Reviews
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
Simple form and easy to use
I was looking for a simple and reliable tool like an in-vehicle plug wrench from a well-known tool manufacturer, and I found this product and immediately bought it because of its low price.
The price is a bargain, but the quality is so high that it fits perfectly with the plug diameter, as you would expect from a KTC product.
The rubber inside the wrench gently holds the plug in its mouth so that there is no danger of dropping it when it is removed.
Also, the tool is available in two different thicknesses at both ends:16mm = CPlug and 20.8mm = BPlug, so it can be used with CUB and MONKEY. (CPlug) and 2-stroke VESPA (BPlug) This is more convenient for me as an owner of a
However, since it is a straight type, it may only be used on cars with a large space above the plug hole.
The L-shaped bar is also very easy to use because of its ingenuity in making it possible to use it even for car models that are difficult to get space to turn.
The simple shape makes it easy to pack, so it would be excellent as an in-vehicle or portable tool.
Durability is still unknown, so it was not rated yet.
View detail
Is the length of the short method better?
I tried to make a 15-socket holder, but I didn't think about the length of the holder. I didn't think about the length of the holder, because it was about 30cm long, so I couldn't fit it in my tool box. 10-socket holders are available in the Quantity:2pc. I should have bought Set. But
It is definitely better than the Gold genus because it is made of plastic.
View detail
Poor mechanics buy toolsRose
9.The 5 tools were added in the Grip set since the number of tools has increased since the Rose purchase. The work is easy Plus No.2 Driver.
Only 1 pc.
View detail
Convenient
I've been working on the ground, squatting, sitting or kneeling,
My buttocks would get cold when I squatted, and it hurt when I kneeled, so I covered it up with an old Towel or something like that.
I just happened to find this Matte on our site and gave it a try,
If you fold it up, you can sit on it, if you lay it down, your knees won't hurt, and it's a friendly place to keep the tools you use,
It's a good thing, isn't it? (Laughs)
View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
Good accuracy
I had been using cheap valves and Type radio pliers, but I decided to go with a proper Manufacturer's product, so I chose KTC's Radio pliers.
Even with a strong grip, there is no gap at the tip, and the precision is as expected.
View detail
Comfortable Goods for progress in maintenance!
Maintenance is performed at the Apartment's bicycle parking lot.
I used to lay out a bath towel, but in the winter, the cold of the ground came up from my buttocks and was quite painful.
When I use this Matte, I don't feel cold. And with the cushioning, it doesn't hurt when I put it on my knee or something.
When folded up, you can sit on it as a little chair, which is a good height for cleaning the Chain or something.
It's lightweight and compact with the use of a belt to hold it in place, so I have no complaints about it.
View detail
Brass Brush, this is the one.
[How is it used?
For cleaning each part during EngineOH
Was the one you received as per Image?
As per Image
How was your experience with it?
No problems at all. It is an excellent cosmetic product.
[Points to note]
None in particular.
How did it compare to other products?
This is all I do Repeat.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I break them regularly.
Hard parts like these are fragile as is the fate of materials, and will break easily if force is applied to them at an angle.
The Chain ToolPin should not break if it is applied straight, but it is a Pin that breaks at an angle if you are not careful, and as a result of proceeding with the cut process without noticing this, it breaks at a rate of about one time every two years.
In short, the work is messy, it is failing and breaking, and the cause is all my fault.
The pin itself is extremely rigid and straight, so there is no reason for it to break if you check it carefully and work accurately.
Well, even if you break it, you can buy Repair Parts like this, so there is no problem at all.
Body is for extremely sturdy PRO, so it can be revived again and again.
I've been using it for almost 20 years now.
I have not had a single difficulty in obtaining them, as they are often in stock on Webike, whether people fold them or not.
KTC is also great to keep making Parts!
View detail
Easy to use
It is very convenient for maintenance of motorcycles because a small amount of grease comes out only as much as you press it, so you can apply it without getting your hands too dirty. View detail
I should have bought sooner
Until now, the company's L-Type Quantity:It was opened and closed by twisting and turning it with Set's.
I had been thinking of getting a Type T for some time, but had held off because I thought the work time would be much the same.
However, as I got older, I changed my mind and decided that I wanted to have as much fun as possible, so I took the plunge and bought a frequently-used Size one.
When I used it, the work efficiency was different!
I regret that I have wasted my time so far.
View detail
Trusted KTC
[How is it used?
Purchased a new Driver because I lost the one I had been using.
I bought this product because I thought, "If I'm going to buy something, I'm going to buy KTC!
Was the one you received as per Image?
It was as per Image as it was a product I had originally seen.
How was your experience with it?
It is easy to grip and use, and I felt that it is a Driver that I will be able to use for a long time to come. The construction is solid, so I think it is a large difference from cheap drivers.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Similar to Pliers.
It is the same as Pliers and is well made and easy to apply force.
It also operates smoothly, so it is not a cheap product.
It is useful for detailed work, etc.
I have some Rust recently, but would like to maintain and use it.
View detail
Used for many years
It is easy to grip and apply force, so it is Firmly attached.
It is quite useful because it is sometimes used in various scenes unexpectedly.
Accuracy is good and no Wobble.
View detail
I have never licked it.
It is often used for Motorcycle maintenance.
I have never licked with this one, so the quality of accuracy etc. is indeed KTC, I can't use cheap ones like No Brand.
View detail
nice to have in toolbox
Great tool to do the final tightening of oil filters to spec. Also great for removing difficult filters and not having to resort to the screwdriver method. This is a great tool for the older . The cheap auto parts store sockets push off the filter when you insert the extension, so if you need to lean on it, it is an issue. I like this oil filter socket wrench because I can use a socket drive or a socket with it. I have another oil filter wrench that only lets me use a socket wrench drive. It protrudes down into the wrench too far and contacts the filter. This causes the wrench to want to lift up off the filter. Very frustrating. The KTC filter, however, will also allow me to use a socket , eliminating the problem of the wrench lifting off the filter. I highly recommend this filter wrench. View detail
Storage that also serves as Accent for Garage.
[How is it used?
Used to hold washfor Vehicle items in Garage.
How was your experience with it?
Wash-for-Vehicle items tend to be placed in a mess in the water area, so we decided to put them away in this conspicuous Container to keep the Garage tidy and looking beautiful.
I like KTC, and the inside of Garage is lined with KTC cabinets and other products, so I don't feel out of place.
Spray bottles and other items can be stored at the right height, and most of the wash-for-vehicle items can be stored.
The only drawback is that the price is a bit high there.
It is well made, though.
View detail
I just wish I'd known about it sooner.
I bought it because it looked easy to use and most importantly, it looked cool after watching the video of the Suzuka 8 Hours Endurance Race.
As expected of KTC, the movement is smooth and will be active from now on.
I appreciate that such a useful item can be purchased at this price.
View detail
Excellent Ratchet
This Ratchet has a high quality luxurious feel. I have used twice since recieveing more than a week ago and find myself reaching for it between projects just to appreciate the feeling of it in my hand. This tool is very useful in tight spaces working on the back of the engine block between the block and firewall, or underneath the windshield cowl. The swivel provides a favorable angle, and the ratchet offers low backdrag and lots of leverage. I am on the east coast of the USA and DHL delivered this package in only 36 hours. Webike is an excellent vendor. View detail