Reviews
Not slippery at all.
I would recommend this one, although the tank is slippery so I couldn't get a knee grip at all and was feeling a little stressed,
As soon as I put this product on, it stopped as if it was stuck and I was able to get a good knee grip! I was able to grip my knees with this product.
It is recommended because it stabilizes the driving.
View detail
The look and feel requires Zero preparedness.
The product is extremely cheap, and I thought it was a SiliconCoaster that you can buy at a 100-yen store. It was so solid that I thought it was a cross section of a fish cake, and there was no texturing process, etc.
Undoubtedly, it will make the installed vehicle look cheap.
I can honestly say that the texture and build quality are definitely not worth the price of the product.
If judged by product production Cost, it is clear from the appearance that the R&G company's product is definitely much more costly, and the dress-up satisfaction is higher.
As for the feeling of use, it shows an effect (high gripping force) that is commensurate with its material. In my case, I have a habit of sliding the product on the contact surface when I move my posture, so I prefer a slightly weaker grip like R&G's. However, R&G's support for GSX-8S is more effective (high grip strength) than R&G's for Tank side. I prefer the slightly weaker grip support force of R&G products, but the R&G product for GSX-8S has a pad on the tank side but no pad on the frame cover side (lower side), which is unfortunate.
Therefore, R&G tank grips are only used in very rare situations, such as when a turnaround of winding is necessary, when a high-speed corner is turned in, and when turning, and therefore, the support as a tank grip is not obtained. It is a mere decoration. (I am 176cm tall and have an 85cm inseam.) ) We would like to inform you that we had no choice but to purchase this product for this reason.
In addition to the above, care must be taken during installation. The included degreaser is extremely aggressive to the frame cover and will definitely discolor the resin parts to a whiteish color. However, for those who focus on keeping the body clean and well-maintained, it is likely to receive a very Large mental Damage.
For this reason, we can say that if you are nervous or are also considering a Case to remove SiliconPad, you should be careful about using the supplied degreaser.
View detail
Fits: YAMAHA TRACER GT, YAMAHA TRACER 9
Knee grip accompaniment
I know some people don't like to put flats on Tank, but I am a yakara who doesn't mind putting flats on Tank.
This time (also) I applied EasyGrip's EvoType for a Hold feeling.
Once you do a Ride with it, it is so effective that the OEM's slippery Tank is so uninspiring.
I could have chosen a transparent Type to match the color of the Tank, but I went with Black because I was concerned about staining.
Positioning is somewhat Quantity:Pair (for Left and Right) It is necessary to adjust the adhesive with the "+" and "-" buttons, and it is time-consuming to press the adhesive slowly to prevent air bubbles from forming, but it is not something that requires a great deal of skill.
Although it will give you the feeling that you have tampered with it in your own way, I suggest that you give it a try if you are feeling a lack of oneness with your partner.
View detail
Fits: HUSQVARNA Svartpilen 125, HUSQVARNA Svartpilen 200, HUSQVARNA Svartpilen 250
PetitCustom
I didn't want to put Wound on the Mud black part and I was worried about wearing Knee grip. But I bought it because I found it more tiring to drive for more than 30 minutes with the Knee Grip.
I haven't run the car yet, but it was easy to install without losing much of the design. It was a bit confusing to find the right direction to put it on, but as expected from Exclusive Design, it fit perfectly here! I was a bit confused about the direction to put it on, but as expected of Exclusive Design, it fit perfectly in the right place! Now I can use the knee grips without hesitation.
View detail
Highly effective for circuit driving
We put it on every vehicle we run Circuit.
Just having EasyGrip changes the hold feeling of the vehicle.
It is a stable runner and leads to TimeUp.
The Grip does not wear out immediately, so it can be used for a long time.
View detail
Knee grip
I didn't have a setting on my Stomp Grip, so I was looking for something else and found it cheap, so I bought it. View detail
Someone who is used to pasting.
The instruction manual is in English, but the material is too thin and does not listen to me even if I follow the instructions. There is no Spare, so I gave up. If I could stick it well, there was no wound on the screen even though I rubbed it a lot this time, so I guess it is resistant to wound. View detail
Weak adhesion
The one on the Tank is Large sturdy, but the one on the resin part is too weak adhesion!
It came right off ….
The color is more Color than Black.:I think it would be better to say Gray
View detail
Knee grip support TANK GRIP PERFOMANCE PRO
PRO is installed on L3Z.
I wondered how it would be in terms of Size since it originally has a CW Tank Cover, but the top part was slightly covered.
The Cover is attached by floating it slightly.
The projection is quite small, but the effect is quite good.
There is also Small SaiSize to be put on Side cover, and it is a Recommendation.
View detail
Eazi-Grip Meter Protection Film for Z650RS
The MeterFilm from another company was made of a thin underlay-like material, and there were many places where air could not escape, but this product is a flexible material, and air escaped immediately using the included Spray and spatula.
Spray so positioning is easy.
Only the middle Film has a slightly different terminal shape, but this does not appear to be a problem.
View detail
Double-sided tape comes off after five minutes of application.
Double-sided tape comes off after five minutes of application. View detail
Nice product
Hi every one,this is a very good product, it prevents me from sliding forward and it does its job on the track, a worthwhile purchase. View detail
[Color] Clear does not recommendation
[How is it used?
I bought this so that I could use a little less force on the Knee grip, but when I applied it myself, it had too many air bubbles, so I bought it a second time. [Color] Select Clear
Was the one you received as per Image?
I knew the Grip force and the Hold force when Cornering, so the performance is as per Image.
Was the installation difficult?
I applied it once by myself and it left air bubbles and came off, so I had PRO reapply it when I took the car to Coating.
However, even so, it seems that it was impossible to completely eliminate the air bubbles or wrinkles and apply it perfectly, and although there is no sign of it peeling off so far, it honestly looks bad.
It would be extremely difficult to apply it neatly to the curved surface of Tank without processing.
How was your experience with it?
So far there is no sign of it coming off.
Lines like Wrinkle also became unobtrusive Levels once you step away from them.
The Grip force is perfect, but whether it is good or bad depends on the person, but my thighs do not hit the Knee Grip Pad in Straight and normal Cornering without Hang-Off, because my thighs do not usually hit the position where it is attached.
When Hang Off, it hits the sticky thighs, but it can only be used there.
[Included Parts:were they on?
Comes with degreaser and Manufacturer logoSeal.
[Was there anything that disappointed you?
The first time I did it as a DIY project and thought it was my lack of skill because I failed, but I asked the store to do it for me and it was only slightly better and the manager "The curved surface of the Tank is too tight and this is the limit. I don't think it will ever come off." And that was just the minimum.
I thought, "What is the purpose of Exclusive Design for a car model if it cannot be applied neatly because the curved surface is too tight?
The solution was in someone else's Review, [Color] If it is not clear, but with color, the wrinkle will not be noticeable and will look beautiful.
Or you could cut and make it yourself.
As long as the wrinkle doesn't float and start to peel again, I will continue to use it, but if I have the opportunity to replace it, I will use the Black color next time.
View detail
good product.
It's before riding, but the material and make are good. But the bottom brand part hole is not good. It was easy to attach and it was good to feel the resistance of the pad. View detail
Fits: HONDA CB125R , HONDA CB150R
Effective
The seat position is also fit thanks to the fact that it is no longer slippery even in jeans, and as a result, the Motorcycle Fee Ring is now more easily felt and performed well. View detail
To assist with knee grip
Purchase EVO.
The pad itself is soft but a little thick, and if left as it is, it does not fit the tank shape and floats in some places.
If heated with a heat gun, it becomes even softer, making it easier to apply to curved surfaces.
Since the foot usually hits only the lower part of the tank, I wonder if it would be effective in situations where the tank is held.
View detail
Fits: HONDA AFRICA TWIN ADVENTURE SPORT
Great!
Easy to affix.
It prevents Tank from being scratched.
Knee grip can also be done well.
View detail
Performance is OK Red to [Color] Clear fails
For PANIGALE V2 [Color] I put up Clear, but the double-sided tape of the pad does not follow the concave part of the tank curvature, so the tape sags inside rather than airs out, and the appearance is a failure. The problem is that you can see through it.
I plan to change to Black because it is fine in terms of performance and the Pad surface is not sagging.
View detail
Quite effective! No slipping.
[How is it used?
Purchased for late cbr600rr pc40. had a cheap Universal Type pad but it wasn't good enough.
Was the one you received as per Image?
It is as shown in the Image. It looks like it will Grip well just by its appearance.
Was the installation difficult?
It was easy. Just wipe it down with the included Seat and stick it there.
However, there is no such thing as a Handling Instruction Manual, and the direction to paste it probably turned out to be wrong. I will reapply it next time.
How was your experience with it?
Very good! Grips well and the knee grip makes it less tiring. I bought the EVOType in black because my car is black. I thought the bumps would be noticeable, but they were not. The rubber grips well, so it sometimes got stuck when I was going back to the car in a Large position.
[Included Parts:were they on?
It included a Seat to wipe the area to be applied and some kind of paper written in various languages. Translation (it was not written in Please type here.
[Was there anything that disappointed you?
I would have known what direction to stick it if there had been an image diagram of it after sticking it on the attached paper, but there wasn't, so I didn't know better and stuck it on the exact opposite side. I am able to use it normally, so there is no particular problem.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
You can feel the effect.
Without leather pants, my knees would slide forward even when I was gripping them, but now I can firmly grip my knees with Jeans without slipping.
The price is also relatively reasonable.
Double-sided tape can be used to attach the product quite strongly.
View detail