems.
I am considering how to handle the Black Cover of the Battery since it does not close completely when the Wiring is interrupted at the Plus terminal of the Battery,
View detail
Attachment to power supply extraction
It was used to retrieve the Attachment of DAYTONA's Power Unit from the ServiceCoupler.
It is easy because it is Couplet-on.
View detail
very convenient
[How is it used?
Wiring mess cleanup
Was the one you received as per Image?
It is not the Parts that are about texture, but well, it is as per Image.
Was the installation difficult?
It is not difficult with a minimum of knowledge.
How was your experience with it?
It is not necessary to have it, but it is Refreshing to have it.
[Included Parts:were they on?
Tie Band, Wiringetc. for 2 streets, and I think we have everything we need.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Wiring No processing
I bought this for Grip heater, I didn't want to modify the Wiring, so I am Large satisfied. View detail
Convenient to consolidate Wiring
It is good that multiple electrical items can be wired together either with the key or directly to the battery terminal, so that the number of wires connected to the battery terminal can be reduced and the battery can be refreshed.
It is not only cheaper than making a similar circuit with Relay, but also reduces the number of wires. If you make multiple circuits by yourself, you need to connect as many batteries and relays as the number of batteries and relays, and the area around the terminals of batteries becomes messy, but you can prevent this and make them reflective. 。
The only unknown is durability, so we'll get to that later.
If the durability seems to be OK, I would like to replace the Relay backs with these on my other motorcycles.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
I thought it was for etc installation.
I bought this product because I wanted to install etc. on my yzf-r1.
It is a Recommendation because it is very easy to take out the power Wiring with Couplet-on.
View detail
Proper & Safe power distribution
This D-unit was very easy to install, tap directly from battery. This is the best and safest way to distribute power to additional accessories your bike may have. Each outlet is fused, so there's an added layer of safety. Each of the connector from outlet also has waterproof cover. Minor drawback is the terminal connecting from the battery is open, so depending on where you install it, you might risk having water passing thru (rain water, during bike wash). On my bike, i had to cover it with plastic so no short can happen. View detail
I think it is necessary
The quality is quite good It's good to organize the wiring well for the feeling of use Product to buy together KIJIMA Plug Pin Set [304-7126] It's easy to install Cost performance and comparable price to other products WeBike packaging is always great, arriving in a week for delivery and packaging Advice is that Monkey 125 has a small headlight space, so you can't put much wiring in it However, you have to consider it because it comes to the battery and connects the lines View detail
Good Connector!
This is the best way to get power out of the device, and it is useful in tight spaces. It is also useful in tight spaces and saves you the trouble of attaching Bullet Type Terminals, which are often tied together when wiring is long. View detail