Reviews
Fits: HONDA Ape 100, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard
Carrying out step plate wearing, it was one-shot dissolution in Colet wearing that the lever was long distance miss-shifting running fire. Since it was expensive, it was wavering, but he bought it, and it was a correct answer. Ideas goods part? Hi
Carrying out step plate wearing, it was one-shot dissolution in Colet wearing that the lever was long distance miss-shifting running fire.
Since it was expensive, it was wavering, but he bought it, and it was a correct answer.
Ideas goods part? High one is regrettable.
View detail
Power with what [ useless by supporting a fulcrum with this product ] felt hardness when it was the touch which the feel of the change made Kuche or put in to a Second gear was unnecessary, and it changed to what was made into the snap. Since it was a
Power with what [ useless by supporting a fulcrum with this product ] felt hardness when it was the touch which the feel of the change made Kuche or put in to a Second gear was unnecessary, and it changed to what was made into the snap.
Since it was a reverse vehicle, a pure plate and gasket were required, but Mr. Webike paid immediately.
I think that they are cost-effective goods.
View detail
![[IDEAL] Rearset](https://global.webike-cdn.net/photo/article/93/1254818894093L.jpg)
Although it was not dissatisfied to a run [ at the step of normal ] among a town, since the sale article list was suited when it considered whether there would be any position which suited itself to a slight degree to the circuit run, it purchased. It
Although it was not dissatisfied to a run [ at the step of normal ] among a town, since the sale article list was suited when it considered whether there would be any position which suited itself to a slight degree to the circuit run, it purchased.
It decided by the manufacturer of what or the thing a reverse change is [ a thing / having no processing of a cowl, and ] possible although groped.
Although attachment of the main part itself is very easy, if wiring of a rear brake lamp buys even the coupler of ..., however scalpel 2 pole for the electrical and electric equipment also with the easy work for itself and is attached to it by it, it will remove the switch of normal and will be Pons. [ weak ]
I think that a screw lock agent is always at the time of assembly.
A position has selection too much and will waver.
I think that I will look for a location good from now on.
Moreover, color chose safe silver.
Since it may become full of cracks by the metal fittings of the present boots although a manufacturer's gold and Black are also good .. It is since a crack is not conspicuous in case of silver, either.. For the moment, it is not dissatisfied.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZX-6RR
The position of 9R is at its form. It is the touch to which the lower half of the body lengthened the guide peg for a while to the lower one although the settlement of the upper half of the body was good. The upper half of the body was not able to be bala
The position of 9R is at its form. It is the touch to which the lower half of the body lengthened the guide peg for a while to the lower one although the settlement of the upper half of the body was good. The upper half of the body was not able to be balanced.
The motorcycle which actually equipped with this step is also straddled. Without it sees the thing by Schopp Kawasaki = only in the image of BEET, it was decided that it would be BEET and it purchased.
The position became better than normal.
to a slight degree -- the location of a step -- it may be high -- although that is right Since it may be hard to put power into a step and may become it, when the location of a step becomes high This height may be the best too.
Although a step is shorter than other manufacturers and Schopp's product When it is itself, there is no fault.
This shortness is a spartan on the contrary.
The form of the brake pedal differed from MONO of the former catalogue.
It is a design of a wind now.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ400R, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ER-4n, KAWASAKI 1400GTR, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI Z750 (water-cooled)
The its original work back step was attached to ZZR-600, and the multi-step was attached to fine adjustment of a step position. Step height became a position of the rule highest perfectly. Since the rubber of the normal step was coming as HETA, th
The its original work back step was attached to ZZR-600, and the multi-step was attached to fine adjustment of a step position.
Step height became a position of the rule highest perfectly.
Since the rubber of the normal step was coming as HETA, the feel of aluminum steps and the grip of boots are very well satisfactory.
View detail
Fits: YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker
It attached to SEROW 250. I hope easy and that you do not separate since attachment is a bolt stop. metal -- although it is unreserved and the edge does not stand -- spikes mind -- clever normal -- if -- although the intense damage to the sole was
It attached to SEROW 250.
I hope easy and that you do not separate since attachment is a bolt stop.
metal -- although it is unreserved and the edge does not stand -- spikes mind -- clever normal -- if -- although the intense damage to the sole was anxious, he can feel easy about this.
Moreover, probably, durability will also be OK, since it does not slide and is considerably thick.
Although the only minus point is a price, I think that it is cheap rather than he rebuys shoes at an early stage.
In addition, the part foot position of the thickness of a rubber goes up by about 2 cm.
View detail
The kind of quite many [ custom parts / of YAMAHA SR400 correspondence ] is released. Probably the kind of numerousness will be the top-level number of items in a domestic car. This time, many change assists of a boa ace which is allowed to introd
The kind of quite many [ custom parts / of YAMAHA SR400 correspondence ] is released.
Probably the kind of numerousness will be the top-level number of items in a domestic car.
This time, many change assists of a boa ace which is allowed to introduce is the very interesting custom parts also in the parts of the SR400 existing correspondence.
Although this change assist is not parts of a kind which a motorcycle upgrades, it can make the shift change of SR400 a smooth considerably by equipping here.
Although it is not having restricted to SR400, surely impossible power occurs on a configuration and it is hard to move the mechanism of the shift change of a motorcycle to a smooth.
Almost all vehicle types make go up and down a shift pedal, and the shift change of the motorcycle is performing the shift change to rotate in the form which twists the tip of a change shaft.
That is, the power of the upper and lower sides which Rider inputted as the shift change through the shift pedal is completed by making it change into rotation.
In fact, a problem occurs here.
Up-and-down power is not convertible for rotary motion at a smooth.
It appears more notably [ as it becomes an engine with the configuration where a change shaft is long ].
The power of a direction of rotation will escape to the upper and lower sides or right and left at the tip of a shaft, and a shift change will become impossible to a smooth.
The mechanism of the change assist of a boa ace is simple, is the method of supporting also at the tip the shaft which performs a shift change, and prevents the recess of power which occurs in a shift change as much as possible.
Even though this simple configuration becomes an operative greatest thing for the old vehicles of a design like SR400 and does not carry out power up, they are the effective parts which thought the run as important of raising the operativity of each part at the time of a run.
Although many tuning parts for raising Power to a limit are released, they are items to carry out the recommend of the operation of each part to very much since custom parts aiming at moving to a smooth more than pure are very new.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250
Since a pure shift was not pleasing, this product was purchased. Attachment is also very easy and appearance is also individually satisfied with pure one which is said farther of attachment. However, when raising a shift, since it was a rubber if
Since a pure shift was not pleasing, this product was purchased.
Attachment is also very easy and appearance is also individually satisfied with pure one which is said farther of attachment.
However, when raising a shift, since it was a rubber if pure, it did not think it is hard and painful, but since this product is not a rubber, it may feel hardness and painfulness a little.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR250, HONDA NSR250R, SUZUKI GSX1400, SUZUKI SV1000S, HONDA 400X, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB250F, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB400SF, HONDA CB400SF
SUZUKI GSX1400 was equipped. Direction of a return spring was puzzled just for a moment at the time of wearing. Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a
SUZUKI GSX1400 was equipped.
Direction of a return spring was puzzled just for a moment at the time of wearing.
Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a spring well.
However, even if it does not enter, since maintenance is possible, it is satisfactory at all on actual use.
Attachment was completed in about 10 minutes.
Although the step of silver was attached, it is glossy and appearance is racy perfectly.
If it actually rides, a notch grips in shoes, and does not slide even on a rainy day, but is comfortable.
With the thing without a bank sensor, since the angle of bank slit upwards aslant, it became deeper than normal.
Instead, since the overall length of a step is slightly short, the shoes point grounds with THE.
It is large satisfaction synthetically.
However, it is an one star minus regarding direction of a spring.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ400R, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ER-4n, KAWASAKI 1400GTR, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI Z750 (water-cooled)
It attached to Ninja250R. It was cheaper than the back step, and since it moved although it is 15 mm in radii of normal, it put in. although it does in various its cases and they are made into the normal valve position after all -- so much -- also
It attached to Ninja250R.
It was cheaper than the back step, and since it moved although it is 15 mm in radii of normal, it put in.
although it does in various its cases and they are made into the normal valve position after all -- so much -- also coming out -- unlike normal, it was hard to slide on a step, and the touch which appearance also carried out custom comes out and is satisfied.
View detail
Fits: SUZUKI GSX1000S KATANA, SUZUKI GSX1100S KATANA, SUZUKI GSX750S KATANA, SUZUKI GSX750S KATANA
It is used in 1100 katanas. With the pure rubber, touch that straddle is not effective was disagreeable and exchanged. Since food Itsuki of a boots bottom is completely different, the sense of stability of the body in a corner is improved consider
It is used in 1100 katanas.
With the pure rubber, touch that straddle is not effective was disagreeable and exchanged.
Since food Itsuki of a boots bottom is completely different, the sense of stability of the body in a corner is improved considerably.
although it seldom changes in position -- a feeling -- it becomes the impression which became high.
Since quality is also high and does not become cheap touch, are they the goods optimal also as a dress-up up?
View detail
It decides carrying the 2nd automobile inspection into an inspection field by oneself, and receiving it. Since it can do what without a tandem step, it purchases immediately. Since it was the cut necessity for a rear fender according to the attach
It decides carrying the 2nd automobile inspection into an inspection field by oneself, and receiving it.
Since it can do what without a tandem step, it purchases immediately.
Since it was the cut necessity for a rear fender according to the attachment description, the circumference of a tail was made into nakedness, but even if not cut after all, when pushing in stay, it has attached.
However, since the stay of the tandem step was attached to the top of a frame in order to avoid interference with right-hand side silencer stay and the reserver of an ohlins, the work of a side cover part cut occurred.
Although texture is OK, it will be saved if some are cheaper.
View detail
It purchased for disk-izing of the ape 50. Although it had become ape 50 / 100, in equipping, there is a small problem and many things were not able to be called unprocessed bolt-on. I thought that it was unprocessed and was attached since it is c
It purchased for disk-izing of the ape 50.
Although it had become ape 50 / 100, in equipping, there is a small problem and many things were not able to be called unprocessed bolt-on.
I thought that it was unprocessed and was attached since it is called the object for apes.
He repents [ that what was necessary was having considered a price and accuracy just to have made on one's own and ].
At the beginning, although he planned to have made on one's own, and the goods here were purchased since it was troublesome, some will be processed in wearing after all.
View detail
It is attachment to SR500 of the position (type which is not a back step) of normal. Although it is the car body which ran 40,000 km or more, it is GACHAN firmly after wearing! GACHAN ! and a gear came to enter. Since the load to the shaft of a ge
It is attachment to SR500 of the position (type which is not a back step) of normal.
Although it is the car body which ran 40,000 km or more, it is GACHAN firmly after wearing! GACHAN ! and a gear came to enter.
Since the load to the shaft of a gear is not generated, there are no evils, like a shift touch becomes heavy.
They are parts to carry out the recommend of the attachment to very much.
* Even if it sees a manufacturer's website and description of item, it is not written in detail, but there is [ the sprocket cover of normal, or ] nothing to worry about not wanting to break down a normal look, since it can attach by easy processing which is possible at home.
View detail
Since the rubber which was being used before deteriorated and it had become dirty, it considered and purchased in a new thing. It is a thing of an ordinary rubber, furthermore I say since this was used since it was small, and think that it is perfect
Since the rubber which was being used before deteriorated and it had become dirty, it considered and purchased in a new thing.
It is a thing of an ordinary rubber, furthermore I say since this was used since it was small, and think that it is perfect accessories feeling since a run does not necessarily change.
Since its own motorcycle was merely based on blue and ivory, and the blue rubber was found, it was good.
I think that a price is also reasonable, and they are goods good for being dressed up at a low price since a color also has black and red besides blue.
View detail
Moreover, the elementary-stream forme of aluminum is good at attachment with it. [ a cheap price and ] [ easy ]
Moreover, the elementary-stream forme of aluminum is good at attachment with it. [ a cheap price and ] [ easy ] View detail
![[IDEAL] Rearset Kit](https://img.webike-cdn.net/catalogue/10918/002-a006sv_TS.jpg)
Any sense of incongruity could not be found, and it came exactly, so that if this one is purer was thought. The location of normal is past before past [ the bottom ], and since the reaction to the load input to the inn side step was too blunt, after c
Any sense of incongruity could not be found, and it came exactly, so that if this one is purer was thought.
The location of normal is past before past [ the bottom ], and since the reaction to the load input to the inn side step was too blunt, after conversion becomes easy to carry out control of an angle of bank.
Although it was satisfied to the operativity of the pure rear brake, the touch became good suddenly.
It is touch that a linear understands even the situation of a pad.
View detail
Battle step Since it equipped with type R, a tandem step kit is also purchased. The touch with which it equipped is the highest (those with a high grade feeling). I think ?, if there are type R and an integral type and it is good also in design.
Battle step Since it equipped with type R, a tandem step kit is also purchased.
The touch with which it equipped is the highest (those with a high grade feeling).
I think ?, if there are type R and an integral type and it is good also in design.
A difficulty is that an attachment manual is incomprehensible.
It did not turn out to be an one-point stop.
It is intelligible if a picture is also attached! I am glad when an after color can also be chosen.
View detail
Since it would turn at an authentic positive one if it falls, it is looking for the retractable type and arrived at this product. Although structure is good, becoming slightly uneasy compares pure and, in a bolt, thin one ...
Since it would turn at an authentic positive one if it falls, it is looking for the retractable type and arrived at this product.
Although structure is good, becoming slightly uneasy compares pure and, in a bolt, thin one ...
View detail
2006 Cling to KSR110. Since it was as whether there are any goods raised upwards without shifting a step position back since the step was sometimes called GARITSU! also in the run of an urban area several times when he noticed, and a request of the pl
2006 Cling to KSR110.
Since it was as whether there are any goods raised upwards without shifting a step position back since the step was sometimes called GARITSU! also in the run of an urban area several times when he noticed, and a request of the place and the it who searched, it purchased and attached.
Although height is changed into three steps, I am using it in the location of middle.
Since the knee is narrow if it is the top truly.
It is whether although a high grade feeling also comes out compared with the step of normal, what it is easy to slide on on a rainy day is a fault,
View detail