Reviews
Fits: HONDA LEAD125, HONDA PCX e:HEV, HONDA PCX125, HONDA PCX160, HONDA ADV160
DXPlug
Simultaneous replacement with Ignition coil is effective. Acceleration seems to have improved. View detail
Fits: HONDA ADV150, HONDA CT125, KAWASAKI D-TRACKER125, HONDA GROM, HONDA GROM, HONDA GROM, KAWASAKI KLX125, HONDA MSX125, HONDA MSX125SF, HONDA PCX, HONDA PCX160, KAWASAKI Z125 PRO, HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50
Hyper Ignition Coil
Acceleration feels better in city driving. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA DAXST70, HONDA DAX ST50, HONDA SUPER CUB C70, HONDA SUPER CUB C50, HONDA CHALYCF70, HONDA CHALYCF50, HONDA GORILLA
Normal good
Cost-effective Level is sufficient for city driving. View detail
Fits: APRILIA RSV4, APRILIA RSV4 Factory R, APRILIA RSV4 R 1000, APRILIA TUONO V4, BMW G450X, HUSQVARNA FE250, KTM 250 EXC-F, KTM 250 SX-F, KTM 250 XC-F, KTM 250 XC-F, KTM 250XC-FW, KTM 450 SMR, KTM 450 SX-F, MV AGUSTA F4AGO, MV AGUSTA F4S, MV AGUSTA F4SPR, MV AGUSTA F4 Senna, MV AGUSTA F4 Serie Oro, MV AGUSTA Brutale S, MV AGUSTA Brutale Serie Oro
Reliable
I use it on my Kawasaki Jet ski.
I'm replacing it at the same time as Oil, so as much as possible.
The lower price would be more helpful.
I feel safe in purchasing this product.
View detail
PowerCoil relocation
Purchased to replace Cable due to PowerCoil relocation.
Not possible or not possible for Repair Parts.
View detail
SEROWRacing cable
I replaced it at the same time I replaced the Ignition coil. It is a product that has been around for a long time and is reliable. To be honest, it is not about the performance, but the effect of the replacement of the Ignition coil and the stress-up effect.
It looks especially good on vehicles with air-cooled engines and plug cords that are fully visible.
I do not feel any difference when driving.
Joint for connection to OEMCoil and Terminal for connection to Plug are required separately.
View detail
Changed on 20000 km
The best from NGK, i changed mine ( 4 pcs ) on 20000km and as honda genuine its the same as this one and same part number I will change the next one again on 40000km ! Thank you webike japan it took only one week from order to receive in Saudi Arabia. View detail
Fits: HONDA MONKEY125, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA glom, HONDA CROSS CUB 50, HONDA CROSSCUB110, HONDA WAVE125R, HONDA CZ-i110, HONDA WAVE125S, HONDA WAVE125i, HONDA ANF125innova
Changed from iridium to DX
I don't know, I just installed it yet, but I have a DX on my MONKEY50.
The MONKEY50 started right up and ran great.
I expect MONKEY125 to do the same.
MONKEY50 and MONKEY125 have different model numbers and cannot be used together.
View detail
Fits: HONDA CRF250R, YAMAHA ROYALSTAR1300, YAMAHA ZEAL, YAMAHA XZ550, YAMAHA XV1600WILD STAR, YAMAHA XV1600WILD STAR, YAMAHA XV1600 R100 ROADSTER, YAMAHA XV1600 R100 ROADSTER, YAMAHA XT250, YAMAHA XS250, YAMAHA XS250, YAMAHA XS250, YAMAHA V-MAX 1200, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA TT250, YAMAHA SRX250, YAMAHA SRX250, YAMAHA SRX250, YAMAHA SRX250
DJEBEL250xc.
Installed on a DJEBEL250xc, cutting off the OEM ignition coil in the middle and connecting it. It is a recommendation to refresh the electrical system. View detail
Fits: HONDA ADV150, HONDA CT125, KAWASAKI D-TRACKER125, HONDA GROM, HONDA GROM, HONDA GROM, KAWASAKI KLX125, HONDA MSX125, HONDA MSX125SF, HONDA PCX, HONDA PCX160, KAWASAKI Z125 PRO, HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50
Ignition coil
Items essential for power up. View detail
Used when replacing Plug cord
It is used in GPZ900R.
We have installed AS Uotani's Full powerKIT and used it to replace the Plug cord.
This time, the plug cord is NGK's power cable, which is specially designed for each model of car. It was quite difficult to stick the cord into the RubberBoots. 556 was not enough, so I sprayed CCIMetal rubber and the Plug cord went through the Rubber cover.
One thing to note is that it is not possible to crimp the terminals neatly when crimping.
From the beginning To some extent." It is important to keep it bent and crush it firmly at the end.
It is a must-have component when using the Uotani Coil.
I think it is a little expensive, perhaps because it is a monopoly. It would be helpful if the price were lower.
View detail
Durability is...
After 95,000km on a VFR800F, we switched from OEM Product to this one.
Vibration and fuel consumptionOthers are the same for normal driving, but the response from 4500 RPM is better.
View detail
Fits: HONDA Hornet-S, HONDA AX-1, HONDA CB650F, HONDA CBF600, HONDA CBF600 ABS, HONDA CBF600S, HONDA CBR250R, HONDA CBR250RRR, HONDA CBR600F, HONDA CBR650F, HONDA CBR900RR Fireblade, HONDA VFR750F, HONDA VFR800, HONDA XR250R, HONDA hornet
Excellent
i havE used NGK Plug CR9EH-9 7502 spark plugs they are the best for long run.i have used this spark plugs on my honda Hornet 250 1998 model they work very well no maintainance required.best performance.. View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
trust
I replaced it with this one right after I bought my CRF125F.
I used it for about 50 hours and replaced it for the second time.
I'm just going to replace it before it gets worse, so there's no change in particular.
I guess I'll just have to wait until the next exchange to ask them to work hard again.
View detail
NGK Plug Cap
Well Received! Thank you so much! Well packaging! Havent test it yet but will test it once im at home. Thanks again seller!About quality and texture View detail
Fits: bimota TEGY 1D906SR-S, bimota Tuatara 1000, KAWASAKI Bayou 300, SUZUKI TU125XT, SUZUKI Glass Tracker Big Boy 10th Anniversary Model, YAMAHA TW125, YAMAHA YF350E, YAMAHA YFM400FWA, bimota db-1, bimota db-1S, bimota db-1SR, APRILIA LEONARDO300, APRILIA Leonardo 250, BETA Alp 200, HONDA ATC200X, HONDA CBX1000, HONDA NX125, HONDA XR200R, HONDA FORTRAX 300EX, HYOSUNG MS1-125 Exceed
VOLTYOEM PartsPlug
If you buy from Webig, you can order with OEM Parts and get free shipping in some cases. View detail
Fits: HONDA HORNET-S, HONDA HORNET, HONDA XR250R, HONDA VFR800, HONDA VFR750R, HONDA VFR750F, HONDA RVF750, HONDA CBR900RR Fire blade, HONDA CBR650F, HONDA CBR600F, HONDA CBR400R, HONDA CBR250 FOUR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR250R, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBF600S, HONDA CBF600 ABS, HONDA CBF600, HONDA CB650F
Ignition System Refresh
Engine startability in winter was poor,
Standard Plug BP5HA to NGK Iridium Plug
Ignition coil for MC47 (Standard Tune in MC22)
Plug cord for the Uotani SP 2 (Plug cap uses OEM)
Startup is better and Idling is more stable.
The 6-speed 40 km/h is also easier to ride.
Torque did not experience any thickening.
View detail
Designated Plug
I bought it because it was the designated Plug for my MC18 NSR250. Of course, it is a new one, so the starting performance is good. View detail
Ignition System Refresh
I was having trouble starting the car in the winter.
Standard Plug BP5HA to NGK Iridium Plug
Ignition coil for MC47 (Standard Tune in MC22)
OEM Parts still available for purchase.
Plug cord for the Uotani SP 2 (Plug cap is OEM)
Material:Silicon is soft and easy to handle.
Remove the OEMPlug cordassy from the Ignition coil.
Disassemble the Plug cap and Plug cord.
Cut the UotaniPlug cord to the length of the OEMPlug cord.
If it is MC22, 1m will be enough.
Assemble the plug cord and attach it to the Ignition coil.
Caution!
The NC47Ignition coil is plugged in #2 and #1.
Since it is shallower than MC22Ignition coil,
It will be a little longer to match the OEM Length,
Adjust the length.
Uotani SP2 + UltraSilicon plug cord is ideal.
It is expensive anyway, so I think it can be implemented with a low budget and be effective.
Startup is better and Idling is more stable.
The 6-speed 40 km/h is also easier to ride.
Torque did not experience any thickening.
Setting with KeyStar's Fuel Conditioning Kit in OEMCarburetor
Pilot Jet#38
Jet needleRRR
Main jetLeft #1 to #118 #115 #115 #118
Pilot Jet2 Rotate Back
Full Exhaust System exhaust
Φ100Straight silencer exit Φ60
Turbo filter
Equipped with an air-fuel ratio meter, 12.5-13.5:1 (as of December 2023)
I think it depends on the individual Engine and Carburetor.
It is effective enough.
View detail
You will be able to try various CDIs.
By using this conversion coupler, you can use 5-pin CDI such as for CUB. You can also try CDIs made by Large Land, which are sold at low prices at certain auction sites, and you may be able to find an unexpected CDI that suits your engine. However, please use non-recommended CDI at your own risk. View detail