Reviews
What I found when I changed it.
The OEM taper handlebar does not fit the handheld closed type hand guard.
The reason is that the inner diameter of the Bar End is too narrow to accommodate the end adapter of the Hand Guard.
(Probably so thin that even other companies' hand guards would not fit in it.)
If you want to replace it, choose this Type to shorten the Handlebar width.
I saw a comment that the OEM width of 800mm is for foreigners with long arms and long for Japanese.
As a result, it feels right to me.
I chose Gold from the image, but the actual color tone is more like Orange.
View detail
Good vibes
Used to turn a KX85 Handlebar from an OEM 22.2 iron Handlebar to a 28.6 PROTAPER Taper Bar, also a PROTAPER Clamp OversizeHandlebar Mounting I was also happy with the Clamp, but I was not sure if it could be used with the KX85 because it said "rubber mount" and I was not sure if it could be used with the KX85. The quality of the Clamp is quite good, but the bolt that comes with the Clamp is not as good as the OEM bolt, so I used the OEM bolt. The position of the clamp is not so good, because it has to be raised by 20mm with this clamp. The size of the handlebar must be chosen with this 20mm increase in mind. View detail
Much more comfortable then the original grips
About quality and texture, I can confirm that the quality is great and that the material used is a durable rubber with a soft texture. About the feeling of use, I find the Pro Taper pillow grip set much more comfortable then the original grips and they are well matched to the styling of the Grom with their grip design. Products to buy together, A new throttle tube, specifically a quick throttle tube from Kitaco would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the pillow grip set for my installation was average due to the difficultly removing the original grips in one piece as I wanted to retain them for re-installation in the future if needed. Cost performance and comparison with other products, Pricing of this product is good. You receive a nicely designed rubber grip set that are comfortable but there are much cheaper grip sets available from other brands like Kijima if the price is too high for you. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Best with universal mount
When the included Suk WearGuard is installed, the clearance with the keyhole becomes narrower, so it is difficult to put our key with the Motorcycle shop and Hokkaido Touring commemorative key holder into the keyhole Smoothly. Considering practicality, it is realistic to use without SukWearGuard, which was the right decision later, but the combination with Pro taper's Universal mount is the best looking. The logo of Pro taper makes me feel good. View detail
Good quality
Very good quality and the best delivery. Received in less than 10 days. Will order again from this site. Thank you! View detail
Normal Handlebar
Very decent Handlebar at an affordable price
There is quite a wide variety, so you will be able to find something that suits you.
View detail
easy to grasp
It is easy to grip, non-slip, and a good product for use with Enduro and Motocross. View detail
MODEL Woods HIGH
Used on YZ250FX
Height 180cm
I use it in StandingMain in Course, and I feel that the width, height, and pull of the handlebar are all good for me, and it seems to manage the vibration of the engine very well.
It has been rolled quite a bit, including the lock, but it is only slightly bent and has good durability.
View detail
this one option
[How is it used?
This Grip is exquisitely soft and thick? It is hard to get blisters because of its softness and thickness. I have been using this Grip for 8 years.
I compete in Enduro races, and I have a habit of clinging to the handlebar, which easily causes blisters on my hands, but this Grip protects my palms even after a long run.
I also like it because it is surprisingly hard to slip on Muddy.
Was the one you received as per Image?
It's a Repeat buy so it's as per Image.
Was the installation difficult?
Cut and peel the old Grip with Cutter to remove the adhesive.
↓
Degrease and apply reliable and proven Cemedine SUPERX.
↓
Fix with Wire after inserting
How was your experience with it?
I've tried Half waffle products and others, but I keep coming back to this one.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It's not disappointing, but it's softer and a little less durable. But it doesn't wear out too fast.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Think carefully about what you do with the Wire you tie in Twister. Sometimes I see people who tie their hands in a direction and place that kills them.
View detail
Mounted on CROSS CUBJA10
Worn before going on a long-distance touring trip.
I was satisfied with the texture of the grip, design-wise, but after holding it for a long time.
The color of the leather gloves has been transferred and it looks a little reddish, and the eraser rubber scum is also a little reddish.
The stains like "I'm not sure what I'm supposed to do now, but I'm not sure.
Color:With Gray, it seems to stand out even more.
I was able to remove the transferred color and eraser rubber shavings with Parts cleaner.
I was still concerned about the dirt showing, so I replaced it with another Blackish Grip.
I will use Gloves again when I start using non-leather Material on a regular basis.
View detail
It's still cool.
[How is it used?
I bought a CRF125F and replaced the OEM handlebar with an Aluminum handlebar. The hand guard that I always use is only for Aluminum Handlebar.
I really wanted the 110 mini from Renthal, but the delivery date was undecided, so I had no choice but to go with this one.
Was the one you received as per Image?
The image is exactly as shown in the image. The quality is perfect.
Was the installation difficult?
Just replace it with OEM.
You can take a picture with your phone before you remove it so you can see where the Wiring and Wires went through.
How was your experience with it?
I knew from the measurement that I still lacked a little bit of start-up, but it wasn't so much that I couldn't ride, so I was satisfied.
I'm also thinking of chewing on UpClamp.
[Included Parts:were they on?
Bar pad is attached.
I am thankful that the CRF125F does not come with OEM.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Grip will need to be new and should be bought at the same time.
This time I decided to go with SCOTT's Mellow Grip. (https://www.webike.net/sd/24982240/)
Also, Grip bond, which is often forgotten. (https://www.webike.net/sd/20034236/)
View detail
Handlebar height and strength increased
OEMHandlebar was bent during a fall on a forest road, so it was changed.
The handlebar is thicker, so I also purchased a universal mount kit, which raises the height of the handlebar and makes it easier to stand.
crf250l md47 because it interferes with banjo bolt
The Clamp of the Hand Guard is changed to a Long Type UClamp, and since the length of the Hose from the Master Cylinder is not long enough, it is necessary to remove the Hose from the S-shaped Hook that is guiding the Hose. Also, if you put a Bar pad that fits this, it will be a little troublesome to insert and remove the key. However, considering the strength in terms of performance and ease of standing....
I haven't tipped over since I replaced the handlebar, so I don't know how strong it is.
View detail
I put these on my Race vehicles all the time.
I don't know how many times I have already purchased this product.
I always install this Grip on vehicles used for off-road racing.
The gap between the knobs is LargeKiku mud is boring, so it is easy to use during Muddy.
Rubber also has a soft, moist consistency, so the Point is my favorite because it does not tire easily of vibration and does not leave my hand.
The softness of the material also makes it easy to mold and fit in the hand.
But I don't think it's very Cool in terms of design (laughs).
However, after using it for a long period of time, the stickiness of Rubber increases. (Hydrolysis?) It will feel bad, so periodic replacement is necessary.
View detail
Parenthesis is good! And not tiring!
I fell down on a forest road and bent my Handlebar, so I had to choose it for my first Handlebar replacement!
I think Black would go great around the Handlebar on the RALLY50! I really couldn't be adventurous and go with another color…Beautiful Black...I prefer PROTAPER's Yellow color!
The height of the handlebar itself was suppressed to the extent that the height was raised by the clamp, which was good, but I did not feel much discomfort.
Now that it's horizontal, it's easier to stick my hand on the Handlebar when Breaking to maintain my posture! I wish I had changed it sooner!
By the way, I couldn't make a hole in the Switch box because I didn't want to waste it! I couldn't drill a hole in the Switch box!
View detail
no problem
The handlebar position has been raised for easier standing, and the wires of the OEM product can be easily routed. View detail
Parenthesis is good, it's been updated.
It's up-dated.
Before
The design surface looks like Rubber Print, and the rubber part deteriorates over time.
present
The design surface is made of nylon fiber. I hope the perimeter doesn't break...
Some people say it's to prevent blisters, but in my case, I just wear it because it's good for parenthesis.
It's self-satisfying, but it increases Tension.
View detail
It is not the same as the Pad of the genus with Handle.
The quality is different from that of the Pad in the Pro taper Handlebar's Included Parts:.
The quality of the Urethane is higher on this product, and the pro taper logo is on both sides of the Urethane for a cool look.
View detail
Safety and Dress-up
Bought it for safety, as I've hit my Helmet on the bar a few times with failed Jump landings!
Plus, Parenthesis just got better!
View detail
More rigid, lighter!
It's more rigid and stable!
That's what I call a Pro taper!
View detail
Sturdy, 2 cm Up!
It's so stiff, and it's 2 inches up, so standing is a breeze! View detail