Reviews
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
LED Blinker
I bought STD Blinker because it is interesting that it is very large. Installation required somewhat Wiring processing.
Also, because the storage of Register was Large strange, we recommend purchasing LED Corresponding Blinker Relay.
View detail
Measures against insects
MT-07 is the coolest without Screen, but if you do not install Screen, Meter will be outrageous ahead.
Yes, it is an assault charge.
If you do not install it you will have severe eyes.
Large off by the ratio of insect control 4 and wind protection effect 6.
And the windproof effect is so fair. Wind does not hit the torso from the neck down.
Well, I'd like to say that I'm going to close Bench first when Helmet's Ventilation full throttle is about to break my neck.
If it is 120 kilometers to 130 kilometers, this screen will be Large. There is no problem..
I chose Clear.
Again MT-07 is not cool without Screen. So, it's a bad challenge to Clear.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
No complaints about Design and quality!
LEDRear blinker vibrates etc. I reached the end of its life, so I tried to divert this product.
YamahaOEM Product (Option treated) Although it is Sharp shape, design is also high, there is also a sense of security in terms of performance.
Since installation is the same as after Universal Product, it can be diverted to any Motorcycle.
Light intensity is as expected and safe as it is without complaint.
I should change Front to this product (Lol)
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Used for Custom
I like the appearance very much.
I attached it to MT - 09A, but the resistance module which prevents High flasher is quite Large, and it was hard for me to put it together with Wiring at the time of wearing. (Because MT-09 is so narrow - - - )
After all, I installed a relay for LED at a later date and removed the resistance module.
I wish Relay was sold separately.
View detail
Paper is attached to determine the mounting position
I think the price is very high, but I feel good at Fit to MT-09.
It is divided into two and it is difficult to install Small people, but do not worry because there is a pattern paper to attach it.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
This time Mip : I made it to Carbon Style.
【Purchase motive】
Actually, with regard to Front, we are planning to build-in the light case, Parts also gathered, so for Rear Small for the first time and OEMOption's material of this product : I selected Carbon Style.
[About installation]
Since I was attaching this black color Blinker to 09R1 before, there is no problem for the necessary parts other than attachment, if it is about 1 hour by exchanging Plug receptacle who was sibling, RearQuantity : 2pc. I was able to replace the Set.
As for the replacement work, when RearSeat is removed, Wiring kind and Relay are contained, so remove Fender Eliminator's Blinker and re-attach this item. I did not use the enclosed resistor parts, it was ok with wearing the handheld Relay for LED.
The troublesome thing is that in the Rear box I think that it is the exchange position between Wiring and Bullet Terminal.
[Try to install]
It's bright enough for the first time in a while for Small.
I think that Japanese Vehicle Inspection Correspondence is also good.
Material : I am satisfied because I also match with Rear Kanato of Carbon Style.
【To Manufacturer】
I think that the quality of Blinker itself is good, but it is expensive. Components such as resistors are not necessary if you buy a Relay for LED separately, so we want the price to be low by that much without resistance.
View detail
It might be painful without a tool
Simultaneous purchase at the time of purchasing a new car.
The photo shows the state where the stick to be inserted in Side Back is removed.
Installation is attached as soon as you follow the Instruction Manual, but Left Side is stopped at Torque, so without Torque it can not be removed immediately. Furthermore, because Screw lock is being used, it is necessary to have a lot of power to remove Bolt.
After assembling the fine parts, fit the bracket in between Frame and Passenger Footpeg and tighten together.
Long Bolt (Not the Torque, ordinary) , So you can break Torx screw at its worst.
If you do not use Side Back, remove the stick and it will be like a picture.
View detail
There is not practicality but it is good..
Brand of trust "OEM" is.
If you definitely do it even degreasing "Easy installation".
Strictly speaking, "Knee grip" Where was Pad, was it better? - - - It is a good thing made in Belgium.
If you suffer from MotorcycleCustom, first "this" Oh, yeah..
Honesty "Mat gray" In Color of "sober" It may be.
"Choosing Adult" Please think.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
For ensuring visibility of Blinker when Pannier is installed
Previously, like Side marker, I used pasting Blinker as Blinker, but when I installed SIDEPannier, Blinker completely disappeared from behind and added Blinker in a hurry.
At that time, Y's Gear's LED Blinker was chosen from the good shape.
The car model of Yamaha comes in correspondence List, but it is unfearable Universal Product.
Included Parts : He was very kind, and Register which considered ordinary Blinker relay, Bullet Terminal, Spacer necessary for compatibility with Yamaha OEMBlinker was attached.
After installation, I went to the test for immediate lighting, but its light intensity was tremendous, my mind was shot through in an instant.
Blinker base is Material : It is soft with Rubber, so even if the Blinker breaks by shock it is supposed to return to some extent.
It is a Blinker that I like very much..
View detail
Beyond my control - - -
Installation itself requires machining on the Sprocket cover on the Shift side,
In order to remove Cover, it is necessary to remove Shift rod first,
Remove Cover and turn it over
There is a guide line. Follow Slide's Guide
Processed while checking the processing position and Color.
Others is attached to the installation.
Performance is Firmly not attached (each Quantity : 2pc)
Will I fall if I get Speed ??out?
Because Slider has MT - 07 letters, it is painted with White paint
I tried to make letters stand out.
Feet is sandwiched between Brake pedal and Slider
Sometimes worry.
View detail
Dress-up
It can be attached as OEM.
However, at the same time,
Hang is required for installation.
OEM of Material : From Plastic to Aluminum Refreshing feeling and
The heavy feel of Gold genus is good.
View detail
Installation is Large strange but - - -
I switched a couple of Motorcycle, but Tank Pad which I did not care so much until now
Look at the installation photo of this product on the blog "Parenthesis nice" I thought and purchased immediately.
I started pasting immediately after arriving the item,
When trying to paste the upper separate part in accordance with the mount sheet according to the Instruction Manual,
I could not get close to Tank with the thickness of the Center part stuck first,
Gap That's right, after all, pasted by eye observation.
When pasting, a little more ingenuity (hollow out the center part of the mount etc etc. Although I felt good even though I did it,
It was not so much Gap and for the design that Gap does not mind unexpectedly,
After pasting, I was satisfied with the Image street.
View detail
It is a necessity of Touring.
Structurally MT-09 is Refreshing around Tail,
If you attach a Side bag as it is it hits Tire
Large It can lead to accident.
So I introduced this for long distance touring.
Carrieretc. Although it will be useful if you attach it ...
It is now that I do not want to let CoolStyle collapse.
Even if it says anything, this kind of thing is unusual detachable!
Remove Bracket and its original coolness returns..
It is perfect as a performance, is not it?. Although conformity is Side bag of Yamaha OEM
I am wearing the TANAX Tour Shell Case.
I think that there is no problem if the shapes match. (It is YamahaOEM that you can firmly fix)
However, since One Side has a Helmet lock, Special Tools is required.
(In terms of crime prevention we will not issue names here)
Let's ask Shop to understand on your own when installing.
View detail
Good and authentic, sticks very well on the tank and provides good protection and design for MT-09. Recommended for a buy! Thanks.
Good and authentic, sticks very well on the tank and provides good protection and design for MT-09. Recommended for a buy! Thanks. View detail
More than wind avoidance ...
The wind avoidance effect felt within the speed limit.
However, compared with the full cowl Motorcycle, the windshield effect is minimal.
However, it is quite effective as a countermeasure against insects when running at nighttime than windshield effect. Around mentor etc etc. I'm pretty clichy, so when I got insects in such places ... I think cleaning is Large strange. If Screen has arrived, insects hit Screen and insects do not stick around Meter, so if you consider cleaning, I think that it is better to wear it.
View detail
There's only Y's Gear
Tentatively I wanted Screen so I bought it.
It looks exactly, and the figure with Screen is like an OEM.
As a windshield I feel almost unusual, but I am satisfied with the appearance.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Wiringetc. Trying to put it in SMART will struggle
Because Rear's Blinker was replaced with Active's License Plate Holder integrated type, in conjunction with this, we also replaced the Front side with Y's Gear's LED Blinker.
?Good point?
- Although I took it for Small, the LED is bright and outstanding visibility
- Attachment of Yamahafor Vehicle egg type comes with attachment of Body easy
- Good design that does not astute
?This is not good?
- Despite OEMOption of Yamaha cars handled as Universal Product
- So Wiring is also made on the premise of Main harness cutting → Bullet Terminal processing
- Ceramic resistance too much
In my MT - 09, already DAYTONA 's ICBlinker relay (69571) Since we were using it, we did not use Ceramic resistance.
However, if you use Ceramic resistance as OEM's Relay, Space is hopelessly narrow on the Front side of MT-09 and I think that it will be very difficult if you try to put it in SMART for ease of later maintenance.
There is also a danger of heat generation of Ceramic resistance and there is no space, so we recommend that you exchange it to LED-compatible Relay if you are installing it on the front side of MT-09.
I felt that I could not believe it as soon as I bought it and opened it and checked the contents.
Because it was Universal Product of Bullet Terminal connection premise despite Yamaha's OEMOption.
Attachment to be attached to the car body is also included, so I wanted at least that the conversion Coupler adapted to the car body of Yamaha was included as well.
Although it is still ahead of the story, considering selling the car body, it is inevitable to change Main harness.
So I am buying a 250 type CN Female 2 - pole Coupler at the mail order site selling Couplers related to cars, and Bolt - onSpec. I am connecting with.
Electric Works Pliers 1 pc If you do not think about anything, you can exchange even an amateur with knowledge of the extent that you have easily examined with Net if you have it, but you want to devise another thing after thinking about it later.
View detail
Purchase with Option
With vehicle purchase option
It is installation to hide ETC's Wiring
Although appearance should not break the design of the car body,
It is too small as Screen to function
Other company products may be better if retrofitting - - -.
View detail
Reliable OEM Parts Number
I installed it when purchasing the body.
I think that there is Screen is cool.
The windbreak effect is almost none on the general road, and on the expressway, the stomach area is protected. It will be appropriate if you lie down..
View detail
The effect is
This Screen has some windproof effect. I frequently use high speed, continuous high speed driving is 120 kilometers or more, at the speed more than it will be stronger. I hope to have a Length a bit more upward. Also, please note Screw quadrilateral fixed Screw if you install by yourself.
It is probably Nylon. Because it is unusually lightly Nylon, it is easy to lose the threads, let's carefully tighten not to overtighten. Even if you lick it you can purchase separately as a part.
View detail