【amon】Relay Review

Reliability used to date

Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.

The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.

There are many inexpensive Relay products available, but we chose the smallest and most reliable one we have ever used.

It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.

Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance. View detail

For electric heating Wiring

It was used for Wiring for electric heat.
I had originally been using an electric heating wiring system, but I was concerned that the current was flowing even when the key was off, so I installed this system.
It is Emon nature and it is safe. View detail

When in doubt, just go to Emon

[How is it used?
Used to install LED Fog Lamp on FZS600.

Was the one you received as per Image?
Since this Relay is compact in size, you should have no trouble finding a place to mount it. In this case, I installed it inside the Left side cover.

Was the installation difficult?
The instruction manual is easy to understand, so I don't think you will make a mistake in assembling the wiring. It was more time-consuming to put the wiring around the car body.

How was your experience with it?
No problem at all, the light came on easily. I have driven more than 5000km since installation and so far no Trouble has occurred.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Point or hang of installation:The length of wiring should be comfortable.
Availability and comprehensibility of Instruction Manual:The package is mounted with a detailed and easy-to-understand Instruction Manual.
ITEMS TO BUY TOGETHER:Electric Works Pliers are useful for handling the connection terminals of Wiring. View detail

Amon relay it's good

This is 12 volt relay. This time I am using in controlin on/off the subwoofer in car. I am worry about electronic switching power supply keep it standby. Because of that avoiding the drain power using this relay.load 12v/8A continue.no more heat . there is no flyback diode.it came with bullet connector. View detail

BachaoRelay's companion

I've installed these on every Motorcycle I've ever owned.

This is the standard Relay for use with Bach Direct Relay.
I'm sure you can find as many ways of Wiring as you want if you search for BadDirectRelay.

HDLight (Low beam) If you replace the fuse with a power supply extraction fuse and connect this product, you can complete a direct relay without damaging the harness of the car body.
Because there is also capacity there, it plays an active part Large as Attachment power supply.

By the way, in the case of branching, One-touchConnector of WAGO Japan is small and the connection is easy, and is recommended.
If you search for "WAGO Japan" on Amaz◯n, you can buy the exact same one at the original price.

Both this product and the One-touchConnector above are non-waterproof, so be careful where you install them.

Nowadays, it is almost necessary to install USB power supply and other electrical components, so we are very grateful for the parts that can be used to build a direct relay at a low price like this product. View detail