Reviews
I'm quite happy with it
It is used for CB400SF.
I installed the Full Exhaust System so that I can prevent the damage from the bumps.
You can measure the circumference of the Exhaust System and purchase it.
The texture is good, it's solid unlike the cheaper Rubbers, and I've had it on for about 5 months now with no problems. I have been using it for about 5 months now without any problems.
Quantity:2pc. I bought a Set to protect the root and end.
If you fall while driving, the body of the car should slide, so if the rubber does not gap, it will not be scratched, but if it is only a standing fall, it seems to prevent it well. The steel plate is also included, and it is reliable.
I'm glad to see that it comes in a variety of colors.
I recommend this product for its low price and solid quality.
View detail
This heat shield works perfectly. Durable, easy to install and effective. Probably the best in pipe protection on the market. View detail
Wrold Walk Z900RS Exhaust Guard
First of all, there is no installation instruction manual.
The diameter of the body is too thick, so it cannot be installed depending on the shape of the silencer.
I was relieved because it was for Z900RS, but I was disappointed. By the way, the silencer is Yoshimura's Bure Screw (Slip-on Silencer Type), but the clearance was not enough and the silencer was slightly dented.
If you are considering installation, you need to check the clearance between Body and Silencer.
Satisfaction points are …
I don't have anything in particular to say about this, but it might be good for dress-up purposes.
The high price is unknown because it is not … rolling.
View detail
Exhaust Guard. 。 I love the texture!
This Exhaust Guard has a good texture.
It doesn't melt or anything, and it is firmly attached.
It is good because it can be attached to various types of exhaust systems.
It seems to be large and strong enough for a standing fall, but if you fall while driving, I'm worried about the Gap, but it's much better than nothing.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
For practicality and unity.
[How is it used?
I have installed YOSHIMURAR-11 on my current car, CBR250RR, but the TapePipe is bare, and dirt such as soot stands out, so I was looking for an external Heat Guard, and found this product.
On YOSHIMURA official homepage and webike, CBR250RR (17-19) Although it has become outside the conformity, this product has become the installation recommendation product in the Page of 20-year type Spec.R-11 of the YOSHIMURA official homepage, and in R-11 of the 17-19 type and 20 year type, there is only a slight change in the structure of the inside, and Exhaust Because I had received the answer from webike before that there was no change in the form of the SystemBodyTail Pipe, I judged that it could be installed without a problem, and purchased it.
Was the one you received as per Image?
It was generally in line with Image.
Was the installation difficult?
Simply turn the Band on the Tail Pipe and tighten the Bolt on the Plus to secure.
How was your experience with it?
The area covering the Tail Pipe could have been a little larger.
[Included Parts:were they on?
YOSHIMURA Sticker is included in the package.
[Was there anything that disappointed you?
I was able to unify the exhaust system and the rear area with Carbon and Black, so I'm satisfied!
The name of the exhaust system is YOSHIMURA.
However, the delivery time was very long, about 2 weeks after the order was placed. Other than that, I have no complaints.
View detail
effective
I installed it on my AJS Cadwell 125.
I bought this because my foot touched the base of the exhaust pipe and exhaust system when I got off the car and I got burned twice.
Since it is directly connected to the Exhaust pipe, I thought it would get hot with this, but it doesn't get hot at all.
It doesn't get hot if it's running because of the combination of the thermal conductivity of Titanium or because the amount of heat and the amount of cooling by the wind are balanced.
If you stay in Idling for a long time, it will get hotter and hotter, but if you stay in Idling for a sensible amount of time, it will be fine, and it will cool down quickly.
It was not that difficult to install, although I had a hard time positioning it for the first time.
There is no Instruction Manual, so please search for the installation instructions, and since it is a Universal Product installation, no special modification was required.
I haven't installed it yet, but I think Titanium material is worth the price because it is resistant to rust in the long run.
View detail
unconcernedly
It's a bit smaller than I expected, but I like the casual look it gives the Titaniumium Exhaust!
But it could be cheaper...
View detail
Required processing
If you want to make it universal, you should consider the bracket. View detail
no problem
When I replaced the Silencer, the narrow part at the base of the Silencer was longer, so when I stopped and put my foot down, my foot would hit the narrow part.
I didn't pay any attention to it, and one day I noticed that the part of the leather pants where my feet hit was shrinking and deforming from the heat.
My feet were hitting the thick part of the Silencer even before replacing the Silencer, but I didn't have Damage, especially on the leather pan, but apparently the thin part was hotter.
This is why I decided to install this product as a countermeasure.
After installation, there is no Damage on the leather pan.
It looks almost the same as the heat shield that is standard equipment on Harley's EXPipe, so I like it without the large feeling of discomfort.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3
clearance sale
The gap that was vacant by the Exhaust System replacement is solved by this. Parenthesis is good. View detail
Exhaust System and Quantity:Set
When I changed the Exhaust System, I changed it together.
I wanted to have twill weave glossy, but it was not in stock, so I chose this one.
I'm glad that even the plain weave glossy is totally Parenthesis good.
I was able to install it without any hassle and without any hole gap.
The Bolt circled in red in the image is the Bolt required for the OEM Exhaust System, but will not be required after replacement.
I'm kind of wearing it.
View detail
Heat resistance
Large sturdy even as OEM, but ensures peace of mind View detail
It's a casual Custom, but …
I wanted to buy an exhaust system but it was too expensive so I decided to use this product to customize my exhaust system. I'm very happy with the Large version. I'm very happy with it. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Exhaust System and Quantity:Purchase with Set
Exhaust System and Quantity:Purchase with Set
There is a description in the Instruction Manual, but there is interference with the pipe due to individual differences in the vehicle.
I think the interference is soft by the angle of the installation of the Exhaust System.
View detail
The price is too high
I knocked over my son's YZF-R3 (I knew it was parked behind the garage that day, but forgot about it at night, so I didn't hesitate to pull into the garage until it was too late) and the Right Side was in bad shape. I thought I would be able to get away with only the Slip-on Silencer and Side cowl (Monster energy's Sticker is a rip-off Level price), but I was naive. I bought it because I thought it would be weird if I didn't have it. 5 minutes is all it takes to install it, even if you are a beginner. View detail
Fits: YAMAHA XT250X
Hello, I can fix your XT.
Thank you very much for sending the product as soon as possible.
It's a SEROW 250, but it's still Carburetor Vehicles, 16 years old.
I had a hole in my Exhaust System and Silencer the other day and was looking for parts.
Thank you very much.
View detail
protection
Excellent heat resistance, Pannier case and contents are safe View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Exhaust Heat Guard
I would like you to add something that does not come with the Full Exhaust System Full Exhaust System and Quantity:I bought it in Set and it's sleeping in the warehouse. View detail
good-looking
OEM Product is not so good, but I'm glad I bought this Heat Guard because it looks great.
However, it is thinner than I had imagined and I would like it to be made more firmly.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
YOSHIMURA YOSHIMURA Option Heat Guard Set
If the Center Stand is attached, you have to think about the mounting position or it will hit.
Looks Good.
View detail