Standard Plug LMAR8A-9S 6817

  • Product number: LMAR8A-9S
    • IN STOCK
    • Out stock

฿598

Webike Points: +6 Points

Delivery information

  • Please wait...
to ThaiLand
CHANGE
Select address:
ThaiLand
    Shipping Fee ฿100

    Quantity

    100% Original 7 Days Warranty Free Cashback Net Price

    Applicable Models

    See all
    HONDA
    CB1100 10-21 CB1100 ABS 10-21 CB1100RS 17-21
    Show more

    Product Detail

    Specification

    [Stock Number]6817
    [Shape]Separate Type
    [NGK Part Number]LMAR8A-9S
    [Heat Value]8
    [Compatibility Information]HONDA Stock Part Number Compatibility: 31908-MGC-003
    [Size]
    Thread Diameter: φ10.0mm
    Thread Length. 26.5mm
    Hexagonal dihedral width: Hex 14.0mm
    Plug body and terminal image: T

    Description

    Webike stocks the entire line of NGK plugs.
    (There may be cases where we are temporarily out of stock due to manufacturer shortages, etc.)

    Stable ignition performance and combustion efficiency are achieved at an affordable price. It brings out the true performance of the engine.

    Features of the resister plug
    In order to suppress the ignition noise generated at the time of sparking, a ceramic resistor is built in.
    This plug has a built-in ceramic resistor to suppress the ignition noise generated by the spark.
    This prevents radio noise from entering bike radios, mobile hams, and bike telephones. It also prevents the engine control computer from malfunctioning due to noise.
    The effect differs depending on the bike.

    The shape of the plug terminal is shown below.
    Please select the correct terminal shape for the engine and plug cord.
    There are three types of plug terminal shapes: integrated type, separate type, screw type, and punch and caulk type.
    The "integrated" and "punch-caulk" types are mainly used for automobiles, and the "screw" type for motorcycles.
    The terminal part of the "separate type" plug can be removed, but the terminal part of the "integrated type" and "punch-and-caulk type" plugs cannot be removed. If you try to remove it forcibly, the terminal part may break.
    If you want to use the "separate type" as the "screw type", remove the terminal nut.
    When using the plug with the terminal nut attached, make sure it is not loose, and if it is, tighten it lightly with pliers.

    Features of NGK plugs
    - Super "wide range" plug.
    The center electrode has a "copper cored" structure in which copper is sealed up to near the tip so that a large amount of heat can be released quickly.
    As a result, a super "wide range" plug that is resistant to both burning and smoldering has been realized.
    Image of the features of NGK plugs
    A comparison of the thermal characteristics of plugs with a copper core and plugs without a copper core shows that plugs with a copper core excel in thermal characteristics and fouling resistance, and have a wider thermal range.
    Thermal value of plug

    - The high alumina porcelain of new ceramics is used as the insulator.
    The plug has excellent insulation properties at high temperatures and sparks reliably.
    The plug has excellent thermal conductivity and prevents over-burning.
    High resistance to thermal shock (rapid heating and cooling) and high mechanical strength.
    - Strong structure and excellent airtightness.
    The insulator and the main metal fittings are bonded with a special powder, which provides excellent airtightness and structural strength.
    The electrodes are made of a special nickel alloy and have excellent durability.
    Image of the durability of NGK plugs
    - The corrugations (folds) of the insulator ensure insulation and prevent flashover.
    During parking, high voltage is constantly applied between the terminal and the main body fitting.
    The high voltage will try to leak along the surface of the insulator, and the higher the required voltage between the spark gaps, the more likely flashover will occur.
    In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fitting to ensure insulation and prevent flashover.
    What is flashover?
    A flashover is a spark between the terminal and the main metal fitting, as shown in the photo.
    Image of flashover
    Flashover

    Advantages of the plug

    See user's impressions
    Fitting model: CB1100 RS、CB1100 ( See Fitting Models )

    Note

    * The image is only for reference. The image shown may differ from the actual product.

    Caution

    *Even if you purchase in units of 10 pieces (1 box), it will not be delivered in 1 box.
    *Terminals, tightening angle, etc. may differ depending on the model.Please refer to the link for the detailed fitting and installation instructions.

    Applicable Models

    HONDA
    CB1100 10-21 CB1100 ABS 10-21 CB1100RS 17-21
    Show more

    Review

    5.0

    / 5

    (2 Reviews)

    2

    0

    0

    0

    0

    Filter:
    Sort:

    ALSO VIEWED PRODUCTS

    Products Ready to Ship from Stock

    Recommend for You

    BEST SELLING

    MOST VIEWED PRODUCTS

    Recently Viewed Products

    New Custom Article

    See all