Reviews
usually
It is used for MT-09SP, but it is a very ordinary tank pad
Quantity:Pair (for Left and Right) The triangles on the SP are not attached to the SP's paint
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Yamaha Europe LED Blinker
Excellent product and quality. LED blinker is bright amber in color which passed the CE marking. Recommended product and easy to install. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
It's so bright
As shown in other people's imprints, Small Type, Design, highly textured and stylish It is
Installation dealt with the Blinker relay for LED without using the attached resistance
What I'm a little concerned about is this Blinker, it's very bright when it glows
It's so bright that you'd think the car in front of you would be a nuisance
Very good product, except that the price is quite high
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
SMART
It's not too small, but it's not too large, so I'm satisfied with it
I used an LEDRelay and did not use a resistor
I wanted the OEMCoupler on it rather than the resistance
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA MAXAM, YAMAHA BWS125(BWS), YAMAHA CYGNUS X SR
Color:Unpainted but highly textured
I bought it in White:Unpainted, but the OEM Blueish white cocktail and the color is The texture is surprisingly good because of the similarity and sheen
I painted it because I wanted to match the tank and the color perfectly, but …
But if possible, I'd like CaseBody to be Standard Equipment from the start Where
It seems a bit pricey to buy this alone
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Yamaha LED Turn Signals
Turn Signals are very bright and noticeable. Easy installation on my 2019 Yamaha MT 07. Great product and great customer service by WeBike! View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
No problem at all with OEM Product only
I bought a Carbon Style,
Texture is the best.
It works without problems with the attached Relay. Relay itself is not as big as it is told. In my case I put it in Space under Rear Sets.
To good things, Quantity : 1 Set of 4pcs. I would like you to lower the price and sell it.
View detail
Very High Quality
The Yamaha Europe Tank Pad is very high quality. Perfect fit and look difference compare with other tank pad and fast shipping View detail
High Quality
The Yamaha Europe Tank Pad is very high quality. Perfect fit and look difference compare with other tank pad and fast shipping. View detail
It is recommended to make a single buy
Everyone who bought YAMAHA.MT-07 knows that the change is a must! , After changing the performance, of course, you need to change the appearance. When the cheating is to buy a full set of patches, it happened to be bad. So I couldn't make a single purchase at that time, otherwise you can save a lot of money. This time, I will pay more for the postage , Who said that only Webike has this product. The riders who bought YAMAHA.MT-07 know that change is a must! After changing the performance, of course, you have to change the appearance. When you want to buy a full set of patches, you just need to buy this piece. So you can't buy it at the time, or you can save a lot of money. This time, you have to pay more for the whole pain. Who told me that only Webike has this item.(translated by Google Translator) View detail
Appearance rather than functionality
Tank Pad is a meaningful product in terms of anti-slip and scratch protection at the time of Knee grip.
However, regarding this product, you may not be able to expect much antiskid effect.
I think that it can be Recommendation for those who want scratch prevention effect and designability.
I chose this product with importance on Design.
Although it seemed to be a little expensive, I was satisfied with my purchase.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
The price is expensive - - -
Headlight, Tail lamp is a LED bulb, but it was only a light bulb, so I was concerned despite being invisible while driving, so I replaced it because of my mental health.
I could work with Electric Works Pliers and Spanner, Socket wrench, Hexagon without feeling difficulties.
In Front Side Panel's lining installation method, Washer with nails is bite in three places and I did not know how to officially remove this Washer, push up a little by little in the direction to remove the nail with a thinner Driver ahead Did.
Washer with detached nails flattened the nails with Pliers and used again, but the problem was not felt in particular.
Resistance is also attached to this product, and 4 places (Quantity : 2 Set) When exchanging Quantity : 2pc. Use Set resistance.
Our tarcer has attached resistance to Rear blinker but in order to fit in the gap under Seat you need to warrange longer while tentatively assembling using Wiring of OEM's Blinker. If there is something to be aware of in installation it is about this.
After installation, we are satisfied with OEM that Blinker got smaller and fearless and became fearless face. I can not see it while I am on the train - - -
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Large changeable satisfaction
There is only the option of EuropeYamaha OPTION, build, change to Large in design.
Also, easy to understand manual Electric Works Pliers Others are attached to terminals, in Hemp palmkk,
Besides, when exchanging with LED Blinker, it was easy to complete if you can crimp the terminal even with the Electric Works Pliers instead of the mandatory Relay instead of the Cement resistor.
View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
I think it's good.
I installed it in MT-25 of YAMAHA. Because Front was too long, it cuts a little and connects. Rear lacked Length, purchased separately Bullet Terminal and Wiring and extended. Resistance to Front LeftRight or RearQuantity : Pair (for Left and Right) I have to attach to. Just wrote that resistance has sometimes heat, Rear side is stored under Seat and Wiring is dense, so select Front side. However, the Front side did not have the space and had a bit of hardship.
After installation it is moving normally. The appearance is smart. Just wish Cost will fall a little more. I think that it can not be helped because it is an OEM product. Comprehensively Large satisfied.
View detail
There is only OEMOption and it is solid.
There is only OEMOption and it is solid.
I do not have the price, though - - -.
EUROYamahaTop Case 39L is installed, but there is almost no play.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
StylishJapanese Vehicle Inspection Correspondence
There is only OEMOption and outstanding reliability
The price is high but I think that buying when thinking about reliability
However, it is not Extra Processing Not Required, so be careful
View detail
Fits: YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
The shape is also good as Parenthesis is good!
If you thought that the shape is also good as Parenthesis well analogous products have been commercialized from Wa Big! This one is cheaper - - -. The feeling of having felt early - - -. I wish I had goodly scrutinized it. View detail
Makeover
I purchased it with Side Cover Mesh and installed it. Because I needed to remove Tank Cover and Side cover respectively, I was not confident of working a little, but as a result, there was no problem with Cover removal picture attached to the product, there was no problem.
Work time was about 1 hour each with Tank CoverMesh and Side Cover Mesh. In my case, I did not know that the picture above was attached and I had not seen it beforehand, so I think whether it will end sooner if preparing in advance.
After installing to Cover, I thought that the color was stronger than the imagination, like a picture, though it was somewhat flamboyant, but when actually attached to the vehicle, the Mesh part was not so conspicuous as to be downward, so it was satisfied as Image I am in.
View detail
Among the many MT-09 screens, the sense of unity with the car body is Number one
Until now I have been using the outside screen of overseas Manufacturer, but when I review it again at some time Screen seems to be overly head to head, looking for a thing with a sense of unity with the car body I found this product and bought it.
【What made you decide the purchase?】
Although I knew this Screen itself from before buying a car body, I thought that it was not particularly cool either at first but thought that it was an ornament with no wind protection effect.
However, when I review it again at a certain time, it will be a compact impression with Sharp by wearing it, I thought that the feeling of unity between the car body and Screen will increase and it will be more comfortable to purchase.
【How was it actually used?】
I think that the sense of unity with the car body increased and the atmosphere became more Sharp.
But it is natural but there is no windbreak effect. It would be better to think that it is about the blindfold Cover behind Meter.
Rather my purpose was to cover the gap between Meter and Headlight and to hide the Wiring classes behind the Meter so we needed it enough quality.
【Mounting was difficult?】
If you have Hexagonal Wrench and Phillips Screwdriver you can exchange very easily.
Quantity : Pair (for Left and Right) Let's carefully read the Instruction Manual and exchange it so as not to mistake the Bracket of.
【Please tell me the installation point and hang】
Screw fixing Screen and Bracket is Material : Let's be careful not to tamper as it is Plastic.
Since I may frequently detach from Custom, I exchanged Screw for Stainless Steel 's thing.
[Is there anything I was disappointed about?]
There is no windbreak effect, but I do not think that it was disappointing because I did not purchase this screen for that purpose.
Screw to fix Screen and Bracket for a moment is Screw Material : Because it is Plastic, I think it was Standard and BoltorScrew which is cool-made from Gold Genius.
【Hope for Manufacturer - Please let me know if you have any improvement points]
this [Contents] In 1. I thought that 50,000 is too high to be honest.
I think that it is still convincing price if it is about 10,000 yen JUST ....
【Have you compared items?】
None.
F. It is transfer from FABBRI's Sports Screen.
Screen was pretty good and I liked it in Extreme atmosphere, but since Screen is on the standing side, if it is combined with the thin MT - 09 of the buttocks it becomes a bizarre appearance and it will be replaced with the product of Y's Gear I made it..
[Others]
Material : I think that it is roughly good product except for PlasticScrew.
If you want to emphasize the Compact and Sharp of the car body by dividing the windproof effect, I think this Screen is an iron plate.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
I liked it because the design was high though it was expensive
I attached it to MT-09 TRACER. Although it was expensive at the time of purchase of the vehicle, I had to wait for purchase, but other products etc.. While I was looking at, I thought that this was a good purchase. Installation was not so difficult, but it is MinusPoint that I must process Wiring ~. I hope I can make it a little cheaper! View detail