- Home
- Product reviews
- Motorcycle Parts
- Bodyworks
- Fuel Tanks, Caps & Accessories
- Knee Grip Pads
- The look and feel requires Zero preparedness.... (Eazi-Grip: Knee grip support TANK GRIP PERFOMANCE)
【Eazi-Grip】Knee grip support TANK GRIP PERFOMANCE Review
The look and feel requires Zero preparedness.
The product is extremely cheap, and I thought it was a SiliconCoaster that you can buy at a 100-yen store. It was so solid that I thought it was a cross section of a fish cake, and there was no texturing process, etc.
Undoubtedly, it will make the installed vehicle look cheap.
I can honestly say that the texture and build quality are definitely not worth the price of the product.
If judged by product production Cost, it is clear from the appearance that the R&G company's product is definitely much more costly, and the dress-up satisfaction is higher.
As for the feeling of use, it shows an effect (high gripping force) that is commensurate with its material. In my case, I have a habit of sliding the product on the contact surface when I move my posture, so I prefer a slightly weaker grip like R&G's. However, R&G's support for GSX-8S is more effective (high grip strength) than R&G's for Tank side. I prefer the slightly weaker grip support force of R&G products, but the R&G product for GSX-8S has a pad on the tank side but no pad on the frame cover side (lower side), which is unfortunate.
Therefore, R&G tank grips are only used in very rare situations, such as when a turnaround of winding is necessary, when a high-speed corner is turned in, and when turning, and therefore, the support as a tank grip is not obtained. It is a mere decoration. (I am 176cm tall and have an 85cm inseam.) ) We would like to inform you that we had no choice but to purchase this product for this reason.
In addition to the above, care must be taken during installation. The included degreaser is extremely aggressive to the frame cover and will definitely discolor the resin parts to a whiteish color. However, for those who focus on keeping the body clean and well-maintained, it is likely to receive a very Large mental Damage.
For this reason, we can say that if you are nervous or are also considering a Case to remove SiliconPad, you should be careful about using the supplied degreaser.
รูปลักษณ์และความรู้สึกต้องอาศัยการเตรียมพร้อมเป็นศูนย์
สินค้าราคาถูกสุดๆ และฉันคิดว่าเป็น SiliconCoaster ที่คุณสามารถซื้อได้ที่ร้าน 100 เยน มันแข็งมากจนฉันคิดว่ามันเป็นภาพตัดขวางของลูกชิ้นปลา และไม่มีกระบวนการสร้างพื้นผิว ฯลฯ
จะทำให้รถที่ติดตั้งดูถูกอย่างแน่นอน
ฉันบอกได้เลยว่าเนื้อสัมผัสและคุณภาพการสร้างไม่คุ้มกับราคาของผลิตภัณฑ์อย่างแน่นอน
หากตัดสินจากต้นทุนการผลิตผลิตภัณฑ์ จะเห็นได้ชัดว่าผลิตภัณฑ์ของบริษัท R&G มีราคาแพงกว่ามากอย่างแน่นอน และความพึงพอใจในการตกแต่งก็สูงกว่า
สำหรับความรู้สึกในการใช้งานนั้นแสดงให้เห็นถึงเอฟเฟกต์ (แรงยึดเกาะสูง) ที่สอดคล้องกับวัสดุ. ในกรณีของฉัน ฉันมีนิสัยชอบเลื่อนผลิตภัณฑ์บนพื้นผิวสัมผัสเมื่อฉันขยับท่าทาง ดังนั้นฉันจึงชอบด้ามจับที่อ่อนกว่าเล็กน้อยเช่นของ R&G อย่างไรก็ตาม การสนับสนุนของ R&G สำหรับ GSX-8S นั้นมีประสิทธิภาพมากกว่า (มีความแข็งแรงในการยึดเกาะสูง) มากกว่าของ R&G สำหรับฝั่ง Tank ฉันชอบแรงรองรับการยึดเกาะที่อ่อนกว่าเล็กน้อยของผลิตภัณฑ์ R&G แต่ผลิตภัณฑ์ R&G สำหรับ GSX-8S มีแผ่นรองที่ด้านข้างถัง แต่ไม่มีแผ่นรองที่ด้านข้างฝาครอบเฟรม (ด้านล่าง) ซึ่งน่าเสียดาย
ดังนั้น ด้ามจับถังของ R&G จึงใช้เฉพาะในสถานการณ์ที่หายากมากเท่านั้น เช่น เมื่อจำเป็นต้องหมุนวน เมื่อมีการเลี้ยวเข้าโค้งด้วยความเร็วสูง และเมื่อหมุน ดังนั้นจึงไม่ได้รับการรองรับในฐานะด้ามจับถัง มันเป็นเพียงการตกแต่ง. (ฉันสูง 176 ซม. และมีตะเข็บด้านใน 85 ซม.) ) เราขอแจ้งให้ทราบว่าเราไม่มีทางเลือกอื่นนอกจากต้องซื้อผลิตภัณฑ์นี้ด้วยเหตุผลนี้
นอกเหนือจากที่กล่าวข้างต้น ต้องใช้ความระมัดระวังระหว่างการติดตั้ง สารขจัดคราบไขมันที่ให้มาจะมีผลเสียต่อฝาครอบเฟรมอย่างมาก และจะทำให้ชิ้นส่วนเรซินเปลี่ยนสีเป็นสีขาวอย่างแน่นอน อย่างไรก็ตามสำหรับผู้ที่มุ่งเน้นการรักษาร่างกายให้สะอาดและดูแลรักษาอย่างดีก็มีแนวโน้มที่จะได้รับความเสียหายทางจิตอย่างมาก
ด้วยเหตุนี้ เราจึงสามารถพูดได้ว่าหากคุณกังวลใจหรือกำลังพิจารณาเคสที่จะถอด SiliconPad ออก คุณควรระมัดระวังในการใช้น้ำยาขจัดคราบที่ให้มาด้วย