Reviews
Rear Wide
In order to turn Rear into a popular foot, I newly modified Swingarm, so I exchanged Axle Shaft with a longer one than usual. Since GM - MOTO who bought this time has many kinds of Shaft chiefs, it is good to ask the person who makes it to the Wide once! It is an absolute Recommendation for those who are RearWide!
View detail
Just right for everyday use
Buy DAX's Rear wheel a bit to make it a little wider. Although a nude part was seen in the finish of cutting, there was no problem in using it without distortion or hole misalignment. Size was also just right, so I will continue to use it and I want to see a state. View detail
Easily become wider
Purchase for DAX Rear wheel Wide. Recently, 1Quantity : Although 2pc stop seems to be popular, it seems that there is no problem so far for the ordinary use even for stopping eight here. Although the gap with Chain line was sufficient, it seems that it is necessary for machining such as scraping etc. in some cases because Bolt which stops Torque rod of Rear brake is narrowing gap.
The Minus point is a place where BALI is somewhat large, but it is good when thinking about price.
View detail
Blinker set
I changed it exactly like Blinker for 12v conversion.
Blinker of this type, I hear that the spot welding is peeled off by vibration, so I expect you to have it for a long time.
View detail
MONKEY Long Swing Arm
Buy 12 cm to make it LOW Long. I thought that some processing is necessary because it is made in a foreign country but I can install it without machining Racing Stand Hook arrived and I think that Cost performance is pretty good. View detail
![Aluminum Swingarm Type G [Disc Type] for APE](https://global.webike-cdn.net/photo/article/37/1444656588037L.jpg)
Cospa is okay, is quality a step further?
The price is overwhelmingly cheaper compared with the famous products of other companies (Originally this price is reasonable?) is.
Adjusting the tension of the Chain When attaching the Slider for Axle Shaft, the processing accuracy of one Side was poor, and as it was, it was in a state where it was Large and not addictive.
Aluminum Why did you deal with it by cutting gorigor with File at hand, but you can not find it even if you temporarily construct it when you inspect it?
Without it it was disappointing that the evaluation was ☆ 4 ranked.
Let's expect improvement of Manufacturer.
View detail
Required for Aluminum Swingarm for GM-MOTO APE
OEM's Axle Shaft seems to be too long to divert, so I bought it with Swingarm.
Since shipping costs will apply when you purchase it separately, please be careful not to forget to buy when purchasing Swingarm.
View detail
Watch Impre
Impre looking,
I bought it as a reference for the time being.
Although I bought it and installed it
I do not know if it's good or bad.
Later, I just pray that I will not break.
View detail
Left (Battery side) Use only
Right Side does not use because it is equipped with Catch tank.
I only use Left, but Large Kimono is also good looking.
I think that there is not a high Manufacturer object and a Large difference.
Of course it is okay not to injure those who do chamfering simple corners,
Even if you buy high items, I think that some maintenance is necessary as well.
Just to fix it to the car body is fixed with three claws,
Since there is no flexibility like Plastic, it is hard to fix it if you do a little gap.
It's pretty delicate but you can adjust it so let's do the final tightening of Bolt at the best position.
I think that it would have been a little lighter if they could sell one by one if possible.
View detail
It's pretty good..
Although it is inexpensive, finishing and looking feeling is good for price.
Casting Skin is a little cheesy so I paint it from the beginning and use it.
Performance is normal, you can use it as usual.
Although we are attaching and detaching Wheel frequently over 4 years, there is no GEAR chipping.
Especially this is not something, but anyway it is cheaper to w w
View detail
![Aluminum Frame Oil Cooler with Bracket [Rubber Hose]](https://img.webike-cdn.net/catalogue/images/36162/mky-00026-SUPER_1_TS.jpg)
Fits: HONDA GORILLA 12V compatible, HONDA GORILLA 6V compatible, HONDA MONKEY 12V compatible, HONDA MONKEY 6V compatible
Included Parts : There was a Garbage named.
First of all, the inside diameter of Hose is Large, Hose is a skusca, it does not become usable, I bought a Hose of Bridgestone again (About 600 yen).
Next, the shape of Oil Outlet Port (fin) It was no good and Plug cap could not be installed.
This was also about 5000 yen when buying again.
After all, only Core and Banjo kind could be used, it became high shopping.
It is a result thought that it was good to buy only cheap Core.
View detail
A very helpful all-in-one product that comes with everything you need if you plan on doing a restoration. It comes with the full wiring harness a full lock set including the key switch, petrol tank cap, steering lock and the helmet holder. The electrics a
A very helpful all-in-one product that comes with everything you need if you plan on doing a restoration. It comes with the full wiring harness a full lock set including the key switch, petrol tank cap, steering lock and the helmet holder. The electrics are also included like the horn, cdi, distributor, regulator and spark cable. Also included are the the right and left switches with new grips. A problem I had was with the CDI as it was misfiring, however I don't have the original engine, and my friend with another engine had no problems. One thing that really annoyed me with this kit is that the left switches have an integrated clutch lever, but the the right switches don't include a brake lever as you can see in the pictures. Maybe they thought about people who install aftermarket brakes but an alternative should be provided. Other than that it is great value for money. View detail
Fits: HONDA MONKEY, HONDA GORILLA
I installed this kit and GM-MOTO swing arm simultaneously. It is a kit for 8 Inches. The gap between the wheel and the caliper is about 1.5mm. I was very surprised about it although they didn't touch each other.When I tried the work of air bleeding, I
I installed this kit and GM-MOTO swing arm simultaneously. It is a kit for 8 Inches. The gap between the wheel and the caliper is about 1.5mm. I was very surprised about it although they didn't touch each other.
When I tried the work of air bleeding, I had to step on the pedal further although I tried many times. I couldn't finish it completely because the stroke amount was so deep. So after I took off the master cylinder once, checked the inside and tightened each part furthermore, I did the work of air bleeding again. But the air didn't bleed completely and the situation of the pedal remained deep.
Then when I removed the calipers and checked them, some thin rubber pieces came out from the plug hole. So I cleaned up the inside of the master cylinder and brake hose carefully. Nine rubber pieces came out from the inside.
I was so surprised about that. It made me so angry and I was really shocked about the Chinese quality. After finishing the work of air bleeding and the installation, I rode on my motorcycle. This time the braking force was increased to be doubtless and the stamping margin of the brake pedal was OK, but the subtle adjustment of the braking force was not so good.
Owing to it, it took more than half day. Although the appearance is good considering the price, about the performance, I can't say anything... It might have been unlucky in my case but I cannot recommend this product as the merit is only cheap price.
View detail
Fits: HONDA GORILLA 12V compatible, HONDA MONKEY 12V compatible, HONDA GORILLA 6V compatible, HONDA MONKEY 6V compatible
The main part of an Oil cooler thinks whether it is inexpensive without crushing of a Core etc. Merely ..... The negligent degree which carried out alumite treatment with a BALI of the Banjo bolt is Chinese touch.Since Pons attachment was slig
The main part of an Oil cooler thinks whether it is inexpensive without crushing of a Core etc.
Merely ..... The negligent degree which carried out alumite treatment with a BALI of the
Banjo bolt is Chinese touch.Since
Pons attachment was slightly dreadful, it BALI-picked lightly and attached it.
View detail
With the MONKEY of commuter rapid-service specification, since oil supply of the week 1 was troublesome, it changed into the Gorilla tank.Since the Sticker of the SIDE was not pleasing, it removed and attached.It was easy, finished immediately and has
With the MONKEY of commuter rapid-service specification, since oil supply of the week 1 was troublesome, it changed into the Gorilla tank.Since the Sticker of the
SIDE was not pleasing, it removed and attached.It was easy, finished immediately and has satisfied
clearing work.
View detail
Good pedal for hydrolic brakes, you might need to bend the bracket for the spring a bit inwards, and the brake lever (back end) a bit to get in line with the hydorolic cylinder. for the rest it worked fine for me.. nice quality for that price.. del
Good pedal for hydrolic brakes, you might need to bend the bracket for the spring a bit inwards, and the brake lever (back end) a bit to get in line with the hydorolic cylinder. for the rest it worked fine for me.. nice quality for that price.. delivery time was within a week and a half.. View detail
also often and bad, there is nothing -- serving -- ? -- -- it functions ordinarily -- epsilon- ('∀`;)
also often and bad, there is nothing -- serving -- ? --
-- it functions ordinarily -- epsilon- ('∀`;)
View detail
Often or bad, it is not (^^) Ordinary epsilon - ('∀`;)
Often or bad, it is not (^^)
Ordinary epsilon - ('∀`;)
View detail