Reviews
Durability.
It is very stable.
Center Stand is comfortable by becoming Side Stand because it lifts up.
Installation is easy
View detail
The product itself is very good
The product itself is very nice, and the installation on the Frame was easy.
I installed it on a Yamaha VINO (2021 model), but the drawback is that it requires advanced machining skills to remove various parts (mainly cowls), remove, remove, and finally cut… the Under Cover according to the pattern before installation.
The product itself is very good.
View detail
![[CAMEL]Camel Toe Side Stand](https://img.webike-cdn.net/catalogue/images/95829/CAP-T7-CTS-1_TS.jpg)
I was anxious to Lowdown.
The OEMLowdown Link&FFork was protruding 20mm due to its short legs.
I used to always pull to the Left Side when getting off the car, but this will give me peace of mind.
The installation surface is large and the parking space seems to be worry-free.
-20mmSide Stand Paint is RAPTORLiner.
For reference, here are images of NORMAL and after replacement.
Refer to Manufacturer video for replacement, STANDoffSensor is troublesome.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy
Used for VOLTY
It is for GRASS TRACKER, but I could use it for VOLTY without any problem.
Note that Bolt and Spring required for installation are not included.
The length was about 19 cm.
The paint and welds are very clean, but somewhat thinner than OEM. If the price were a little lower, it would have been a perfect score.
View detail
Zita md47Kick Stand
We've been waiting a year for Short Stand!
Great to use, feels just like OEM!
Aluminum Cut-out texture and Zita's NameValue are also GOOD
View detail
Satisfied?
It has been about 6 months since I lowdown the Motorcycle and noticed the tilt.
I purchased this product because I had a bad experience with my Motorcycle almost rolling over when I applied force when mounting the Bag on the Touring.
The Short Stand is one centimeter shorter than the OEM stand, but is it more effective?
Motorcycle is now stable.
View detail
I hope this is helpful to you.
for DUCATI Parts with a little modification to BMW.XR. View detail
Too cost-effective, but if you want to use RightSide Stand, is it possible?
It was somewhat cheaper on Outlet and
I use this GCraft Side Stand, so I had an extra OEMSide Stand to Order!
The RightSide Stand is a good fit for the CT110 HUNTER CUB & omega;
The product itself is Black PaintingSteel and can be installed with no problems and no dimensional deviations
One point is that it is easier to position the Footpeg Mounting Bolt by pulling out three bolts, loosening one bolt until it is just about to come off, and then temporarily tightening one bracket and collar before removing the bolt.
Collars are long collars on the front two sides of the body
The two back side of the car body are fastened with short collars
If you are diverting an OEMSide Stand as we do
The screw groove cut at the back of the Side Stand must be penetrated with a Φ10 steel drill.
Was the GCraft made without Screw grooves?
When we changed the LeftSide Stand, I think we were able to go straight to the LeftSide Stand, but we don't care about irreversible processing, so we just quickly changed the Drilling
Easy to install outside as long as the hole is widened
It's a long-awaited RightSide Stand conversion.
Because of Left Side traffic, there are quite a few situations where LeftSide Stand is difficult to produce because of the Left slope.
I think the opportunities for use are there.
View detail
Wider STAND surface for increased reliability
It is somewhat special, but I added this product to improve reliability when using the OEMSide Stand on the CT125CT110 HUNTER CUB for Right!
Originally, the Side Stand of the CT110 HUNTER CUB was the only clear complaint, with poor balance and angleω
I've tried Other Brand ProductSide Stand, and I'm willing to do whatever I can do.
I added this to the OEMSide Stand and installed it before the RightSide Stand Bracket Order!
I don't see anything at all wrong with the installation.
It doubles the width and somewhat increases the length, so it is safe to use for large products.
It looks good.
This would be much better, wouldn't it?
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
CarrierBOX, perfect for campers!
The Side Stand of the CT125 is too forward, and often almost falls over to the Left Side when the road surface is sloped or the Carrier is loaded.
This product is quite stable as it can Offset back 9cm. It is an excellent product that I am glad I bought.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Cheap and Easy Fix for a Broken Side Stand Switch on the Grom
About quality and texture: I am happy with the quality of the side stand switch canceller, the white electrical plug and black wiring are as good as the Honda OEM items. About the feeling of use: When the stand stand switch breaks the replacement Honda part is quite expensive and the safety aspect was not a great concern for me so this cheap and easy fix from Kitaco was a great choice. Products to buy together: Kitaco have some great items specific for the Grom and if you enjoy carrying out your own maintenance then the ECU error check tool would also be desirable to purchase along side the side stand switch canceller. Difficulty of installation: The process to install takes about half an hour, the time is mostly down to the removal and installation of the seat and the left side body panel for access to the electrical boot that contain the green electrical connector for the side stand switch to be disconnected and the switch canceller put in it's place. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a well designed product that removes the need to replace a broken side stand switch and saves you some money in the process. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you are an experienced rider I say the side stand switch canceller is safe to use but if you are new to riding and still learning I'd say to replace the broken side stand switch with the Honda OEM part to be safe. View detail
Stability is Up!
Stability has been improved, such as on gravel.
The wide surface support reduces sinking even in muddy conditions.
The thickness of the Plate is just right, not too thick, so the body of the car does not stand up too much when STAND is put out.
The stick that makes it easier to get STAND out will hit your calf if you are not used to it, but once you get used to it, it is LARGE sturdy.
View detail
Might be a blind spot. Useful to have.
SUPER CUB110 (JA44) However, thanks to the conversion to CROSS CUBOEMfootpeg, the Quantity:Pair (for Left and Right) Since there is a Bracket installed on Both Sides, I immediately purchased a relatively inexpensive Right Side Stand for CROSS CUB from KITACO and installed it.
If you use it, it is quite convenient. If you have to park on a slight incline and the right side is down, you may feel uneasy with a normal STAND because of the reverse bank, but with RightSTAND, you can park with a sense of stability and peace of mind.
Or, when parking on the side of the road and taking pictures from the other side of the river, with LeftSTAND, the motorcycle will be flustered, but with RightSTAND, the motorcycle will bow to you, and it will look good. (Is it just me?)
If you don't have it, that's fine, but it's useful to have it, so at this price, it's not a bad idea to have it on.
Incidentally, this Side Stand does not rub even if the RightCorner is banked considerably; the Stand stopper part of the Footpeg hits before the STAND (^^;
View detail
A must for Downsas.
NITRONDown Sas and Quantities:Short Stand is a necessity for down suspension. Before the replacement, the motorcycle almost fell over when fueling the stand, but after replacing the short stand, I have no more worries. The nut was so hard that I gave up on replacing it myself and asked the shop to do it for me.
A must have for Short suspension!
View detail
Side stand for elite s
Love side stand it is away from my after market exhaust Can make sharper turns without my stock stand hitting the ground and is just easier to use then the stock one. View detail
Fits: SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz
Good scooter side stand
Used for SUPER CUBC125
Side Stand of c125 is a little short or the body tilts a lot.
However, Side Stand for C125 is not available.
Utilize Side Stand for other car models
It does not come with Adjuster, so you need to measure the length properly.
Must be purchased.
View detail
MT-25/03.
21 Installed on MT-25
At first, I assumed it would be around 2,000 yen at a certain place.
Review. It won't stick if you don't shave it off. and so on No matter how you try, it won't stick." the reason was that ...
I bought it because I thought it would be better than losing money on a cheap product.
Screw lock should be sewn to prevent loosening
Installation was easy, and I was able to do it with the Motorcycle Cover still on.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Type B KITACO Side Stand Switch Cancel
There is nothing much to say about this piece for the monkey. This is going to be used for diagnostic and if there is a kickstand sensor malfunction. This product comes with a MFG. Warning *The use of the side stand with the engine running is dangerous and may lead to loss of motorcycle control and an accident. *Do not start the engine with the side stand in the upright position.There is a risk that the vehicle may jump out or fall over. *When starting off, ensure that the side stand is down before riding. View detail
Required replacement when using ZETA Off-roadSuspension kit
Required Tools
17Spanner and Glasses
・Tension Spring Tools
(I substituted a longer slotted screwdriver *Self-responsibility)
good point
Stable parking.
The film is thick and seems to be resistant to stepping stones.
A bad point
...It was scratchy from the start… (Individual differences?)
Must be used with ZETA Off-roadSuspension kit.
It can be parked in OEMSTAND, but I am afraid of too much tilt and load.
I think the product itself is good, but I was surprised that the one I purchased was covered with scratches from the beginning.
I didn't return etc. because it was going to get scratched up soon anyway.
View detail