Reviews
Convenient
If not, we can use a substitute.
I bought it to try it out.
It is easy to use because it is a dedicated product, and it is easier to work with if you have it.
I think the price is too high in terms of cost performance.
Other than that, the product is satisfactory.
View detail
stoppage
It's just an ordinary Colgate Tube.
It's easy to buy, so it's helpful.
Quality is fine for normal use.
View detail
Convenient
Purchased to keep Wiring neatly organized.
Wiring, including additional electrical components, tends to be messy.
Wiring will be cleaner by using this product to put it together, and
It also prevents accidents such as shorting or accidental cutting.
Waterproof effect can be expected and cord deterioration can be prevented.
I am satisfied with the effect besides looking better.
It is recommended that the appropriate diameter be selected for Wiring.
View detail
Secure insulation
I bought it because it is essential for Bullet TerminalWiring insulation.
It's very easy to use and has a lot of stuff in it.
It will never be enough.
Solid Material:Silicon, so it will not tear or deteriorate over time.
They will insulate you for a long time, so you don't have to worry.
It's easy to work with because all you have to do is attach it to the Bullet Terminal.
View detail
Easy to use
I bought it with additional electrical components such as Grip heater.
It is safer to get power via Relay.
The product is solid and has no problems at all in normal use.
The good part is.
Where the Instruction Manual is very careful, anyone can put on Relay by looking at it.
I can recommend it
View detail
For SEROW225 Engine Starter Motor
[How is it used?
SEROW225 (1992, Model:1KH) on the
Fell in an Enduro race and unfortunately hit the Engine Starter Motor against a stone, causing the Button to cave in and rendering the car unrecoverable.
When I opened it later, I found that the plastic parts inside were missing. Since it was the same year as the previous model, we decided to replace the entire used assembly.
After doing some research through image searches, etc., I learned that there are many different types of connectors for the same SEROW, such as different PIN numbers. I found it difficult to see the image of this connector part of the used assembly, and I thought it might be different, so I bought this one as an insurance.
In conclusion, this product did not come into play this time because the Connector that came with the Assy was exactly what we wanted and we were able to pimp it out. It is a temporary Stay since there are likely to be other places where it is used.
Was the one you received as per Image?
It was just as Image. Type 110, 3-pin. It is
Was the installation difficult?
I am not familiar with wiring work, so if I were to do it, it would be a bit difficult.
How was your experience with it?
unused
[Included Parts:were they on?
At a minimum, only ConnectorTAB, receptacle components.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
For the first time, Emon's electricianQuantity:Set is recommended.
https://www.webike.net/sd/1353762/
View detail
Is it kinder to have the Crimp way written down?
Unlike other ordinary couplers, TAB, receptacle is Quantity:Is it because there are not many scenes to replace TAB and receptacle with WaterproofCoupler at the same time?
I had no problems, but first-time users of this type of WaterproofCoupler may not realize that the Waterproof Plug is also crimped at the same time as the Crimp Timing on the terminals.
View detail
make no mistake
It is fine to use it in areas where it is absolutely necessary, but it is not allowed to fail because spare terminals are not included.
It would be very awkward if you accidentally forget to do it, especially since you have to Crimp the Rubber for Waterproof together.
View detail
I like that the terminals are Straight.
[How is it used?
For Headlight H4 Harness processing
Was the one you received as per Image?
Yes
Was the installation difficult?
The terminals are Straight, so I was able to Crimp with the tools I had on hand.
How was your experience with it?
Satisfied
[Included Parts:were they on?
CouplerBody and terminals only
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Flag terminals, which are common on H4Couplers from other manufacturers, are difficult to crimp without a special tool, but these are Straight terminals and can be used with standard Electric Works Pliers.
View detail
To replace the degraded OEMRelay
[How is it used?
Replacement from OEM that had deteriorated and had a weak Relay sound.
Selected this product so that it can be replaced with LED Blinker in the future
Was the one you received as per Image?
A little smaller than I had imagined.
Was the installation difficult?
All I had to do was replace it.
How was your experience with it?
Works fine in two ways:front and rear 23WHalogen, LED approx. 2W + Halogen 21W. Have not yet tested with front and rear LEDs.
[Included Parts:were they on?
Elastic band and 2-poleCoupler+Wiring that can be installed just like OEM (Bullet Terminal processing etc. required if used)
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Relay has no operating noise
View detail
Brake terminal is still this one.
After all, it's not a flash in the pan for Brake switch unless it comes with this flag-shaped protective Vinyl.
Note that the vinyl insert is a bit long and must be pushed in to fit.
Also, Wiring is horribly hard.
View detail
It took me five years to use it up.
Red is Plus and Green is Minus in Image, so I bought the safe Black.
Black is inconspicuous and can be used for anything.
View detail
It's not always sold in the Home center, so you can have it as a spare.
Used for 6PCoupler of MONKEY-based Engine.
Some Engines are processed and cut, so this is essential in such cases.
View detail
Thank you for the good product
Thank you for the good product. I used this to enlarge the size of Yamaha's rz50 battery. The result is satisfactory and the fit is good. View detail
The size was larger than I expected.
I'm using a Type 3 Grom for PositionWiring of a Koso sequential blinker with Position. I had a problem with the above blinker. So I used it. For more details, please refer to the Blinker Impressions above. No problem with normal rectification. If you use the Alligator Clip to reverse the test before connecting, the Blinker will not light up, so the quality must be Large and strong. View detail
Universal Bellows Boots for Cable added to Clutch Cable
The NC750X has many areas of reduction in cost.
The clutch wire cable (let's make it hydraulic!) Dust Boots are also not included.
Both the Lever and Mission sides are bare.
The Lever side is made from Offfor Vehicle's Boots, but the Mission side is made from Bellows.
I found just the right one at Universal Product.
Minimoto's UniversalBoots with a total length of 50mm and a hole diameter of 3mm on the thin side (Wire side) and 6mm on the thick side (CableScrew part).
It was Exactly. I plugged it in while spreading it out without any processing.
This will protect you from rain, dust, etc. You can use it with peace of mind. I recommend it.
View detail
A good one to have for wiring.
I bought this to pull the USB power supply from my PCX150's ServiceCoupler.
This is useful for wiring around the front of a scooter.
It is also inexpensive, so I think it is a good thing to have.
View detail
For parts that should not be removed or degraded by Rust, etc.
What do you do with your brake hose clip from brake fluid tank to master? The hose clip is easy to remove and install, but it can be easily removed by Prank or Accident. Since it is not a place to disassemble normally, it is very safe to disassemble and Firmly Crimp. However, the Ear clampPliers are required for this part.
Also Material:The stainless steel construction makes it resistant to rust and keeps it looking good.
View detail
A thickness that is often used
0.The 75sp is a thick wire that is often used when doing electrical work on motorcycles and cars, but until recently I had been reusing the harness from an old car navigation system. Because a considerable length remained, I have used it for various things, but I came to purchase it because the stock finally ran out, and I chose Black and Blue for some reason because I had many opportunities to use it for Minus.
This time I made a Wiring with Coupler to attach the Blinker relay to the car body, I used about 15cm of it and it has 5Meter so it looks like I won't need to buy it for some time to come. This kind of item can be bought in just the right quantity, and there are more opportunities to choose Emon, which can be used with confidence in terms of quality. Of course, after all, a new one is soft and easy to handle unlike a used one.
View detail
Useful Goods of Wiring branch
Useful Goods to help you branch Wiring.
Simply pull up the claw on the Orange, insert the uncoated Wiring, and replace the claw on the Orange to complete the connection.
All plugged-in Wiring will be short-circuited.
No tools required, it's truly one-touch.
When it comes to branching the wiring, it is common to make a Y-shaped branch line with Bullet Terminal or to use Electra tap, but if there are many of them, the wiring will inevitably become ugly.
In addition, there is a part where it is not good in terms of reliability to use the Electra tap which clamps two or more wires to one terminal, but this product can be used at ease also in that aspect.
When you have secured the Attachment power supply by the Bach direct Relay, or you don't like to take the Earth of the retrofit electrical equipment by the body ground, and you want to wire directly to the BatteryMinus. (It's me.) It is especially recommended for
If you connect +Line from Relay and -Line from BatteryMinus to this 5P, you can secure the accessory power supply for 4 terminals which can be connected and disconnected by One-touch.
Also, this product is very small, so I think it is not so difficult to hide it.
The only thing you need to pay attention to is that it is not Waterproof Specification.
You need to set it up in a secluded place where it won't get wet, or use gum tape or something to protect it from water.
By the way, it is a very convenient article that even 400 yen/piece of DAYTONA price is totally possible, but the one of Large book WAGO Japan (I assume they look/function exactly the same). is available on Amaz◯n, and that one is roughly 1.5 times the price of Quantity:1 Set of 3pcs. (For 5P)
If you want to stick with DAYTONA, you can buy it from webike, but if you don't find any significance in it, you might be happy to check out WAGO Japan's stuff.
View detail