Reviews
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
just to be sure
I wasn't sure if it was necessary, but installed it just in case. View detail
Fits: MV AGUSTA F4 1000S, MV AGUSTA F4-750, MV AGUSTA F4-BRUTALE [Brutale]., MV AGUSTA F4 1000AGO, MV AGUSTA F4 TAMBURINI, MV AGUSTA f4 brutale910s [brutale]., MV AGUSTA f4 brutale 910r [brutale]., MV AGUSTA F4 1000R, MV AGUSTA F4 1000S SPR, MV AGUSTA F4 SerieORO [SerieORO]., MV AGUSTA F4 RR1078, MV AGUSTA F4 1000R312, MV AGUSTA F4S, MV AGUSTA F4SPR, MV AGUSTA F4R, MV AGUSTA F4 SENNA [SENNA]., MV AGUSTA F4 1000S, MV AGUSTA F4-750, MV AGUSTA F4-BRUTALE [Brutale]., MV AGUSTA F4 1000AGO
AGUSTA
It clearly conducts less heat than the OEM Aluminum. Good purchase for the hotter months ahead. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
perfect accessory
My motorcycle is a YAMAHA XMAX300. I bought a YOSHIMURA exhaust before. Because the front part of the exhaust is exposed outside, the rear seat passengers are easy to burn when they get off the bike, so I bought a YOSHIMURA TYPE-1 carbon fiber exhaust on webike Tube anti-scalding cover, made of full carbon fiber, very beautiful. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. I used to buy Yoshimura's exhaust before. Because it was exposed to the front during the exhaust, it was easy to burn when the rear passenger got out of the car. prevent hot cover, all -carbon fiber is made, which is very beautiful. Powered by Google Translator View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Not suitable for painting.
In a completely unnecessary place as a Heat Guard.
It is installed at One point.
On Material, even if the contractor scratches the material considerably, the groove is not so good.
The paint was crystalline and did not shrink.
I don't think it's the right choice; it's been in use for about two years.
I also managed to get a crystal coating that didn't shrink.
It is starting to peel.
View detail
Preparedness for falls.
This product can protect the vehicle body and exhaust system in the event of a fall.
Rider is like an insurance policy in case of a fall because of its Small pattern.
Exhaust systems are expensive and I don't want to purchase ・・・・ again.
(It is better if the time when it can be used never comes.)
View detail
Exhaust System Slider
I purchased this product in conjunction with the purchase of Full Exhaust System.
It is unclear if this will protect Silencer.
I was able to install the Refreshing without it looking too bulky.
I'm satisfied
View detail
Exhaust Cover Dry Carbon
It is impossible to install anything but a Normal muffler.
I asked the Motorcycle shop, but they said it is not a Level that can be processed.
Can I bite the spacer and float the large size? It is said that the appearance is sacrificed.
I heard that even if you shave the body and change the position of the holes, you can make the body about half as small.
AKRAPOVIC product S-K10SO28-ASZTBLSlip-on Silencer is
Exhaust pipe part is too thick, they say it hits too hard.
AKRAPOVIC products are not unusually thick.
I can't conclude that anything other than Normal muffler will do.
View detail
Exhaust System Protection
Purchased for Exhaust System protection.
The Tie Band that came with it was fine, but I installed it with a Stainless Band that I purchased separately, just in case.
I haven't made any moss yet, so I don't know how effective it is, but it is definitely better than nothing.
Design is also good for Race ish.
View detail
![Carbon Heat Guard Set[Optional] .](https://img.webike-cdn.net/catalogue/images/72702/1_TS.jpg)
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R
YOSHIMURAHeat Guard
Since it is for the YOSHIMURA Exhaust System, I knew that it would not easily attach to the ARROW S/O, so I had to get creative.
The Heat Guard itself is very beautiful and of excellent quality.
The Bolt that comes with it is a bit cheap, so it would have been better if it was black or something.
View detail
Prevent the Body Cover from melting in the heat & standing up!
If you don't have this, you can't put on the Body Cover until you get home from touring for more than an hour!
A must have! The design is cool without being obnoxious.
View detail
Fits: HUSQVARNA 701 Supermoto, HUSQVARNA 701 Enduro
Exhaust SystemCarbon cover
It is easy to install. It is easy to install. View detail
To avoid scorching Pants.
The exhaust pipe of EXC-F has no guard at all, so the moto pan will soon be burnt and perforated. Guard is necessary because the exhaust pipe also gets burnt and dirty.
OEM is a high-end product that costs more than 10,000,000 yen, so it is hard to afford, but this is a commendation at a reasonable price.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Looks like a jewel
Couldn't decide if I needed it to hide the slip-on nut and bolt but am happy with the purchase. Does stop the heat from the heal of my boot and looks like a piece of jewelry on the z900rs with a yoshimura R77 slip-on and Akropovic headers. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
I also followed SP Tadao.
The other day, I bought the Heat Guard because the Pants had melted on the Exhaust System.
I was looking for a No Brand Exhaust System for SP Tadao, but all I found were subtle, so I decided to go with YOSHIMURA because of their reviews. What is the compatibility guarantee? YOSHIMURAR-11Sq I am glad that I was able to put it on, although there was no guarantee that it would arrive at SP Tadao since it was for the "SP Tadao".
Parenthesis is OK now that it's better, but I wish I had worn it first… No regrets.
I am satisfied with it because it serves the purpose of Heat Guard and Parenthesis is good. But I think it is a little expensive.
View detail
Exhaust System Protection
Installed to protect the Exhaust System in the event of a fall.
I would be happy if you could protect the Exhaust System as much as possible.
It is easy to install, so there is no harm in having it attached.
View detail
A must for Drac Pipe.
Drag pipe insulation, Vantage and Heat Guard are a must!!!!
Well designed and looks great on the T & FPipe!
This is for burn protection!!!!
Good product!
View detail
Fits: DUCATI HYPERMOTARD1100/S, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R125
It was perfect for Exhaust Protector.
It is sure to be useful to hide scratches on the Exhaust System and as a protector in case of accidental standing up. View detail
Following Rear Fender
What made you decide to buy?
I purchased a Speedra Rear Fender in September. After purchasing it, I found out that Speed La's Material:I was amazed at the quality of the Carbon product and was truly captivated by Speedra! (Lol) Following the Rear Fender, the Exhaust Cover has been on my mind for a long time! I just popped it in the spur of the moment the day before the sale ended because it takes time for the next delivery once the stock runs out. In case you are wondering, Speedra's Material:If you're an Owner thinking about buying Carbon, get it while it's still in stock!
How was your experience with it?
The exhaust cover is made of dry carbon, the same material as the Rear Fender, so it is much lighter and stronger than the OEM steel exhaust cover. Furthermore, the back of the cover is covered with a heat resistant heat seal to withstand the heat of the exhaust. Dry carbon is completely different from conventional wet carbon, and is produced using the latest carbon processing technology, boasting ultra-light weight and ultra-strength. Dry carbon is also used in aircraft, F1, Sue Parka, MotoGP, etc. I can't get close to my 6R MotoGP machine, but I can't stop smiling every time I look at the dry carbon Rear Fender and Exhaust Cover.
[How was the installation?
To match with Rear Fender this time Twill weave/glossy in the Instruction Manual. All of our dry carbon products are handmade and finished. Slight variations and errors may occur." The OEM parts were made as well as the OEM parts, and I could feel the craftsmanship of the craftsmen. Also, some of the OEM parts from the OEM exhaust cover (Damper, color) The mounting holes fit perfectly and the installation was completed without any modifications.:All Carbon products, both matte and glossy, are UV-cut processed, so they can withstand UV rays and can be used safely.
[Others]
Like Rear Fender, Speedra's Sticker and Material:A Carbon Key Holder is included.:Carbon's Key Holder, it's a quality that really should be sold.
View detail
Fits: KTM EXC 250, KTM EXC 300, KTM SX 250, KTM SX 300, HUSQVARNA TE 250, HUSQVARNA TE 300, HUSQVARNA TC 250, HUSQVARNA TC 300, GASGAS EC 250, GASGAS EC 300
And don't forget FlangeGuard!
I did my best to install it.
Because of the strength of carbon, if FlangeGuard is not attached separately, the entire Chamber will be pushed down and the Flange on the Engine side will die when it falls over.
View detail
Fits: HONDA CROSSCUB(JA45), HONDA CROSSCUB , HONDA SuperCUB110 JA10 series, HONDA CROSSCUB110
I'm very satisfied with the sobriety of the product.
I was thinking of changing the Exhaust System, but I thought the cheapness of the system would be a good thing.
I was wondering about Plating for Exhaust Cover and found this product.
Installation is a simple matter of removing the OEM cover and replacing it, and the reduction of the plating portion has tightened up the overall look.
I am very satisfied with the
The product itself is well made and the price is very good for a makeover at a reasonable price.
View detail