Reviews
Fits: Others
Mounted on PCX125 (8bj)
Mounted near the Handlebar Clamp on a PCX125 (8bj). The USB part is secured with a Type Tie Band that can be adjusted many times. View detail
Fits: Others
Wiring
DAYTONA USB2 Port was attached to this MotorcycleSV650 (along with ETC) with Relay connection to the store (RB) when I bought it. Once Material:The lid on the Rubber was torn off, but I was able to get just the lid separately. I'm trying to find out what kind of Wiring the store used to install it. First it went under the Handlebar with the Clutch lever wiring, then it was crawled under the AirCleanerBox (removed) with a bunch of thick wires over the Engine, and the transformer that came with it was set to 12→5V. This transformer has a risk that the cheapest one will not be constant and the most large current will be large. +The + is connected to the Relay on the Right under the Seat after switching to the Wiring extension after the Fuse.-The ++ is connected to the Relay cord at the Rear of the Fuel tank. View detail
It is easy and convenient to install. I hope it will be used for a long time.
It is easy and convenient to install. I hope it will be used for a long time. -------------------------------------------------- -------- It's easy to install and convenient. Powered by Google Translator View detail
Fits: Others
Motorcycle dedicated power supply Main key linked USB 1 port
I bought this camera in the middle of summer to take pictures with USB power supply because my gopro stops working when using battery due to heat. Installation was easy because I could take it off from the brake switch. View detail
The L-shape is the key.
[How is it used?
Used for cell phone charging.
Was the installation difficult?
It is very easy to use, just plug it into the USB power supply.
How was your experience with it?
I have been using it for a long time.
The L-shaped part that plugs into the cell phone allows Wiring to be handled very shortly.
Wiring itself is not overloaded, so it can be used safely.
The light in the L-shaped part glows when the power is on, making it easy to recognize when there is a problem.
It also comes with a Waterproof Cap for when it is not in use.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Charging Cable holder is not Included Parts:.
If you want it, you must purchase it separately as a Repair item.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I want the charging Cable holder to be included.
View detail
USB power supply for rain or shine
[How is it used?
Used to charge cell phones when touring
Was the installation difficult?
The power supply needed to be taken from the Battery, so we asked the Dealer to do it.
Wiring arrangements need to be considered and passed through.
How was your experience with it?
It is also used in other Motorcycle and is a stable product.
The RubberCover allows the lid to be closed when not in use.
Navigation and music at the same time, though, the cell phone charge is running low,
As long as this USB power supply is used to charge the battery, the amount of charge is never less than the amount used.
The person I know uses a different USB power supply, but the amount of charge is less than the amount of use,
Charging was not up to par.
Power consumption must be confirmed.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Convenience is a Matter of Life and Death
I think it is a very high cost performance product.
I purchased this product with confidence because it is a well-known Manufacturer.
These days, smartphones have become a necessity for Navigation and music.
Especially when touring, I think there is an increase in the use of LINE phones while talking on the phone.
With this product installed, there is no need to worry about your phone running out of charge.
I have owned a vehicle with two mouths, but honestly, I feel that one mouth is sufficient.
As for the installation, I installed it on a crf250l md44 with a batch direct.
View detail
Fits: Others
A product of trust
Successive generations of Motorcycle, almost all with this product installed.
TypeC port lid is Material:If there is a non-Rubber one, I would like to go that way, but I can't seem to find one,
This one from TypeA, while bulky, has a secure and reliable lid.
Installation is on the easy side, as all you have to do is pull from the ACC power source.
View detail
It is more Compact than I expected.
I purchased this product because when I installed a new navigation system, the power supply was specified to be from Cigar.
However, I did not install it in Motorcycle because I modified it to be able to get power from USB after all.
Since it is a USB + Cigar socket, I was expecting a large body.
I thought it would not be too much of an obstacle even if it was installed around the handlebar.
I thought
From now on, I will attach it to a 12Bolt power supply in my home to check the operation of Motorcycle's electrical components.
I will use it as a Tool.
View detail
Fits: Others
Easy installation and easy USB installation ◎Wiring color is a bit gaudy
■ Design
Unpainting BlackPlastic is a color that is easy to blend in with Large Mortgage Motorcycle because the Handlebar Control Switch is black. It is possible to put it between the lever holder and the control box depending on the model of the car, and because of its slim design, it would be more comfortable in shape. However, the colors of the wiring are black and red, which gives a rather gaudy impression, so motorcycles that use black around the handlebar will need to be a little creative.
Functions and Performance
The Body has two USB ports, each capable of outputting the most Large 12W (5V/2.4A). This is the conventional fast charging standard before QuickCharge and USB-PD came out, and we think this performance is fine for charging a smartphone while touring. As mentioned earlier, some of the latest technology devices are capable of charging at higher speeds with more Large power, but we do not consider these to be very suitable.
However, if the device is to be charged while exposed to direct sunlight during the day, the ThermalSlotRing will be triggered by the heat generated, even in winter, and the power supply itself may be restricted or overheated, limiting the use of the device, Overheating may limit the use of the device.
If this is the case, the device will not be able to perform as it should, and if it is unable to supply power in the first place, it will be a complete disaster.
In addition, considering that the Type-A terminal can be used to power Income, WearLOVE LeDevice, and Mobile Battery in addition to the latest model smartphones, we believe that this product, which is highly universal and supports rapid charging, offers a good balance of performance and usability. We think it is a good balance of performance and usability.
Mounting
In the case of the JC75 Grom installed this time, the handlebar is black, so it would not look out of place anywhere, so it was installed on the Right Side of the Clutch Side Lever holder. To install the body, simply remove the cover with the screw, insert the rubber sheet between the cover and screw it shut while hooking the cover.
As for wiring, the Transformer Unit is connected to the Body by a Cable. Furthermore, a wiring for power supply extends from the Transformer Unit. The length of each Cable is about 30cm. Extension Cable is attached to the Wiring for power supply. The EarthWiring is connected to the front cowl of the vehicle frame by removing the front cowl and inserting it into an appropriate bolt on the vehicle frame for Extra Grounding. Extra Grounding by removing the front cowl and inserting it into the appropriate bolt on the frame of the vehicle.
After turning the Main key and confirming the energization, while checking the Clearance of the Handlebar, the Transformer Unit is put together with the Tie Wrap attached to the existing Cable in the Cowl and returned to its original state to complete the process.
■Usability
There is a rainproof cover, but since it is a simple silicon cover, I am a little concerned that the waterproof performance will deteriorate over time. Also, unlike KIJIMA and other products, it cannot be used in the event of rainfall because of the direct contact with water when the cover is removed. However, since there is a Fuse in the Transformer Unit, it is safe in the event of a short.
I used an appropriate Cable because I didn't have a short USB Cable, but it seems to be easy to use because you can use a Cable of about 15cm for smartphone power supply.:Pair (for Left and Right) The type is divided into upper and lower sections, so it is easy to use even for products with a large connector section.
■Precautions for installation
The wiring of the power supply depends on the type of motorcycle and the system from which the power supply is obtained. Depending on the model, not only the year but also the country of production, the CouplerSpec. and the shape of the terminals may differ.
Also, since the standby power is large, it is recommended to use the main key instead of connecting directly to the back-up.
View detail
Except Motorcycle!
The one attached to Motorcycle is not USB-C Type, so I use it to charge my phone at bedtime. it is L shaped so it feels Fit to the phone while charging and has a charging Lamp so I can easily locate my phone in the middle of the night. I wish it was a little cheaper. View detail
3A output, so when you are in a hurry
It is a bit of a hassle, though, because the side cowl needs to be removed,
If you follow the instruction manual (excerpts from the service manual), you should be able to install it within an hour.
When returning the cowl, make sure that the claws and other mating parts are properly seated, and fasten the bolt and clip.
It has a 3A output, so if the Device side supports it, it can be charged quite quickly.
Lids are Material:I wish it had a sturdier feel because it comes right off with Rubber.
Since it is key-linked, I borrowed D-Unit's ACC line from here (Red/Blue line).
View detail
Double!
I usually use a single-body USB when I install a USB power supply. This time, I decided to use two USB plugs because it is the same work to install one or two USB plugs. Naturally, one USB port is for my phone, so it is essential, but the other one will be useful in some way if I have it. The price is not much different, so if you have the space to install it, I recommend you to use the Bubble connector. View detail
DAYTONA for peace of mind
I put the Attachment Power Harness over it and took out the USB power supply. I use it for the power supply of the quad lock and the detector power supply, and it is very stable. View detail
charging
I was looking for something good for charging my cell phone, and this one had good reviews and was not too expensive, so I bought it.
Power saving, Compact, Waterproof is good, will I use the Charger connection? I don't need it. I don't think many people will use it.
Is constant connection a subtle use of power or does it raise Battery? It is a hassle to disconnect, but I would like to see how it goes for a while.
View detail
Where it fits right in.
Quantity in the gap between Light Bracket and Headlight:Can be Set.
Wiring is easy from within Headlight.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Quantity in OEM Hole:Set
The CT110 HUNTER CUB is an Exclusive Design and can be easily installed in the OEM installation position of the CT110 HUNTER CUB.
Wiring was also easy to handle since the connection was made from within Headlight.
View detail
Increased.
Until now, I had attached the same DAYTONA one-outlet Type for charging my smartphone, but now that I need power for my DriveRecorder in addition to my smartphone, I decided to purchase a two-outlet to add a USB power supply.
Since there was not enough space around the handlebar, I thought about using the Slender Type, but decided to go with this one because of its reasonable price. I was able to finish the installation easily because I used the wiring and replaced only the coupler in the middle of the coupler. The other was installed in the cowl bracket inside the Bikini cowl for the DriveRecorder.
The DriveRecorder can now be used while power is supplied.
For new Wiring, one mouth will be needed, or replacement needed due to defects etc.
I will keep it until the time when it is ready to be used.
View detail
Fits: HONDA CT125CT110 HUNTER CUB
Easy installation and good cost performance.
If you are going to buy an OEM product from a retailer, it is much more economical to install this product yourself. View detail
Great design, bad quality
I do like the concept and the design. This item is not durable because the quality of the cable is poor. It is a very soft cable. All the cables in this device are too thin, not much copper, low AWG. The jackets of the cables are also thin and soft. The box containing the circuit has a rubber gasket, which is nice, but the holes for the cables are not weather sealed. The other problem with this is the USB-C port, which doesnt hold plugs snugly. I tried with different cables, all plugs fit snugly in my phone, but too easy to remove from the Daytona charger. Also the rubber protection plug is too easy to unplug by accident. At first I liked a lot this design, because it has a separate power supply unit, which makes the outlet very small and convenient. But the cable between the PSU and the outlet is too short. It was a pain finding a way short enough for what I needed, because you have to install this little PSU box in a cool and dry place. Anyway, It was a big job because I found a place for this box inside the fairing panel (I had to remove 4 panels to reach this place). The installation was a success. The result is great, but I am sure this device will not last much, because of the poor quality of the cable. It is just a standard phone charger cable, low AWG, soft jacket. Because it moves whit the steering wheel it should have a good quality cable (higher AWG and better plastic jacket). The price is good, the quick charge mode works good, but i will have to replace this soon because the cable will not last. It is a shame Daytona have great designs but they make bad products because they use cheap materials. I would happily pay twice the price if this had a good quality durable and longer cable, a better quality power supply box and a better quality outlet with a solid snug fit. View detail